journal article·2007-02

Electrochemical behavior of sintered YAG dispersed 316L stainless steel composites

S. Balaji, A. Upadhyaya

Materials Chemistry and Physics· Volume 101· Issue 2-3
Publisher page

Abstract

Abstract The present work investigates the effect of second phase dispersoid addition and sintering temperature on the corrosion behavior of austenitic (316L) stainless steels. Yttrium aluminum garnet (YAG) was added as second phase to the austenitic stainless steels in varying amounts (1, 2.5 and 7.5 wt.%), and the compacts were sintered at 1200 and 1400 °C corresponding to solid-state and supersolidus sintering, respectively. The sintered samples were characterized for their corrosion resistance in 0.1N H 2 SO 4 using potentiodynamic polarization. It is shown that YAG addition does not appreciably increase corrosion rate of 316L compacts. However, as compared to solid-state sintering, supersolidus sintering resulted in superior corrosion resistance. The electrochemical behavior of the 316L–YAG composites with sintering temperature is correlated to the densification response and microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Otero · Corros. Sci. · 1999 · 40 · 142110.1016/S0010-938X(98)00047-X ↗
2. Shankar · Corrosion Sci. · 2004 · 46 · 48710.1016/S0010-938X(03)00144-6 ↗
3. Otero · Can. Metall. Quart. · 1997 · 36 · 6510.1016/S0008-4433(96)00032-8 ↗
4. Velasco · Mater. Sci. Tech. · 1997 · 13 · 84710.1179/mst.1997.13.10.847 ↗
5. Patankar · Powder Metall. · 2000 · 43 · 35010.1179/003258900666078 ↗
6. S. Lapusan, V. Candea, C. Popa, Corrosion resistance of a sintered austenitic stainless steel, in: Proceedings of 1998 PM World Congress, EPMA, Shrewsbury, UK, vol. 3, 1998, p. 507.
7. L. Fedrizzi, A. Molinari, F. Deflorian, A. Tiziani, P. Bonora, On the corrosion resistance of sintered austenitic stainless steel, in: Proceedings of the PM’90 International Conference on Powder Metallurgy, EPMA, Shrewsbury, UK, vol. 2, 1990, p. 319.
8. Wang · Int. J. Powder Metall. · 1986 · 22 · 141
9. Deflorian · Werkstoffe Korros. · 1992 · 43 · 44710.1002/maco.19920430907 ↗
10. Preusse · Powder Metall. · 1999 · 42 · 5110.1179/003258999665413 ↗
11. Molinari · Powder Metall. · 1994 · 37 · 11510.1179/pom.1994.37.2.115 ↗
12. R. Tandon, Y. Liu, R.M. German, High density processing of ferrous alloys via supersolidus liquid phase sintering, in: Advances in Powder Metallurgy Particulate Materials 1995, MPIF, Princeton, NJ, USA, vol. 2, 1995, p. 5.23.
13. German · Metall. Mater. Trans. A · 1997 · 28 · 155310.1007/s11661-997-0217-0 ↗
14. Cambal · Inter. J. Powder Metall. · 1972 · 8 · 131
15. Jain · Mater. Lett. · 2004 · 58 · 203710.1016/j.matlet.2003.12.022 ↗
16. Supersolidus liquid phase sintering of austenitic stainless steel–yttria composites
17. German · Inter. J. Powder Metall. · 1997 · 33 · 49
18. Sedriks · 1996
19. Fontana · 1986
20. Gabe · Powder Metall. · 1977 · 20 · 22710.1179/pom.1977.20.4.227 ↗
21. E. Ahlberg, P. Engdahl, R. Johansson, An electrochemical investigation of the corrosion behavior of sintered stainless steels, in: Proceedings of World Conference on Powder Metallurgy, EPMA, Shrewsbury, UK, vol. 1, 1990, p. 419.