Selective laser melting-fabricated alumina-forming medium-entropy alloys for high-temperature corrosion resistance and liquid-metal compatibility in lead-bismuth eutectic
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. Environmental degradation of structural materials in liquid lead-and lead-bismuth eutectic-cooled reactors10.1016/j.pmatsci.2022.100920 ↗
2. Corrosion resistance of Mn-Containing AFA alloys in LBE at 550 °C with controlled oxygen concentration of 10−6 wt%10.3390/ma18061328 ↗
3. Corrosion behavior in lead-bismuth eutectic of 316 L stainless steels fabricated by laser-based powder bed fusion and powder metallurgy-hot isostatic pressing10.1016/j.corsci.2025.112911 ↗
4. Additive manufactured ODS-FeCrAl steel achieves high corrosion resistance in lead-bismuth eutectic (LBE)10.1016/j.jnucmat.2024.155516 ↗
5. Behavior of Fe-based alloys in a liquid lead-bismuth environment under simultaneous proton irradiation and corrosion10.1016/j.actamat.2024.120578 ↗
6. Corrosion behavior of FeCr13Alx alloys in static lead-bismuth eutectic (LBE) at 500 °C under saturated/poor oxygen concentrations10.1016/j.jallcom.2025.180473 ↗
7. The effects of cold working on the corrosion behavior of an austenitic stainless steel in liquid lead-bismuth eutectic under vacuum at 873 K10.1016/j.jnucmat.2018.07.034 ↗
8. Nano-scale corrosion mechanism of T91 steel in static lead-bismuth eutectic: a combined APT, EBSD, and STEM investigation10.1016/j.actamat.2024.119883 ↗
9. Dissolution corrosion of FeCrAl alloy exposed to oxygen-depleted lead-bismuth eutectic containing Ni impurities at 600 °C
10. Advances in the corrosion behavior of high-entropy alloys in lead-bismuth eutectic system10.1002/adem.202402774 ↗
11. Compatibility and microstructure evolution of Al-Cr-Fe-Ni high entropy model alloys exposed to oxygen-containing molten lead10.1016/j.corsci.2021.109593 ↗
12. Intergranular precipitation-enhanced wetting and phase transformation in an Al0.4CoCrFeNi high-entropy alloy exposed to lead-bismuth eutectic10.1016/j.corsci.2021.110038 ↗
13. Oxidation and dissolution behavior of FeCrNiAl based high entropy alloy and alumina-forming austenitic steel exposed to lead-bismuth eutectic (LBE)10.1016/j.corsci.2023.111693 ↗
14. Influence of alloying elements (Cu, Ti, Nb) on the microstructure and corrosion behaviour of AlCrFeNi-based high entropy alloys exposed to oxygen-containing molten Pb10.1016/j.corsci.2021.109659 ↗
15. Liquid metal embrittlement susceptibility of a high-entropy alloy exposed to oxygen-depleted liquid lead-bismuth eutectic at 250 and 350 °C10.1016/j.jnucmat.2019.151859 ↗
16. Reducing the cobalt inventory in light water-reactors10.13182/NT85-A33563 ↗
17. Heterogeneous structure induced excellent mechanical and wear properties in Co-free FeCrAlNi medium-entropy alloys10.1016/j.jmrt.2022.04.093 ↗
18. AlCrCuFeNi3 Dual-phase high-entropy alloy manufactured by selective laser melting in situ alloying: alloying degree, microstructure, and strength10.1002/adem.202401472 ↗
19. Effect of Ti addition on corrosion behaviors of Fe-Ni-Cr-Al high entropy alloys exposed to static lead-bismuth eutectic at 550 °C10.1016/j.corsci.2024.112286 ↗
20. Enhancing LBE corrosion resistance through inhibition diffusion approach for AlTixCrFe HEA coating10.1016/j.apsusc.2024.160535 ↗
21. Local mechanical properties of corrosion layers formed on T91 and SS316L steels after exposure to static liquid LBE at 500 °C for 1000h obtained by nano-indentation10.1016/j.net.2024.03.005 ↗
22. The corrosion behavior of Al/Al2O3 composite films with ultra-dense structure exposed to lead-bismuth eutectic at 450–650 °C10.3390/coatings13071274 ↗
23. Effect of phase configuration on corrosion behavior of Fe-20Ni-15Cr-4.5Al alumina-forming austenitic steel in liquid lead-bismuth10.1016/j.jnucmat.2025.155888 ↗
24. Enhancing high-temperature corrosion and cracking resistance of a dual-phase high entropy alloy through surface grinding10.1016/j.corsci.2025.113227 ↗
25. Fe-14Ni-14Cr-2.5Al steel showing excellent corrosion-resistance in flowing LBE at 550 °C and high temperature strength10.1016/j.jnucmat.2023.154703 ↗
26. Corrosion behavior of additively manufactured AlCrFeNi in lead-bismuth eutectic: dendritic oxides layer facilitate resistance to corrosion spalling10.1016/j.jmrt.2025.05.136 ↗
27. A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures10.1016/j.scriptamat.2021.114132 ↗
28. An as-cast high-entropy alloy with remarkable mechanical properties strengthened by nanometer precipitates10.1039/C9NR08338C ↗
29. Characterization of oxide dispersed AlCoCrFe high entropy alloy synthesized by mechanical alloying and spark plasma sintering10.1007/s12666-013-0268-4 ↗
30. Thermo-hydraulic performance evaluation through experiment and simulation of additive manufactured Gyroid-structured heat exchanger10.1016/j.applthermaleng.2024.122402 ↗
31. A review on manufacturing pure refractory metals by selective laser melting10.1007/s11665-024-09693-z ↗
32. Mechanical characterization and performance of reduced scale mock-up for the CFETR first wall manufactured by SLM process10.1016/j.fusengdes.2022.113235 ↗
33. BUEHLER L. Fabrication of thin-walled fusion blanket components like flow channel inserts by selective laser melting10.1016/j.fusengdes.2019.03.184 ↗
34. Selective laser melting additive manufacturing of advanced nuclear materials V-6Cr-6Ti10.1016/j.matlet.2017.08.014 ↗
35. A precipitation hardened austenitic stainless steel with excellent stress corrosion cracking resistance against high-temperature water10.1016/j.corsci.2025.113352 ↗
36. Review on residual stress in selective laser melting additive manufacturing of alloy parts10.1016/j.optlastec.2020.106283 ↗
37. SLM lattice structures: properties, performance, applications and challenges
38. A review of research progress in Selective Laser Melting (SLM)10.3390/mi14010057 ↗
39. State-of-the-art of selective laser melting process: a comprehensive review10.1016/j.jmsy.2022.04.002 ↗
40. A process parameters review on selective laser melting-based additive manufacturing of single and multi-material: microstructure, physical properties, tribological, and surface roughness
41. Additive manufacturing of high entropy alloys: a practical review10.1016/j.jmst.2020.11.029 ↗
42. Predicting intergranular stress corrosion cracking of stainless steels in high-temperature water by incorporating crystallographic factor10.1016/j.actamat.2025.121322 ↗
43. Corrosion testing of additively manufactured FeCrAl alloy in LBE10.1007/s11837-021-04947-w ↗
44. Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing10.1016/j.corsci.2020.108954 ↗
45. Oxidation behavior of CoCrFeMnNi high-entropy alloy fabricated by selective laser melting10.1007/s12540-023-01415-9 ↗
46. Additive manufacturing of metals: microstructure evolution and multistage control10.1016/j.jmst.2021.06.011 ↗
47. Comparison of solid metal-metal oxide reference electrodes for potentiometric oxygen sensors in liquid lead-bismuth eutectic operating at low temperature ranges10.1016/j.snb.2015.03.004 ↗
48. Dissolution Condensation mechanism of stress corrosion cracking in liquid metals: driving force and crack kinetics10.1007/s11661-010-0429-6 ↗
49. Dissolution mechanism of 316L in lead-bismuth eutectic at 500 °C10.1016/j.corsci.2011.05.031 ↗
50. Multiscale insights into temperature effects on the sliding wear of a martensitic stainless steel10.1016/j.jmrt.2025.06.102 ↗
51. Variety of yield strength caused by precipitations of L12-Ni3Al and B2-NiAl phases in alumina-forming austenitic steel
52. Formation of heterogeneous nucleation of B2-NiAl in hot rolled Fe-Mn-Al-C Plate: a novel composition and processing route for lightweight high strength steel containing nickel10.3390/met14121342 ↗
53. Effect of aging treatment on structure and mechanical properties of new heat-resistant steels
54. Rational design and multi-stage formation mechanisms of FeCrNiAl medium-entropy alloy strengthened by multi-scaled dual phases10.1016/j.matchar.2022.112430 ↗
55. Barrier effect of intergranular precipitation in alumina-forming austenitic steel against dissolution corrosion exposed to lead-bismuth eutectic10.1016/j.corsci.2024.112643 ↗
56. Dissolution corrosion of 316L austenitic stainless steels in contact with static liquid lead-bismuth eutectic (LSE) at 500 °C10.1016/j.jnucmat.2017.04.004 ↗
57. Effect of deformation twinning on dissolution corrosion of 316L stainless steels in contact with static liquid lead-bismuth eutectic (LBE) at 500 °C10.1016/j.jnucmat.2018.08.030 ↗
58. Effect of irradiation defects on the corrosion behaviors of steels exposed to lead bismuth eutectic in ADS: a first-principles study10.1039/C5CP00359H ↗
59. Liquid metal embrittlement and fracture behavior of three Mo metals in liquid lead-bismuth eutectic10.1016/j.jnucmat.2024.155434 ↗
60. A Short review of high-temperature wetting and complexion transitions with a critical assessment of their influence on liquid metal embrittlement and corrosion10.5006/1925 ↗
61. Impurity effects on the intergranular liquid bismuth penetration in polycrystalline nickel10.1016/j.actamat.2011.09.034 ↗
62. Interfacial free energies, nucleation, and precipitate morphologies in Ni-Al-Cr alloys: Calculations and atom-probe tomographic experiments10.1016/j.actamat.2019.01.017 ↗
63. Grain boundary wetting and prewetting in Ni-doped Mo10.1063/1.3155443 ↗
64. Interface morphologies and embrittlement behavior of α-Fe in liquid lead-bismuth eutectic at elevated temperature10.1016/j.matchar.2018.10.017 ↗
65. Grain boundary diffusion and wetting in the analysis of intergranular penetration10.1016/j.msea.2007.10.107 ↗
66. Austenite growth and stability in medium Mn, medium Al Fe-C-Mn-Al steels10.1016/j.commatsci.2016.08.041 ↗
67. A novel AlCrFeMoTi high-entropy alloy coating with a high corrosion-resistance in lead-bismuth eutectic alloy10.1016/j.corsci.2021.109524 ↗
68. AlN-assisted internal oxidation behavior in Al-containing high Mn steels10.1016/j.matchar.2022.111967 ↗
69. Effect of crystal orientation of AlN coatings on its high temperature oxidation in wet air10.1016/j.jeurceramsoc.2023.10.001 ↗
70. Oxidation behavior of the AlN coatings on the TiAl alloy at 900 °C10.1016/j.corsci.2022.110891 ↗
71. Mitigating grain boundary gd segregation to enhance high-temperature oxidation resistance in Mg-6Gd-1Al alloy: A comparative microstructural study10.1016/j.corsci.2025.113256 ↗
72. Thermochemical properties of inorganic substances
73. Corrosion resistance and microstructural stability of austenitic Fe-Cr-Al-Ni model alloys exposed to oxygen-containing molten lead10.1016/j.jnucmat.2019.06.043 ↗
74. The influence of Y and Nb addition on the corrosion resistance of Fe-Cr-Al-Ni model alloys exposed to oxygen-containing molten Pb10.1016/j.corsci.2020.109152 ↗
75. Understanding corrosion behavior differences of Al-modified and Si-modified austenitic steels in lead-bismuth eutectic with 10–6 wt% oxygen at 600°C for up to 6000h through multiscale characterization10.1016/j.corsci.2025.113099 ↗
76. Design of alumina-forming austenitic stainless steel using genetic algorithms
77. Synergy of Nanocrystallinity, Temperature, and "the Third Element Effect" for Uncommon Oxidation Resistance of Fe-Cr-Al Alloys10.1002/smll.202404409 ↗
78. Ellingham diagram: a new look at an old tool10.1016/j.corsci.2023.111113 ↗
79. Beneficial effect of grain refinement on the oxidation resistance of T91 steel exposed to liquid lead-bismuth eutectic
80. Enhanced corrosion resistance of 15-15Ti austenitic steel in liquid lead-bismuth eutectic at 550 °C by shot peening processing10.1016/j.corsci.2023.111640 ↗
81. High-resolution characterization revealing the effect of dissolved oxygen in lead-bismuth eutectic (LBE) on oxide scale and subsurface phase transformation layer in alumina-forming austenitic (AFA) steel10.1016/j.corsci.2024.112671 ↗
82. Corrosion behavior in lead-bismuth eutectic of 316 L stainless steels fabricated by laser-based powder bed fusion and powder metallurgy-hot isostatic pressing10.1016/j.corsci.2025.112911 ↗
83. Corrosion behavior of extra-high-purity type 316 austenitic stainless steel in a liquid lead-bismuth eutectic with oxygen saturation or low oxygen concentrations10.1016/j.corsci.2025.113173 ↗
84. A comparative study on the corrosion performance of four FeCrAl alloys with different Cr contents in contact with oxygen-saturated LBE10.1016/j.jmrt.2023.02.033 ↗
85. Effect of oxygen on corrosion of an alumina-forming duplex steel in static liquid lead-bismuth eutectic at 550 °C10.1016/j.corsci.2021.109591 ↗
86. Corrosion resistance of Mn-containing AFA Alloys in LBE at 550 °C with controlled oxygen concentration of 10–6 wt%10.3390/ma18061328 ↗
87. Corrosion behaviour of Al-added high Mn austenitic steels in molten lead bismuth eutectic with saturated and low oxygen concentrations at 450 °C10.1016/j.corsci.2020.108864 ↗