Passivation and corrosion behavior of LDSS 2101 in calcium sulfoaluminate cements with different temperatures
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Electrochemical behavior of steel bars in magnesium phosphate cement10.1016/j.cemconres.2023.107167 ↗
2. The use of TEA·H3PO4 and TEA·C18H30O3S as eco-friendly corrosion inhibitors in cementitious materials: an experimental and theoretical study10.1016/j.cemconres.2022.107073 ↗
3. Effect of alternating temperature on passivation characteristics of carbon steel in chloride-free saturated Ca(OH)2 solution10.1016/j.corsci.2022.110102 ↗
4. Effect of temperature on corrosion of carbon steel in simulated concrete pore solution under anoxic conditions10.1016/j.corsci.2020.108886 ↗
5. Hydration evolution and compressive strength of calcium sulphoaluminate cement constantly cured over the temperature range of 0 to 80°C10.1016/j.cemconres.2017.05.025 ↗
6. Influence of temperature on phase assemblages of belite-ye'elimite cement10.1016/j.cemconres.2023.107339 ↗
7. Recent progress and technical challenges in using calcium sulfoaluminate (CSA) cement10.1016/j.cemconcomp.2022.104908 ↗
8. Expansion mechanisms in calcium aluminate and sulfoaluminate systems with calcium sulfate10.1016/j.cemconres.2013.11.011 ↗
9. electrochemical performance of steel embedded in csa concrete and its interfacial microstructure. Advances in materials science and engineering
10. Corrosion resistance of steel embedded in sulfoaluminate-based binders10.1016/j.cemconcomp.2018.01.014 ↗
11. Sulfate-Induced corrosion of carbon steel reinforcement in fresh calcium sulfoaluminate binders10.5006/3910 ↗
12. Electrochemical responses of carbon steel in ordinary portland cement blended with calcium sulfoaluminate cement10.1016/j.conbuildmat.2023.132788 ↗
13. Initiation of chloride-induced corrosion of steel in concrete: role of the interfacial zone10.1002/maco.200905278 ↗
14. The hydration phase and pore structure formation in the blends of sulfoaluminate-belite cement with portland cement10.1016/S0008-8846(02)00994-8 ↗
15. The effect of concrete pore solution composition on the quality of passive oxide films on black steel reinforcement10.1016/j.cemconcomp.2008.10.003 ↗
16. Effect of Long-Term immersion on the corrosion and passivation behavior of lean duplex stainless steel 2101 in 3.5 wt% NaCl solution10.1007/s12540-022-01342-1 ↗
17. Bipolar electrochemistry for high throughput screening of localised corrosion in stainless steel rebars10.1016/j.conbuildmat.2022.130174 ↗
18. New insights into the hardening and pitting corrosion mechanisms of thermally aged duplex stainless steel at 475 °C: a comparative study between 2205 and 2101 steels10.1016/j.jmst.2021.04.046 ↗
19. A comprehensive study of the pitting corrosion mechanism of lean duplex stainless steel grade 2404 aged at 475 °C10.1016/j.corsci.2021.109738 ↗
20. Microstructure evolution during annealing at different temperatures and hot deformation behavior of lean duplex stainless steel 2101
21. Electrochemical and passivation behavior of duplex stainless steel in simulated concrete pore solution10.20964/2017.12.21 ↗
22. Effect of temperature on the corrosion behaviour of low-nickel duplex stainless steel bars in concrete10.1016/j.cemconres.2013.11.004 ↗
23. Retardation effect of elevated temperature on the setting of calcium sulfoaluminate cement clinker10.1016/j.conbuildmat.2018.05.061 ↗
24. Early hydration of calcium sulfoaluminate cement at elevated temperatures10.1021/acssuschemeng.4c05411 ↗
25. The corrosion potential of stainless steel rebars in concrete: temperature effect10.1016/j.corsci.2012.09.001 ↗
26. Degradation of passive film on 304 stainless steel in a simulated concrete pore solution under alternating temperature condition10.1016/j.cemconcomp.2020.103651 ↗
27. The coupled effect of temperature and carbonation on the corrosion of rebars in the simulated concrete pore solutions10.1155/2015/462605 ↗
28. Role of red mud in natural passivation and chloride-induced depassivation of reinforcing steels in alkaline concrete pore solutions10.1016/j.corsci.2021.109669 ↗
29. On the intrinsic passivating ability of Belite-Ye’elimite-Ferrite towards carbon steel: a straightforward comparison with ordinary portland cement10.1016/j.corsci.2018.11.012 ↗
30. Physico-chemical interaction between mineral admixtures and OPC–calcium sulfoaluminate (CSA) cements and its influence on early-age expansion10.1016/j.cemconres.2015.11.003 ↗
31. Pore solution chemistry of calcium sulfoaluminate cement and its effects on steel passivation
32. Pore solution composition of calcium sulfoaluminate cement10.1680/adcr.1999.11.1.23 ↗
33. Hydration of calcium sulfoaluminate cements — experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗
34. Pore solution composition and alkali diffusion in inorganic polymer cement10.1016/j.cemconres.2010.04.008 ↗
35. Natural passivation and chloride corrosion resistance of inconel 625 in OPC and CSA concrete pore solutions with different ph10.1016/j.cemconcomp.2024.105794 ↗
36. Using ultrasonic wave to trigger microcapsule inhibitor against chloride-induced corrosion of carbon steel in simulated concrete pore solution10.1016/j.conbuildmat.2021.125331 ↗
37. Passivation and corrosion behavior of 2304 duplex stainless steel in alkali-activated slag materials10.1016/j.cemconcomp.2020.103532 ↗
38. Corrosion inhibition efficiency of triethanolammonium dodecylbenzene sulfonate on Q235 carbon steel in simulated concrete pore solution10.1016/j.corsci.2019.108097 ↗
39. Corrosion behaviour of coated steel rebars in carbonated and chloride-contaminated alkali-activated Fly ash mortar10.1016/j.porgcoat.2016.04.040 ↗
40. Preparation of phytic acid conversion coating and corrosion protection performances for steel in chlorinated simulated concrete pore solution10.1016/j.corsci.2018.05.018 ↗
41. Electrochemical behavior of zinc in alkali-activated Fly ash solution10.1016/j.cemconcomp.2023.105395 ↗
42. In-depth insights of inhibitory behaviour of 2-amino-4-methylthiazole towards galvanised steel in neutral NaCl solution10.1016/j.corsci.2022.110206 ↗
43. Hard acid–hard base interactions responsible for densification of alumina layer for superior electrochemical performance10.1016/j.corsci.2020.108663 ↗
44. Effect of sodium benzoate on corrosion behavior of 6061 al alloy processed by plasma electrolytic oxidation10.1016/j.surfcoat.2015.11.006 ↗
45. Effect mechanism of ultrasound on growth of micro-arc oxidation coatings on A96061 aluminum alloy10.1016/j.vacuum.2014.04.015 ↗
46. Beneficial and detrimental effects of molybdate as an inhibitor on reinforcing steels in saturated Ca(OH)2 solution: spontaneous passivation10.1016/j.cemconcomp.2020.103887 ↗
47. Chloride-induced depassivation and corrosion of mild steel in magnesium potassium phosphate cement10.1016/j.corsci.2022.110482 ↗
48. Scanning electrochemical microscopy characterization of sol-gel coatings applied on AA2024-T3 substrate for corrosion protection10.1016/j.corsci.2016.06.002 ↗
49. Characterization of the passive film formed on the reinforcement surface in alkali activated Fly ash: surface analysis and electrochemical evaluation10.1016/j.corsci.2019.108393 ↗
50. Passivation behavior of steel in novel low-carbon binders with belitic calcium sulfoaluminate cement10.1016/j.cemconcomp.2024.105686 ↗
51. Improved corrosion resistance of a new 6% cr steel in simulated concrete pore solution contaminated by chlorides10.1016/j.corsci.2020.108851 ↗
52. Role of al in zn bath on the formation of the inhibition layer during hot-dip galvanizing for a 1.2Si–1.5Mn transformation-induced plasticity steel10.1016/j.apsusc.2013.08.077 ↗
53. Optimizing the resistance of Ni-advanced weathering steel to marine atmospheric corrosion with the addition of al or mo10.1016/j.conbuildmat.2021.122341 ↗
54. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution10.1016/j.corsci.2018.02.031 ↗
55. Microstructure and corrosion behavior of FeCrNiCoMnx (x = 1.0, 0.6, 0.3, 0) high entropy alloys in 0.5 m H2SO410.1016/j.corsci.2021.109694 ↗
56. Influence of Mn-Ni alloying elements on surface film and pitting resistance of Cr-Mn austenitic stainless steels10.1016/j.conbuildmat.2016.08.059 ↗
57. Synergistic effect of red mud and Fly ash on passivation and corrosion resistance of 304 stainless steel in alkaline concrete pore solutions10.1016/j.cemconcomp.2022.104637 ↗
58. XPS depth profiling study on the passive oxide film of carbon steel in saturated calcium hydroxide solution and the effect of chloride on the film properties10.1016/j.apsusc.2010.12.120 ↗
59. Combined XPS / TEM study of the chemical composition and structure of the passive film formed on additive manufactured 17-4PH stainless steel
60. Corrosion behaviour of corrugated lean duplex stainless steels in simulated concrete pore solutions10.1016/j.corsci.2011.01.050 ↗
61. Design of high chloride-resistant passivation films: from synthesis to the mechanisms of nano-generation10.1016/j.corsci.2024.112656 ↗
62. Enhanced corrosion resistance and gas pore- induced pitting mechanisms of CoCrFeMnNi high entropy alloy fabricated by underwater directed metal deposition with feedstock modification10.1016/j.corsci.2025.112716 ↗
63. The high-temperature oxidation of bulk nanocrystalline 304 stainless steel in air10.1016/j.corsci.2013.03.008 ↗
64. Influence of bath temperature on zinc plating and passivation process10.1179/1743294412Y.0000000102 ↗
65. Effect of high temperature on the corrosion behavior and passive film composition of 316 l stainless steel in high H2S-containing environments10.1016/j.corsci.2020.108844 ↗
66. Improved corrosion resistance of 316 stainless steel in calcium sulfoaluminate cement incorporated with red mud and citrate10.1016/j.cemconcomp.2025.105940 ↗
67. Understanding the intrinsic effect of Fly ash on passivity and chloride-induced corrosion of carbon steel and stainless steel in cement extract solutions10.1016/j.cemconcomp.2023.105236 ↗
68. Passivation and corrosion behavior of P355 carbon steel in simulated concrete pore solution at ph 12.5 to 1410.20964/2017.11.51 ↗
69. Influence of ph on passivation of mild steel in simulated concrete pore solution: electrochemical
70. Hydroxyl transport mechanisms upon passivation of Cr-Fe-Co-Ni-Mo multi-principal element alloy surfaces investigated by isotopic labelling10.1016/j.apsusc.2024.159558 ↗
71. Study of the surface oxides and corrosion behaviour of an equiatomic CoCrFeMnNi high entropy alloy by XPS and ToF-SIMS10.1016/j.corsci.2020.108507 ↗
72. Effect of mn addition on microstructure and corrosion behavior of AlCoCrFeNi high-entropy alloy10.1016/j.intermet.2024.108236 ↗
73. Hydration behavior of cements with reduced clinker factor in mixture with sulfoaluminate binder10.1016/j.cemconres.2020.106261 ↗
74. Synthesis of high belite sulfoaluminate cement with high volume of mixed solid wastes10.1016/j.cemconres.2022.106845 ↗
75. The role of admixed CaO in a sulphoaluminate cement system under winter environments
76. Calcium sulfoaluminate cement and supplementary cementitious materials-containing binders in self-healing systems10.1016/j.cemconcomp.2023.105115 ↗
77. Corrosion resistance of calcium sulfoaluminate cementitious systems10.1061/JMCEE7.MTENG-15178 ↗
78. Enhanced passivation of galvanized steel bars in nano-silica modified cement mortars10.1016/j.cemconcomp.2020.103626 ↗
79. Enhanced passivity of reinforcing steel in cementitious materials with thermally-activated red mud10.1016/j.cemconcomp.2024.105696 ↗
80. Mechanisms underlying the relationship between electrical resistivity and corrosion rate of steel in mortars10.1016/j.cemconres.2022.106867 ↗