Formation of heterogeneous microstructure and its effect on corrosion properties of high-silicon stainless steel S38815 weldment
Source abstract
Abstract
This study aims to clarify the formation of heterogeneous microstructure and its effect on corrosion properties of high-silicon stainless steel (high-Si SS) S38815 weldment. A series of tests about microstructure and electrochemical characteristics were performed, including the electron backscatter diffraction (EBSD) analysis, Mott-Schottky tests, electrochemical impedance spectroscopy (EIS) tests, potentiodynamic and potentiostatic polarization tests. The formation mechanism of heterogeneous microstructure related to high-silicon and its correlation on corrosion was discussed extensively. The results show that the significantly deformed and recrystallised grains were observed at the low temperature heat affected zone (LT-HAZ) and high temperature heat affected zone (HT-HAZ) respectively. The metastable pitting and low impedance values were formed in the above region, despite their low donor density. The deterioration in corrosion resistance of S38815 weldment as a result of high-angle grain boundaries (HAGBs) and carbides is more pronounced than the beneficial impact of Cr and Si oxidation. This study provides valuable references to the manufacturing and enhancing the anti-corrosion properties of this high-Si SS.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Corrosion of iron and nickel based alloys in sulphuric acid: challenges and prevention strategies10.1016/j.jmrt.2023.08.198 ↗
2. A microstructural study of the oxide scale formation on ODS Fe–13Cr steel10.1016/S0022-3115(00)00248-8 ↗
3. Influence of incorporated Mo and Nb on the Mott–Schottky behaviour of anodic films formed on AISI 304L10.1016/j.corsci.2010.04.021 ↗
4. Electrochemical corrosion behavior of 2205 duplex stainless steel welds in chloride solutions10.20964/2019.02.54 ↗
5. Effect of prolonged thermal cycles on the pitting corrosion resistance of a newly developed LDX 2404 lean duplex stainless steel10.1016/j.corsci.2015.11.018 ↗
6. Effect of ferrite and grain boundary characteristics on corrosion properties of thermal simulated 316 L heat affected zone10.1016/j.corsci.2023.111384 ↗
7. Evaluation of microstructural and mechanical properties of Fe-16Cr-1Ni-9Mn-0.12N austenitic stainless steel welded join10.1016/j.matchar.2017.07.028 ↗
8. Influence of nominal composition variation on phase evolution and creep life of type 316h austenitic stainless steel components
9. G phase and ferrite in a high Si austenitic stainless steel during 510 °C aging10.1016/j.matchar.2023.113587 ↗
10. Mechanism of δ-ferrite decomposition in high Si-bearing austenitic stainless steel weld metal during aging at 550℃10.1016/j.msea.2023.145163 ↗
11. Residual stress impact on corrosion behaviour of hot and cold worked 2205 duplex stainless steel: a study by X-ray diffraction analysis10.1016/j.engfailanal.2021.105913 ↗
12. The effect of deformation on metastable pitting of 304 stainless steel in chloride contaminated concrete pore solution10.1016/j.corsci.2015.11.022 ↗
13. Influence of cold working on the pitting corrosion resistance of stainless steels10.1016/j.corsci.2006.08.021 ↗
14. The effects of heat treatment temperature on the precipitation behavior of χ phase and impact toughness in a UNS S38815 stainless steel10.1016/j.matchar.2022.112218 ↗
15. Residual stress and microstructure control in welding of SA508 low alloy steel10.1016/j.ijpvp.2023.105090 ↗
16. Effect of cold deformation on the corrosion behaviour of UNS S31803 duplex stainless steel in simulated concrete pore solution10.1016/j.corsci.2017.05.021 ↗
17. Microstructure Formation and Its Effect on Mechanical Properties for Duplex Stainless Steel 2205 Plasma Arc Welded Joint10.3390/met14010068 ↗
18. Enhancing mechanical properties and creep performance of 304H and inconel 617 superalloy dissimilar welds for Advanced Ultra Super Critical power plants10.1016/j.ijpvp.2022.104882 ↗
19. Microstructural characterization and electron backscatter diffraction analysis across the welded interface of duplex stainless steel10.1016/j.apsusc.2017.03.301 ↗
20. The role of silicon alloying addition on the pitting corrosion resistance of an Al-12 wt%Si alloy10.1016/j.electacta.2014.05.034 ↗
21. Effects of the heat treatment on the microstructure and corrosion behavior of 316 L stainless steel manufactured by Laser Powder Bed Fusion10.1016/j.corsci.2022.110777 ↗
22. Corrosion behavior of wire arc additive manufactured and wrought 309 stainless steel in acidic solution10.1016/j.corcom.2022.08.001 ↗
23. Effect of grain size on corrosion behavior of 304 stainless steel in coal chemical high salty wastewater
24. Effect of Si addition on the electrochemical corrosion and passivation behavior of Fe-Cr-Mo-C-B-Ni-P metallic glasses10.1016/j.jnoncrysol.2018.04.036 ↗
25. Corrosion properties of phase reversion induced nano/ultrafine grained AISI304 metastable austenite stainless steel10.1016/j.materresbull.2018.04.024 ↗
26. Characterization of passive films on shape memory stainless steels10.1016/j.corsci.2011.12.022 ↗
27. On the existence of our metals-based civilization: I. phase-space analysis10.1149/1.2195877 ↗
28. Passivity breakdown of 316L stainless steel during potentiodynamic polarization in NaCl solution10.1016/j.corsci.2016.06.011 ↗
29. Mechanism of the element microsegregation induced corrosion difference of Ti6321 weldment10.1016/j.corsci.2023.111194 ↗
30. Pitting behavior of 316L stainless steel in direct culture with mesenchymal stem cells10.1016/j.corsci.2022.110380 ↗
31. Corrosion behaviour of hot-rolled 316L stainless steel-A6 carbon steel composite steel plate for marine environment10.1016/j.jmrt.2023.07.227 ↗
32. Unlocking the influence of microstructural evolution on hardness and pitting corrosion in duplex stainless welded joints10.1016/j.corsci.2022.110532 ↗
33. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
34. Technical note: concerning the conversion of the constant phase element parameter Y0 into a capacitance10.5006/1.3280607 ↗
35. Effect of in-situ transverse magnetic field on microstructure, mechanical properties and corrosion resistance of the directed energy deposited 316L stainless steel
36. Strain-induced reactivation of corrosion pits in austenitic stainless steel10.1016/j.corsci.2017.05.023 ↗
37. Influence of mode of metal transfer on microstructure and mechanical properties of gas metal arc welded modified ferritic stainless steel10.1007/s11661-011-1069-1 ↗
38. Micro structural development and solidification cracking susceptibility of austenitic stainless steel welds10.1179/imr.1991.36.1.16 ↗
39. Comparative studies on microstructure evolution and corrosion resistance of 304 and a newly developed high Mn and N austenitic stainless steel welded joints10.1016/j.corsci.2021.109338 ↗
40. A-TIG welding of dissimilar P92 steel and 304H austenitic stainless steel: mechanisms, microstructure and mechanical properties10.1016/j.jmapro.2019.06.003 ↗
41. Optimization of macro and microstructural characteristics of 316L/2205 dissimilar welds obtained by the GMAW-pulsed process
42. Simulated stress induced sensitization of HAZ in multipass weld of 304LN austenitic stainless steel10.1016/j.jmapro.2020.12.061 ↗
43. Microstructure and corrosion behavior of multipass gas tungsten arc welded 304L stainless steel10.1016/j.matdes.2013.10.064 ↗
44. Effect of alloy composition on the selective oxidation of ternary Fe-Si-Cr, Fe-Mn-Cr model alloys10.1002/sia.2732 ↗
45. Essential role of Si in enhancing corrosion resistance of high strength low alloy steels in marine environment10.1016/j.jmrt.2024.04.108 ↗
46. The influence of silicon on the formation of phosphate coatings for low-carbon IF steels10.1016/j.surfcoat.2022.128599 ↗
47. The effect of grain size and grain boundary misorientation on the corrosion resistance of commercially pure aluminium10.1016/j.corsci.2018.11.035 ↗
48. Homogenisation effect on mechanical and pitting behaviour of 2205 Duplex Stainless Steel10.1080/02670836.2020.1836738 ↗
49. Investigation of intergranular corrosion of 316L stainless steel diffusion bonded joint by electrochemical potentiokinetic reactivation10.1016/j.corsci.2010.09.027 ↗
50. Dependence of corrosion resistance on grain boundary characteristics in a high nitrogen CrMn austenitic stainless steel10.1016/j.jmst.2017.09.016 ↗
51. Passivation properties of ultrafine grain 316L stainless steels manufactured by ball milling and spark plasma sintering10.1016/j.matchemphys.2023.128398 ↗
52. Effect of grain size on pitting corrosion of 304L austenitic stainless steel10.1016/j.corsci.2015.02.024 ↗
53. Study on hot cracking susceptibility of alloy 617M and an analysis on parameters used for its evaluation10.1016/j.jmapro.2021.06.075 ↗
54. Hot deformation behaviors and dynamic softening mechanism of 6%Si high-silicon austenitic stainless steel10.1016/j.jmrt.2023.08.152 ↗