journal article·2025-04

An interesting oxidation-reduction phenomenon between the Zr(Cr,Fe)2 Laves phase and Cr2O3 under high temperature

Kejian Wei, Jiahong Wei, Guoqin Cao, Gang Cheng, Weihua Li, Junhua Hu, Sho Kano, Hiroaki Abe

Corrosion Science· Volume 246
Publisher page

Abstract

Studying Zr(Cr, Fe) 2 Laves phase oxidation is vital for deepening our understanding of the oxidation mechanism of accident tolerant fuel (ATF) Cr-coated Zr and Zr-based alloys. Here, an interesting oxidation phenomenon of Zr(Cr, Fe) 2 Laves phase was confirmed for the first time. Meanwhile, this oxidation was accompanied by the Cr 2O 3 reduction. The lattice oxygen was transferred from Cr 2O 3 to Zr(Cr, Fe) 2 Laves phases, and Cr 2O 3 was transformed into Cr while Zr(Cr, Fe) 2 was oxidized into m-ZrO 2, Cr and Fe. The reaction Gibbs Free energy (△ r G m Θ ) value is around −980 kJ/mol without considering Fe, which verifies the feasibility of this interesting oxidation-reduction phenomenon.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Thermal and Kinetic Analysis · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Discerning the effect of various irradiation modes on the corrosion of Zircaloy-410.1016/j.jnucmat.2024.155505 ↗
2. Effect of a pre-oxide on the high temperature steam oxidation of Zircaloy-4 and M5Framatome Alloys10.1016/j.jnucmat.2019.03.023 ↗
3. APT and TEM study of behaviour of alloying elements in neutron-irradiated zirconium-based alloys10.1016/j.scriptamat.2021.114323 ↗
4. Quenching behavior of high temperature Cr-coated Zr-alloy cladding during bottom reflood condition10.1016/j.ijheatmasstransfer.2024.125942 ↗
5. Enhanced flow boiling heat transfer on chromium coated zircaloy-4 using cold spray technique for accident tolerant fuel (ATF) materials10.1016/j.applthermaleng.2020.116347 ↗
6. High-temperature oxidation and quenching of chromium-coated zirconium alloy ATF cladding tubes with and w/o pre-damage10.1016/j.jnucmat.2021.153470 ↗
7. Nested loops explain low irradiation-induced swelling rate10.1016/j.actamat.2024.119700 ↗
8. Effects of Al and Si elements on oxidation behavior in 1000-1200 °C steam for PEO/CrAlSi composite coating on Zr alloy10.1016/j.surfcoat.2024.130705 ↗
9. Accident tolerant fuel cladding development: promise, status, and challenges10.1016/j.jnucmat.2017.12.043 ↗
10. Review on chromium coated zirconium alloy accident tolerant fuel cladding10.1016/j.jallcom.2021.162450 ↗
11. Corrosion behavior of Cr-coated zirconium alloy cladding in LiOH/H3BO3-containing water at 360℃10.1016/j.corsci.2023.111386 ↗
12. Effect of PEO interlayer on oxidation behavior of PEO/Cr composite coating on Zr-1Nb alloy in 1200 °C steam10.1016/j.corsci.2023.111676 ↗
13. Improved oxidation resistance of Cr/FeCrAl coating on Zr alloy in high-temperature steam environment10.1016/j.surfcoat.2023.129992 ↗
14. Systematic investigations on the oxidation mechanism of Cr coated Zr-4 alloy under different high-temperature steam conditions10.1016/j.ceramint.2024.02.185 ↗
15. An interesting oxidation phenomenon of Cr coatings on Zry-4 substrates in high temperature steam environment10.1016/j.corsci.2019.05.017 ↗
16. Evolution of Cr/Cr2O3 interface in Cr-coated zirconium alloy in high temperature steam10.1016/j.corsci.2023.111099 ↗
17. A systematic study of the oxidation behavior of Cr coatings on Zry4 substrates in high temperature steam environment10.1016/j.corsci.2020.108826 ↗
18. Direct experimental evidence of the reduction of Cr2O3 by Zr at high temperature10.1016/j.corsci.2023.111587 ↗
19. Evolution of Cr/Cr2O3 interface in Cr-coated zirconium alloy in high temperature steam10.1016/j.corsci.2023.111099 ↗
20. Microstructural evolution of pre-oxidized Cr-coated Zry-4 during annealing in argon10.1016/j.jnucmat.2022.154144 ↗
21. Experimental kinetic study of interdiffusion behavior and intermetallic compound Zr (Fe, Cr) 2 formation at the Cr/Zry4 interface under elevated temperatures10.1016/j.jnucmat.2023.154595 ↗
22. Growth kinetics and microstructure characteristics of the Zr-Cr interlayer in a Cr-coated Zry-4 alloy exposed to high-temperature steam10.1016/j.corsci.2023.111600 ↗
23. Model development for oxidation and degradation behavior of accident tolerant Cr coating on Zr alloy cladding under high temperature steam atmosphere10.1016/j.jnucmat.2023.154836 ↗
24. The corrosion of Zr(Fe,Cr)2 and Zr2Fe secondary phase particles in Zircaloy-4 under 350C pressurised water conditions10.1016/j.corsci.2017.09.014 ↗
25. Precipitate evolution in the Zircaloy-4 oxide layer10.1016/0022-3115(92)90385-X ↗
26. Redistribution of the alloying elements during Zircaloy-2 oxidation10.1016/S0022-3115(97)00191-8 ↗
27. On the oxidation behavior of (Zr, Nb)2Fe under simulated nuclear reactor conditions10.1016/j.corsci.2016.08.006 ↗
28. Self-toughening mechanism of the ZrO2 scale and the precipitation of Sn during the steam oxidation of ZIRLO™ at 1200℃10.1016/j.actamat.2023.119114 ↗
29. Oxidation behaviour of zirconium alloys and their precipitates–A mechanistic study10.1016/j.jnucmat.2012.06.026 ↗
30. Oxidation of β-Nb and Zr (Fe,V)2 precipitates in oxide films formed on advanced Zr-based alloys10.1016/S0022-3115(99)00253-6 ↗
31. Chemical diversity of iron species and structure evolution during the oxidation of C14 Laves phase Zr(Fe,Nb)2 in subcritical environment10.1016/j.corsci.2019.108218 ↗
32. Oxidation of the hexagonal Zr (Cr0.4Fe0.6)2 Laves phase10.1016/j.jnucmat.2004.04.335 ↗
33. Modification of the high fluence irradiation facility at the University of Tokyo: assessment of radiation-induced amorphization of Zr (Cr,Fe)2 Laves phase under 180 keV-He+ irradiation10.1016/j.nimb.2022.09.017 ↗
34. The formation and stacking faults of Fe and Cr containing Laves phase in Zircaloy-4 alloy10.1016/j.matlet.2016.12.062 ↗
35. Nano-refinement of the face-centered cubic Zr (Fe,Cr)2 secondary phase particles in Zircaloy-4 alloy via localized-shearing/bending-driven fracture under high-temperature compression10.1016/j.jmst.2023.04.063 ↗
36. High temperature steam oxidation of chromium-coated zirconium based alloys: kinetics and process10.1016/j.corsci.2020.108537 ↗
37. Development of cold spray coatings for accident-tolerant fuel cladding in light water reactors10.1007/s11837-017-2643-9 ↗
38. Speight · 1999
39. Oxidation behavior of Cr-coated zirconium alloy cladding in high-temperature steam above 1200 ℃10.1038/s41529-021-00155-8 ↗
40. TEM characterizations of a ZrO2/Cr composite coating on Zr-1Nb alloy after 1200 ℃ steam oxidation10.1016/j.matchar.2023.112701 ↗
41. Thermal decomposition behavior of ZrO2 barrier layer against Cr/Zr inter-diffusion under high temperature10.1016/j.corsci.2024.112390 ↗
42. Study on the corrosion mechanism of Zr-1Sn-xFe-0.2 Cr-0.02 Ni alloy in 500 ℃ super-heated steam with oxygen10.1016/j.corsci.2024.112121 ↗