Characterization and electrochemical properties of Pt nanoparticles deposited on titanium oxide nanofibers
Source abstract
Abstract
Abstract To overcome problems with carbon corrosion, titanium oxide nanofibers (TNFs) were investigated as alternative supports for the deposition of Pt nanoparticles. In this work, pristine or Nb-doped TNFs were prepared using an electrospinning technique. Pt nanoparticles were deposited on the selected TNFs using a microwave-assisted polyol method. Nb doping and heat treatment in reducing atmospheres significantly affected the fiber diameter, grain size, oxygen vacancies, and electrical conductivity of the TNFs. The incorporation of Nb into the TiO2 lattice inhibited grain growth and phase transition in an oxidizing atmosphere. However, heat treatment in a reducing atmosphere resulted in a significant increase in grain size. As a result of Nb doping associated with heat treatment at 800 °C in a reducing atmosphere, all the anatase phase was converted to the rutile phase. In addition, Ti4+ was reduced to Ti3+, and Nb5+ was reduced to Nb4+. These transformations could be the basis for high electrical conductivity. The electrochemical surface area (ECSA) of Pt/Nb-TNF800 was 48 m2/g. The durability of the ECSA of this material was much distinguished compared to that of a commercial Pt/C catalyst.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Hydrogen: an overview10.1021/cr050200z ↗
2. Support materials for PEMFC and DMFC electrocatalysts—a review10.1016/j.jpowsour.2012.02.011 ↗
3. Review of the anatase to rutile phase transformation10.1007/s10853-010-5113-0 ↗
4. Density functional theory study of the brookite surfaces and phase transitions between natural titania polymorphs10.1021/jp0643000 ↗
5. Photoactivity and phase stability of ZrO2-doped anatase-type TiO2 directly formed as nanometer-sized particles by hydrolysis under hydrothermal conditions10.1016/S0022-4596(02)00013-0 ↗
6. Influence of nitrogen doping on the defect formation and surface properties of TiO2 rutile and anatase
7. Kinetics of the anatase-rutile transformation10.1111/j.1151-2916.1965.tb14774.x ↗
8. Formation of rutile nuclei at anatase {112} twin interfaces and the phase transformation mechanism in nanocrystalline titania10.2138/am-1999-5-621 ↗
9. Phase transformation and grain growth of doped nanosized titania10.1016/S0928-4931(01)00409-X ↗
10. Single step elaboration of size-tuned Pt loaded titania nanofibres10.1039/c1cc11716e ↗
11. Core-shell structured silicon nanoparticles@TiO2-x/carbon mesoporous microfiber composite as a safe and high-performance lithium-ion battery anode10.1021/nn500278q ↗
12. High surface area Ti-based mixed oxides nanofibers prepared by electrospinning10.1016/j.matlet.2014.07.085 ↗
13. Doped TiO2 aerogels as alternative catalyst supports for proton exchange membrane fuel cells: a comparative study of Nb, V and Ta dopants10.1016/j.micromeso.2016.06.003 ↗
14. Photoemission and STM study of the electronic structure of Nb-doped TiO210.1103/PhysRevB.61.13445 ↗
15. Titanium dioxide for solar-hydrogen V. Metallic-type conduction of Nb-doped TiO210.1016/j.ijhydene.2006.09.008 ↗
16. Improved electrocatalytic activity of Pt supported onto Fe-doped TiO2 toward ethanol oxidation in acid media10.1016/j.matchemphys.2020.122753 ↗
17. Catalytic activity of titanium oxide for oxygen reduction reaction as a non-platinum catalyst for PEFC10.1016/j.electacta.2006.08.059 ↗
18. Electrocatalytic activity and stability of niobium-doped titanium oxide supported platinum catalyst for polymer electrolyte membrane fuel cells10.1016/j.apcatb.2010.02.025 ↗
19. On the effect of non-carbon nanostructured supports on the stability of Pt nanoparticles during voltage cycling: a study of TiO2 nanofibres10.1016/j.jpowsour.2014.01.112 ↗
20. Electrospun Nb-doped TiO2 nanofiber support for Pt nanoparticles with high electrocatalytic activity and durability10.1038/srep44411 ↗
21. Supercapacitor of TiO2 nanofibers by electrospinning and KOH treatment10.1016/j.matdes.2016.05.025 ↗
22. Improved electrocatalytic activity of ethanol oxidation over Pd/TiO2 nanofibers-carbon black nanocomposite10.1016/j.matchemphys.2020.123317 ↗
23. Design of active Pt on TiO2 based nanofibrous cathode for superiorPEMFC performance and durability at high temperature10.1016/j.apcatb.2016.11.053 ↗
24. Electrical properties of Cr- and Nb-doped TiO2, thin films10.1016/0169-4332(93)90665-X ↗
25. Effects of Nb doping on the anatase-tortile phase transition10.1063/1.1487915 ↗
26. Ambient-temperature waterborne polymer/rGO nanocomposite films: effect of rGO distribution on electrical conductivity10.1021/acsami.9b19183 ↗
27. Probing paramagnetic species in titania-based heterogeneous photocatalysis by electron spin resonance (ESR) spectroscopy—a mini review10.1016/j.cej.2010.12.002 ↗
28. The formation and detection techniques of oxygen vacancies in titanium oxide-based nanostructures10.1039/C8NR09666J ↗
29. Surface area loss of supported platinum in polymer electrolyte fuel cells10.1149/1.2220925 ↗
30. Temperature stability of sputtered niobium–oxide films10.1063/1.1458052 ↗
31. Synthesis and structural properties of niobium pentoxide powders: a comparative study of the growth process
32. Photoelectron spectroscopy of nanocrystalline anatase TiO2 films10.1016/j.apsusc.2005.02.002 ↗
33. XPS and UPS characterization of the TiO2/ZnPcGly heterointerface: alignment of energy levels10.1021/jp014192b ↗
34. Effects of particle size on surface electronic and electrocatalytic properties of Pt/TiO2 nanocatalysts10.1039/B916335B ↗
35. Physical and electrochemical characterizations of microwave-assisted polyol preparation of carbon-supported PtRu nanoparticles10.1021/la035204i ↗