Effect of hydrogen on oxidation of Fe-20Cr-(1Si, 2Mn or 2Al) alloys in water vapour at 650 °C
Source abstract
Abstract
Hydrogen production and utilisation involve H 2 O(g) at high temperatures. However, the effect of hydrogen on chromia-forming heat resistant alloys in H 2 O is still unclear. In this work, Fe-20Cr and Fe-20Cr-(1Si, 2Mn or 2Al) (wt%) were exposed in Ar-xH 2 -10H 2 O gases (x = 2, 10 and 20 vol%) at 650°C for up to 310 h. The binary alloy experienced breakaway oxidation in all gases. Increasing hydrogen content reduced corrosion rates and altered oxide morphologies. Adding Mn, Al or Si to the alloy suppressed oxidation to some extent. The effects of both hydrogen and alloying on the diffusion processes supporting oxidation are discussed. • Increasing H 2 concentration reduced oxidation rate and altered oxide morphology. • High concentration of H 2 in reaction gas led to the embrittlement of outer iron oxide. • The presence of H 2 enhanced oxygen permeability, forming a thicker IOZ. • Si, Al or Mn additions improved the oxidation resistance of Fe-20Cr in water vapour.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Thermal and Kinetic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Electrochemical modeling of hydrogen production by proton-conducting solid oxide steam electrolyzer10.1016/j.ijhydene.2008.05.065 ↗
2. The effect of water vapor on selective oxidation of Fe–Cr alloys10.1007/s11085-007-9090-x ↗
3. High-temperature oxidation of Fe-Cr alloys in wet oxygen10.1007/BF01670507 ↗
4. Effect of water vapor and oxygen partial pressure on oxidation of Fe and Fe–Cr alloys10.1007/s11085-022-10140-4 ↗
5. Effects of H2 on microstructures of Cr2O3 scales grown in water vapour and consequences for breakaway10.1016/j.corsci.2024.112265 ↗
6. The effect of H2 and H2O on the oxidation of 304L-stainless steel at 600 °C: general behaviour (Part I)10.1007/s11085-015-9597-5 ↗
7. Effects of cerium and manganese on corrosion of Fe–Cr and Fe–Cr–Ni alloys in Ar–20CO2 and Ar–20CO2–20H2O gases at 650°C10.1016/j.corsci.2015.08.012 ↗
8. Effects of silicon on high temperature corrosion of Fe–Cr and Fe–Cr–Ni alloys in carbon dioxide10.1007/s11085-013-9467-y ↗
9. Hydrogen embrittlement, grain boundary segregation, and stress corrosion cracking of alloy X-750 in low-and high-temperature water10.1007/s11661-999-0095-8 ↗
10. Darken · 1953
11. Isothermal transformation behavior of thermally-grown wüstite10.1179/mht.2000.17.2.020 ↗
12. Observation of hydrogen trapping at dislocations, grain boundaries, and precipitates10.1126/science.aaz0122 ↗
13. Zur Auswertung von Messungen der Schichtdicken binärer Legierungen mit innerer Oxydation bei gleichzeitiger äußerer Oxydation10.1515/ijmr-1961-520809 ↗
14. Reaktionstypen bei der Oxydation von Legierungen
15. Diffusion of chromium in α-iron10.1002/pssa.2210900219 ↗
16. Chapter 2 - enabling theory
17. Solubility, permeability, and diffusivity of oxygen in solid iron
18. Determination of diffusion coefficient of oxygen in α-iron from internal oxidation measurements in Fe-Si alloys10.1007/BF00547959 ↗
19. Enhanced diffusion of oxygen during internal oxidation of nickel-base alloys10.1080/01418618208236942 ↗
20. Internal oxidation10.1179/mst.1988.4.12.1072 ↗
21. Oxidation of metals by short circuit and lattice diffusion of oxygen10.1016/0001-6160(61)90192-4 ↗
22. On the role of dislocations in bulk diffusion10.1016/0001-6160(57)90127-X ↗
23. The effect of water vapor on NiO formation by Ni–Cr alloys at 650 °C (HTCPM Focus Issue, FNS-111)10.1007/s11085-021-10047-6 ↗
24. Water vapour effects on corrosion of Ni-Cr alloys in CO2 gas at 650 °C10.1016/j.corsci.2018.03.023 ↗
25. Beitrag zur Theorie des Anlaufvorgangs10.1515/zpch-1933-2105 ↗
26. The transition from internal to external oxidation and the formation of interruption bands in silver-indium alloys10.1016/0001-6160(61)90103-1 ↗
27. Effects of silicon and water vapour on corrosion of Fe–20Cr and Fe–20Cr–20Ni alloys in CO2 at 650°C10.1007/s11085-016-9681-5 ↗
28. The effect of Cr on the lifetime of Al-rich amorphous oxide layer formed on Fe–Cr–Al alloys at 650 °C10.1007/s11085-017-9761-1 ↗
29. Y. Cai, Effects of Chloride Deposit and Coal Ash on High-Temperature Corrosion of Chromia-Forming Alloys, Doctoral dissertation, UNSW, Sydney, 2023.
30. Corrosion behaviour of Ni-Cr alloys in mixed oxidising gases at 650°C10.1016/j.corsci.2020.108801 ↗