Coordination of azole-type corrosion inhibitors with copper ions: A DFT study
Source abstract
Abstract
The thermodynamics of formation of soluble coordination complexes between hydrated Cu(I)/Cu(II) ions and 19 N-heterocyclic molecules was investigated using molecular modeling based on density-functional theory and a cluster/continuum solvation model. Under the premise that adsorption of inhibitors promotes corrosion inhibition, the formation of stable soluble complexes between organic ligands and metal cations should be detrimental. The calculations revealed that the majority of the considered molecules can form stable soluble coordination complexes with copper ions, although their tendency to do so is substantially lower than that of Cl − ions. While no direct correlation was observed between the formation Gibbs energies of coordination complexes and the experimentally determined corrosion inhibition efficiencies, the results based on the Cu(II) data can nonetheless be grouped into three categories: (i) the compound is likely to act as a corrosion inhibitor if complex formation is endergonic or only weakly exergonic; (ii) for corrosion activators, complex formation is significantly exergonic; and (iii) even if complex formation is appreciably exergonic, the compound may still act as a corrosion inhibitor.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Inorganic and Organometallic Chemistry · Crystallography and molecular interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Organic compounds as corrosion inhibitors in different environments—A review10.1016/0033-0655(81)80009-X ↗
2. Bockris · 2000
3. Corrosion inhibitors: physisorbed or chemisorbed?10.1016/j.corsci.2021.109939 ↗
4. Molecular modeling of organic corrosion inhibitors: Calculations, pitfalls, and conceptualization of molecule–surface bonding10.1016/j.corsci.2021.109650 ↗
5. Molecular modeling applied to corrosion inhibition: a critical review
6. Impact of inhibition mechanisms, automation, and computational models on the discovery of organic corrosion inhibitors10.1016/j.pmatsci.2024.101392 ↗
7. The roles of mercapto, benzene, and methyl groups in the corrosion inhibition of imidazoles on copper: II. Inhibitor–copper bonding10.1016/j.corsci.2015.05.041 ↗
8. Rational design of effective Mg degradation modulators10.5006/3597 ↗
9. Dlouhy · 2023
10. Synthesis, characterization and corrosion inhibition property of nickel(II) and copper(II) complexes with some acylhydrazine Schiff bases10.1016/j.poly.2015.01.003 ↗
11. A DFT prediction on the chemical reactivity of novel azolethione derivatives as chelating agents: Implications for copper minerals flotation and copper corrosion inhibition10.1016/j.jtice.2018.09.022 ↗
12. Mitigation effect of novel bipyrazole ligand and its copper complex on the corrosion behavior of steel in HCl: Combined experimental and computational studies10.1016/j.cplett.2022.139532 ↗
13. Computational, Monte Carlo simulation and experimental studies of some arylazotriazoles (AATR) and their copper complexes in corrosion inhibition process10.1016/j.molliq.2018.01.055 ↗
14. Theoretical MD/DFT computer explorations and surface-electrochemical investigations of the zinc/iron metal cations interactions with highly active molecules from lemon balm extract toward the steel corrosion retardation in saline solution10.1016/j.molliq.2020.113220 ↗
15. Experimental studies on corrosion inhibition performance of acetylthiophene thiosemicarbazone for mild steel in HCl complemented with DFT investigation10.1093/ijlct/ctaa050 ↗
16. Progress on the coordination chemistry and application of hydantoins and its derivatives as anticorrosive materials for steel: A review10.1016/j.ccr.2023.215207 ↗
17. Data science based Mg corrosion engineering10.3389/fmats.2019.00053 ↗
18. Adsorption mechanism and synergistic corrosion-inhibiting effect between the green nettle leaves extract and Zn2+ cations on carbon steel10.1016/j.jiec.2019.04.056 ↗
19. Simplistic correlations between molecular electronic properties and inhibition efficiencies: Do they really exist?10.1016/j.corsci.2020.108856 ↗
20. MN15: a Kohn–Sham global-hybrid exchange–correlation density functional with broad accuracy for multi-reference and single-reference systems and noncovalent interactions10.1039/C6SC00705H ↗
21. Frisch · 2016
22. Balanced basis sets of split valence, triple zeta valence and quadruple zeta valence quality for H to Rn: Design and assessment of accuracy10.1039/b508541a ↗
23. Universal solvation model based on solute electron density and on a continuum model of the solvent defined by the bulk dielectric constant and atomic surface tensions10.1021/jp810292n ↗
24. GoodVibes: automated thermochemistry for heterogeneous computational chemistry data10.12688/f1000research.22758.1 ↗
25. Use of solution-phase vibrational frequencies in continuum models for the free energy of solvation10.1021/jp205508z ↗
26. XCrySDen–a new program for displaying crystalline structures and electron densities10.1016/S1093-3263(99)00028-5 ↗
27. Williams · 2023
28. Kosata · 2011
29. Ink. Proj. · 2023
30. Estimation of pKa for organic oxyacids using calculated atomic charges10.1002/jcc.540141208 ↗
31. ChemAxon · 2023
32. Calculation of solvation free energies of charged solutes using mixed cluster/continuum models10.1021/jp802665d ↗
33. Computational study of copper(II) complexation and hydrolysis in aqueous solutions using mixed cluster/continuum models10.1021/jp904816d ↗
34. Electrochemistry of high concentration copper chloride complexes10.1021/ac4016769 ↗
35. Infrared photodissociation spectra and solvation structures of Cu+(H2O)n (n=1–4)10.1016/j.cplett.2006.06.036 ↗
36. Theoretical model of copper Cu(I)/Cu(II) hydration. DFT and ab initio quantum chemical study10.1016/j.theochem.2004.06.013 ↗
37. Structures and binding enthalpies of M+(H2O)n clusters, M=Cu, Ag, Au10.1063/1.477814 ↗
38. Molecular modeling of organic corrosion inhibitors: Why bare metal cations are not appropriate models of oxidized metal surfaces and solvated metal cations
39. Aqueous solvation free energies of ions and ion–water clusters based on an accurate value for the absolute aqueous solvation free energy of the proton10.1021/jp063552y ↗
40. Thermodynamics of solvation of ions. Part 5.—Gibbs free energy of hydration at 298.15 k10.1039/FT9918702995 ↗
41. Hydration of copper(II): New insights from density functional theory and the COSMO solvation model10.1021/jp804373p ↗
42. Ambiguities in solvation free energies from cluster-continuum quasichemical theory: lithium cation in protic and aprotic solvents10.1039/D1CP01454D ↗
43. The proton’s absolute aqueous enthalpy and Gibbs free energy of solvation from cluster-ion solvation data10.1021/jp982638r ↗
44. Cluster-continuum calculations of hydration free energies of anions and group 12 divalent cations10.1021/ct300296k ↗
45. Solvent effects on the structures of the hydrated copper dication clusters10.1016/j.molliq.2024.125693 ↗
46. Structure and dynamics of hydrated ions10.1021/cr00019a014 ↗
47. Coordination of copper(II). Evidence of the Jahn-Teller effect in aqueous perchlorate solutions10.1021/ic00134a053 ↗
48. Kinetics and mechanisms of Cu electrodissolution in chloride media10.1149/1.2108335 ↗
49. Electrochemical behaviour of copper in neutral aerated chloride solution. I. Steady-state investigation10.1007/BF01093751 ↗
50. Chloride complexes of copper(I) chloride in aqueous solution10.1021/j100455a006 ↗
51. A calorimetric study of copper(II) chloride complexes in aqueous solution10.3891/acta.chem.scand.36a-0015 ↗
52. Stability and electronic spectra of the copper(II) chloro complexes in aqueous solutions10.1021/ic50163a041 ↗
53. Electrochemical corrosion of unalloyed copper in chloride media––a critical review10.1016/S0010-938X(02)00257-3 ↗
54. Localized corrosion (pitting): A model of passivity breakdown including the role of the oxide layer nanostructure10.1016/j.corsci.2008.06.047 ↗
55. Roles of chloride ions in the formation of corrosion protective films on copper10.1149/1945-7111/abe34a ↗
56. Calculations of the intrinsic constants of the complexation between Cu(II) and halide ions in solution10.1134/S1070328408010065 ↗
57. The roles of mercapto, benzene and methyl groups in the corrosion inhibition of imidazoles on copper: I. Experimental characterization10.1016/j.corsci.2015.05.006 ↗
58. How relevant are molecular electronic parameters for predicting corrosion inhibition efficiency: imidazoles as corrosion inhibitors of Cu/Zr materials in NaCl solution10.1016/j.corsci.2021.109900 ↗
59. Synergistic effect of SH-BimH and octylphosphonic acid as corrosion inhibitors for copper and aluminium – An electrochemical, XPS, FTIR and DFT study10.1016/j.corsci.2020.109082 ↗
60. Study of mercaptobenzimidazoles as inhibitors for copper corrosion: Down to the molecular scale10.1149/1945-7111/abf9c3 ↗
61. DFT studies of 2-mercaptobenzothiazole and 2-mercaptobenzimidazole as corrosion inhibitors for copper10.1016/j.corsci.2020.108840 ↗
62. Adsorption of 2-mercaptobenzimidazole corrosion inhibitor on copper: DFT study on model oxidized interfaces10.1149/1945-7111/abcd4f ↗
63. Atomic scale insight into corrosion inhibition: DFT study of 2-mercaptobenzimidazole on locally de-passivated copper surfaces10.1149/1945-7111/ac405c ↗
64. The effect of molecular structure of imidazole-based compounds on corrosion inhibition of Cu
65. Imidazole- and mercaptobenzimidazole-derivatives as corrosion inhibitors for Cu, Cu–Zn alloys, and Zn in chloride solution10.1016/j.electacta.2025.146460 ↗