Bridging static corrosion behavior and stress corrosion cracking susceptibility in dilute Mg-Zn-Ca alloys
Source abstract
Abstract
The relationship between corrosion behavior and stress corrosion cracking (SCC) is bridged in ZX10-xSn (0 ≤ x ≤ 2) alloys. Specifically, severe localized corrosion serves as a crack initiation source and causes film rupture and hydrogen accumulation, resulting in high susceptibility index of SCC ( I SCC ). Among the five alloys, ZX10–1.5Sn boasts the lowest I SCC , with an I εf of ∼2 % for pre-immersed samples and ∼63 % for immersed samples, owning to its uniform corrosion . This significant difference in I εf suggests that enhanced hydrogen penetration due to external forces, rather than the corrosion products , plays a more critical role in deteriorating mechanical properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (82)
Show source-provided references
1. Bioactive, antibacterial, and biocompatible multifunctional mg–go/zno nanocomposite with improved mechanical and corrosion characteristics10.1002/adem.202400414 ↗
2. Magnesium research and applications: past, present and future10.1016/j.jma.2023.11.007 ↗
3. Towards the development of heat-treatable high-strength wrought Mg alloys10.1016/j.scriptamat.2010.01.038 ↗
4. Annealing strengthening in a dilute Mg–Zn–Ca sheet alloy10.1016/j.scriptamat.2015.06.002 ↗
5. A heat-treatable Mg–Al–Ca–Mn–Zn sheet alloy with good room temperature formability10.1016/j.scriptamat.2017.05.034 ↗
6. A high-ductility Mg–Zn–Ca magnesium alloy10.1007/s40195-018-0804-7 ↗
7. The role of zinc in the biocorrosion behavior of resorbable Mg-Zn-Ca alloys10.1016/j.actbio.2019.09.021 ↗
8. Influence of Ca and Zn on the microstructure and corrosion of biodegradable Mg–Ca–Zn alloys10.1016/j.corsci.2015.01.027 ↗
9. Relationship between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys10.1016/j.corsci.2012.07.015 ↗
10. A critical review of the stress corrosion cracking (SCC) of magnesium alloys10.1002/adem.200500071 ↗
11. Materials for extreme environments10.1038/s41578-022-00496-z ↗
12. Recent advances on the development of magnesium alloys for biodegradable implants10.1016/j.actbio.2014.07.005 ↗
13. Corrosion behavior and mechanism of dual phase Fe1.125Ni1.06CrAl high entropy alloy10.1016/j.corsci.2022.110276 ↗
14. Stress corrosion cracking of magnesium alloys: a review
15. Effect of plasma electrolytic oxidation treatment on the corrosion and stress corrosion cracking behaviour of AM50 magnesium alloy10.1016/j.msea.2008.04.031 ↗
16. General treatment of the thermogravimetry of polymers10.6028/jres.070A.043 ↗
17. Damage due to hydrogen embrittlement and stress corrosion cracking10.1016/S1350-6307(99)00033-3 ↗
18. States and transport of hydrogen in the corrosion process of an AZ91 magnesium alloy in aqueous solution10.1016/j.corsci.2008.01.028 ↗
19. AC impedance spectroscopy study of the corrosion behavior of an AZ91 magnesium alloy in 0.1M sodium sulfate solution10.1016/j.electacta.2006.10.007 ↗
20. Effect of magnesium hydride on the corrosion behavior of an AZ91 magnesium alloy in sodium chloride solution10.1016/j.corsci.2008.09.013 ↗
21. Hydrogen embrittlement of magnesium and magnesium alloys: a review10.1149/2.023304jes ↗
22. Stress corrosion cracking behavior of ZK60 magnesium alloy under different conditions10.1016/j.ijhydene.2017.08.161 ↗
23. Evaluation of the delayed hydride cracking mechanism for transgranular stress corrosion cracking of magnesium alloys10.1016/j.msea.2007.03.020 ↗
24. Effect of hydrogen on stress corrosion cracking of magnesium alloy in 0.1M Na2SO4 solution10.1016/j.msea.2007.11.035 ↗
25. Thermodynamics and kinetics of phase transformation in rare earth–magnesium alloys: a critical review10.1016/j.jmst.2020.01.022 ↗
26. On the role of pre-exposure time and corrosion products in stress-corrosion cracking of ZK60 and AZ31 magnesium alloys10.1016/j.msea.2021.140876 ↗
27. Stress corrosion behavior of AM50Gd magnesium alloy in different environments10.3390/met9050616 ↗
28. Effect of Gd on microstructure and stress corrosion cracking of the AZ91-extruded magnesium alloy10.1002/maco.202112294 ↗
29. Grain character influences on corrosion of ECAPed pure magnesium10.1179/147842209X12559428167805 ↗
30. Comparison of the linearly increasing stress test and the constant extension rate test in the evaluation of transgranular stress corrosion cracking of magnesium10.1016/j.msea.2007.03.021 ↗
31. Suppressed hydrogen embrittlement of high-strength Al alloys by Mn-rich intermetallic compound particles10.1016/j.actamat.2022.118110 ↗
32. Stress corrosion cracking of biodegradable Mg-4Zn alloy in simulated body fluid at different strain rates – a fractographic investigation10.1016/j.msea.2018.06.002 ↗
33. Effect of strain rate and corrosion products on pre-exposure stress corrosion cracking in the ZK60 magnesium alloy10.1016/j.msea.2021.142304 ↗
34. Influence of strain rates on stress corrosion resistance of Al-Zn-Mg alloy10.12677/MS.2021.114039 ↗
35. Effect of heat treatment on the stress corrosion cracking behavior of cast Mg-3Nd-3Gd-0.2Zn-0.5Zr alloy in a 3.5 wt% NaCl salt spray environment10.1016/j.matchar.2021.111630 ↗
36. Effect of Zn addition on the stress corrosion cracking of as-cast BCC Mg-11Li based alloys10.1016/j.corsci.2023.111707 ↗
37. Influence of a MAO + PLGA coating on biocorrosion and stress corrosion cracking behavior of a magnesium alloy in a physiological environment10.1016/j.corsci.2018.12.005 ↗
38. Improving the inflammatory-associated corrosion behavior of magnesium alloys by Mn3O4 incorporated plasma electrolytic oxidation coatings10.1016/j.cej.2024.149016 ↗
39. Tuning biomechanical behavior and biocompatibility of Mg–Zn–Ca alloys by Mn3O4 incorporated plasma electrolytic oxidation coatings10.1016/j.ceramint.2024.05.267 ↗
40. Mechanism study on improving the corrosion resistance of screw rolled Mg–Zn–Ca alloy by nano-MgO addition10.1016/j.jmrt.2024.07.056 ↗
41. Negatively correlated corrosion and stress corrosion cracking of Mg-Al-Mn-Ca based alloys10.1016/j.corsci.2023.111747 ↗
42. Inhibiting stress corrosion cracking by removing corrosion products from the Mg-Zn-Zr alloy pre-exposed to corrosion solutions10.1016/j.actamat.2020.116570 ↗
43. Corrosion product film-induced stress facilitates stress corrosion cracking
44. Evidence for the presence of corrosive solution within corrosion products film in magnesium alloy ZK6010.22226/2410-3535-2022-1-76-80 ↗
45. Influence of aluminium enrichment in the near-surface region of commercial twin-roll cast AZ31 alloys on their corrosion behaviour10.1016/j.corsci.2017.04.027 ↗
46. High corrosion resistance and weak corrosion anisotropy of icosahedral phase reinforced Mg-8Li-6Zn-1Y alloy via cross-rolling10.1016/j.corsci.2024.112666 ↗
47. Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation10.1016/j.corsci.2009.10.016 ↗
48. Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE4110.1016/j.corsci.2008.08.023 ↗
49. Stress corrosion cracking susceptibility of Al–Mg alloy sheet with high Mg content10.1016/S0924-0136(02)00398-9 ↗
50. Crystallography Open Database – an open-access collection of crystal structures10.1107/S0021889809016690 ↗
51. Large hardening response mediated by room-temperature dynamic solute clustering behavior in a dilute Mg-Zn-Ca-Sn-Mn alloy10.1016/j.actamat.2022.118308 ↗
52. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
53. Effects of calcium on texture and mechanical properties of hot-extruded Mg–Zn–Ca alloys10.1016/j.msea.2012.01.030 ↗
54. High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy10.1080/21663831.2022.2133976 ↗
55. Balancing the strength and ductility of Mg-6Zn-0.2Ca alloy via sub-rapid solidification combined with hard-plate rolling10.1016/j.jmst.2020.11.069 ↗
56. Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling10.1016/j.jmst.2021.01.050 ↗
57. The stress corrosion cracking behavior of N80 carbon steel under a crevice in an acidic solution containing different concentrations of NaCl10.1016/j.corsci.2023.111068 ↗
58. Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–X alloys: X=Mn, Sn, Ca, Zn, Al, Zr, Si, Sr10.1016/j.corsci.2013.06.030 ↗
59. Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution10.1016/j.corsci.2009.10.004 ↗
60. Modification of surface hardness, wear resistance and corrosion resistance of cold spray Al coated AZ31B Mg alloy using cold spray double layered Ta/Ti coating in 3.5 wt% NaCl solution10.1016/j.corsci.2020.109029 ↗
61. Insights into corrosion behavior of Mg alloys containing long-period stacking ordered structure in chloride and sulfate media10.1016/j.corsci.2024.112592 ↗
62. Effect of heat treatment on the stress corrosion cracking behavior of cast Mg-3Nd-3Gd-0.2Zn-0.5Zr alloy in a 3.5 wt% NaCl salt spray environment10.1016/j.matchar.2021.111630 ↗
63. Formulation of corrosion rate of magnesium alloys using microstructural parameters10.1016/j.jma.2019.12.001 ↗
64. Quasi-cleavage hydrogen-assisted cracking path investigation by fractographic and side surface observations10.1016/j.engfracmech.2019.04.042 ↗
65. Influence of sample geometry and microstructure on the hydrogen induced cracking characteristics under uniaxial load10.1016/j.msea.2017.02.094 ↗
66. Hydrogen embrittlement understood10.1007/s11661-015-2836-1 ↗
67. A mechanistic theory of hydrogen embrittlement of steels10.1002/bbpc.19720760864 ↗
68. R.P. Gangloff, B.P. Somerday, Gaseous Hydrogen Embrittlement of High Performance Metals in Energy Systems, (n.d.).
69. Degradation research of protective coating on AZ91D Mg alloy components via simulated contamination
70. Electrolytic MgO/ZrO2 duplex-layer coating on AZ91D magnesium alloy for corrosion resistance10.1016/j.corsci.2013.06.037 ↗
71. Development of highly corrosion-resistant Mg-Al-Y extruded alloy via regulating the Mg17Al12 phase
72. Effect of Sn addition on the microstructure and corrosion behavior of dilute wrought Mg-Zn-Ca series alloys10.1016/j.corsci.2024.112180 ↗
73. Quantitative study of the corrosion evolution and stress corrosion cracking of high strength aluminum alloys in solution and thin electrolyte layer containing Cl10.1016/j.corsci.2020.109076 ↗
74. Y.H. Lu, Z.R. Chen, X.F. Zhu, T. Shoji, doi:10.1016/j.actbio.2014.07.005, Materials Science and Technology 30 (2014) 1944–1950. 〈https://doi.org/10.1179/1743284714Y.0000000585〉.10.1179/1743284714Y.0000000585 ↗
75. SCC life estimation based on cracks initiated from the corrosion pits of bolting material SCM435 used in steam turbine10.1299/jsmeb.47.316 ↗
76. Corrosion induced explosion of a high-pressure fire-extinguishing gas cylinder10.1007/s11668-014-9851-1 ↗
77. Peridynamic investigation of stress corrosion cracking in carbon steel pipes10.1016/j.engfracmech.2019.106604 ↗
78. Novel images of the evolution of stress corrosion cracks from corrosion pits10.1016/j.corsci.2011.05.050 ↗
79. A comparative study of localized corrosion and stress corrosion cracking of 13Cr martensitic stainless steel using acoustic emission and X-ray computed tomography10.3390/ma12162569 ↗
80. Stress corrosion cracking behavior of friction stir welded 5052-H112 Al–Mg alloy10.1016/j.vacuum.2020.109299 ↗
81. The localized corrosion and stress corrosion cracking of a 6005A-T6 extrusion profile10.3390/ma14174924 ↗
82. Pitting-induced hydrogen embrittlement of magnesium–aluminium alloy10.1016/j.matdes.2012.06.007 ↗