Corrosion Inhibition of AZ31-xLi (x = 4, 8, 12) magnesium alloys in sodium chloride solutions by aqueous molybdate
Source abstract
Abstract
Corrosion of lithium-containing AZ31 magnesium alloys AZ31- x Li ( x = 4, 8, and 12 wt%) has been examined in 0.05 M NaCl solution with and without 10–150 mM of Na 2 MoO 4 inhibitor. Potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and dynamic electrochemical impedance spectroscopy (DEIS) measurements were used to correlate the phase composition and microstructure of the alloys with their corrosion propensity and effectiveness of the molybdate inhibitor, giving high inhibition efficiency (>85%) at concentrations higher than ca. 35 mM. Post-corrosion microstructure, Raman, and X-ray photoelectron spectroscopy analyses allowed to provide the inhibition mechanism of AZ31- x Li alloys by molybdate ions. • Effectiveness of molybdate inhibitor towards AZ31- x Li ( x = 4, 8, and 12 wt%) Mg alloys has been examined. • Dynamic multisine impedance spectroscopy was utilized to examine corrosion and inhibition mechanisms. • Corrosion rate of AZ31- x Li alloys and the inhibition effect of molybdate strongly depend on the amount of Li in the alloys. • A mechanism of corrosion inhibition of AZ31- x Li ( x = 4, 8, and 12 wt%) Mg alloys by molybdate has been proposed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. Magnesium and its alloys applications in automotive industry10.1007/s00170-007-1279-2 ↗
2. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
3. Magnesium implants: prospects and challenges
4. Chromate-free corrosion protection strategies for magnesium alloys—a review: part II—PEO and anodizing10.3390/ma15238515 ↗
5. Plasma electrolytic oxidation of magnesium and its alloys: mechanism, properties and applications10.1016/j.jma.2017.02.004 ↗
6. Corrosion of magnesium alloys: the role of alloying10.1179/1743280414Y.0000000046 ↗
7. Approaching “stainless magnesium” by Ca micro-alloying10.1039/D0MH01380C ↗
8. Review on magnesium and magnesium-based alloys as biomaterials for bone immobilization10.1016/j.jmrt.2023.02.037 ↗
9. Chromate-free corrosion protection strategies for magnesium alloys—a review: PART I—pre-treatment and conversion coating10.3390/ma15238676 ↗
10. Chromate-free corrosion protection strategies for magnesium alloys—a review: Part III—corrosion inhibitors and combining them with other protection strategies10.3390/ma15238489 ↗
11. Chromate-free corrosion protection strategies for magnesium alloys—a review: part II—PEO and anodizing10.3390/ma15238515 ↗
12. New magnesium alloys for transmission parts10.1007/s11041-006-0121-z ↗
13. Applications of magnesium and its alloys: a review10.3390/app11156861 ↗
14. Corrosion mechanisms of magnesium alloys10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N ↗
15. Lithium mapping in a Mg-9Li-4Al-1Zn alloy using electron energy-loss spectroscopy10.1016/j.jma.2023.03.011 ↗
16. Corrosion behavior of Mg−Li alloys: a review10.1016/S1003-6326(21)65728-X ↗
17. Precipitation strengthening in an ultralight magnesium alloy
18. A high-specific-strength and corrosion-resistant magnesium alloy10.1038/nmat4435 ↗
19. Statistical optimization of stress level in Mg-Li-Al alloys upon hot compression testing10.1016/j.jma.2019.03.003 ↗
20. Recent progress in magnesium–lithium alloys10.1179/1743280414Y.0000000044 ↗
21. Improvement of mechanical behaviors of a superlight Mg-Li base alloy by duplex phases and fine precipitates10.1016/j.jallcom.2017.12.025 ↗
22. Strengthening mechanisms of magnesium-lithium based alloys and composites10.1155/2016/1078187 ↗
23. Composition and microstructure dependent corrosion behaviour of Mg-Li alloys10.1016/j.electacta.2017.11.091 ↗
24. Corrosion resistance of as-rolled Mg-Li-AlSi Alloys10.20964/2018.05.16 ↗
25. ASM Specialty Handbook: Magnesium and Magnesium Alloys, ASM INTERNATIONAL, 1999.
26. Microstructure and mechanical properties of Mg 14Li 1Al 0.3La alloys produced by two-pass extrusion10.1016/j.jre.2017.08.001 ↗
27. Microstructures and corrosion resistance of three typical superlight Mg–Li alloys10.3139/146.110988 ↗
28. In vitro and in vivo investigation on biodegradable Mg-Li-Ca alloys for bone implant application10.1007/s40843-018-9293-8 ↗
29. In vitro and in vivo evaluation of multiphase ultrahigh ductility Mg–Li–Zn alloys for cardiovascular stent application10.1021/acsbiomaterials.7b00854 ↗
30. Effect of lithium on the discharge and corrosion behavior of Mg-3 wt% Al alloy as the anode for seawater activated battery10.1007/s11665-018-3750-7 ↗
31. Effects of Li on microstructures, mechanical, and biocorrosion properties of biodegradable Mg 94-x Zn 2 Y 4 Li x alloys with long period stacking ordered phase10.1002/adem.201600606 ↗
32. An ultra-light Mg-Li alloy with exceptional elastic modulus, high strength, and corrosion-resistance
33. The development of β phase Mg–Li alloys for ultralight corrosion resistant applications10.1038/s41529-020-0121-2 ↗
34. Aqueous molybdate provides effective corrosion inhibition of WE43 magnesium alloy in sodium chloride solutions10.1016/j.corsci.2021.109664 ↗
35. Corrosion behavior characterization of as extruded Mg-8Li-3Al alloy with minor alloying elements (Gd, Sn and Cu) by scanning Kelvin probe force microscopy10.1016/j.corsci.2020.108923 ↗
36. Corrosion resistant and high-strength dual-phase Mg-Li-Al-Zn alloy by friction stir processing10.1038/s43246-022-00245-3 ↗
37. Effect of Al composition on the corrosion resistance of Mg-14 mass% Li system alloy10.2320/matertrans.M2016247 ↗
38. Corrosion characterization of Mg–8Li alloy in NaCl solution10.1016/j.corsci.2009.03.011 ↗
39. Exfoliation corrosion of extruded Mg-Li-Ca alloy10.1016/j.jmst.2018.05.014 ↗
40. Inhibiting corrosion of Mg Alloy AZ31B-H24 sheet metal with lithium carbonate10.5006/3625 ↗
41. Corrosion inhibition of aluminium alloy AA6063-T5 by vanadates: local surface chemical events elucidated by confocal Raman micro-spectroscopy10.1016/j.corsci.2018.12.011 ↗
42. Surface and corrosion properties of AA6063-T5 aluminum alloy in molybdate-containing sodium chloride solutions10.1016/j.corsci.2020.108658 ↗
43. Comprehensive screening of Mg corrosion inhibitors10.1016/j.corsci.2017.07.011 ↗
44. Inhibitive effect of sodium molybdate on corrosion of AZ31 magnesium alloy in chloride solutions10.1016/j.electacta.2022.140175 ↗
45. Corrosion inhibition of magnesium alloy AZ31 in chloride-containing solutions by aqueous permanganate10.1007/s10008-023-05472-3 ↗
46. The composition-dependent oxidation film formation in Mg-Li-Al alloys10.1016/j.corsci.2021.109508 ↗
47. On the in-situ aqueous stability of an Mg-Li-(Al-Y-Zr) alloy: Role of Li10.1016/j.corsci.2019.108342 ↗
48. Characterisation of Li in the surface film of a corrosion resistant Mg-Li(-Al-Y-Zr) alloy10.1016/j.apsusc.2019.07.167 ↗
49. Multisine impedimetric monitoring with an in-depth distribution of relaxation times analysis of WE43 and AZ31 magnesium alloys corrosion10.1016/j.measurement.2023.113683 ↗
50. Exploring mechanism of corrosion inhibition of WE43 and AZ31 alloys by aqueous molybdate in Hank’s solution by multisine impedimetric monitoring10.1016/j.corsci.2024.111979 ↗
51. Evaluation of citric acid corrosion inhibition efficiency and passivation kinetics for aluminium alloys in alkaline media by means of dynamic impedance monitoring10.1016/j.electacta.2017.12.017 ↗
52. Understanding the origin of high corrosion inhibition efficiency of bee products towards aluminium alloys in alkaline environments10.1016/j.electacta.2019.03.012 ↗
53. Investigation of the electrochemical behaviour of AA1050 aluminium alloy in aqueous alkaline solutions using Dynamic Electrochemical Impedance Spectroscopy10.1016/j.jelechem.2016.08.028 ↗
54. Corrosion inhibition of aluminum alloy AA6063-T5 by vanadates: microstructure characterization and corrosion analysis10.1149/2.0341803jes ↗
55. Implementing the Nelder-Mead simplex algorithm with adaptive parameters10.1007/s10589-010-9329-3 ↗
56. Mg-alloys for forging applications—a review10.3390/ma13040985 ↗
57. Effect of heat-treatment on microstructure, mechanical and tribological properties of Mg-Li-Al based alloy10.1016/j.jmrt.2020.02.101 ↗
58. Improving corrosion resistance of Mg–Li alloys by Sn microalloying10.1016/j.jmrt.2023.07.205 ↗
59. Quantifying the influence of microstructure on the corrosion of Mg-Li alloys by using X-ray CT10.1016/j.corsci.2024.111848 ↗
60. Microstructure and mechanical properties of Mg–Li alloys fabricated by wire arc additive manufacturing10.1016/j.jmrt.2024.02.094 ↗
61. Deposition and corrosion performance of phosphate-polylactic acid composite coatings on WE43 magnesium alloy10.1016/j.surfcoat.2024.130419 ↗
62. Evidence for enhanced catalytic activity of magnesium arising from anodic dissolution10.1016/j.electacta.2014.03.133 ↗
63. Assessing the corrosion of commercially pure magnesium and commercial AZ31B by electrochemical impedance, mass-loss, hydrogen collection, and inductively coupled plasma optical emission spectrometry solution analysis10.5006/1419 ↗
64. Corrosion Inhibition of AZ31 Mg Alloy by Aqueous Selenite (SeO 3 2−)10.1149/2.0911914jes ↗
65. Corrosion characterization of Mg-8Li alloy in NaCl solution10.1016/j.corsci.2009.03.011 ↗
66. Accurate electrochemical measurement of magnesium corrosion rates; A combined impedance, mass-loss and hydrogen collection study10.1016/j.electacta.2013.12.124 ↗
67. Corrosion of Mg alloys EV31A, WE43B, and ZE41A in chloride- and sulfate-containing solutions saturated with magnesium hydroxide10.1002/maco.201911375 ↗
68. Non-stationarity in electrochemical impedance measurement of Mg-based materials in aqueous media10.1016/j.electacta.2023.143140 ↗
69. Instantaneous impedance monitoring of aluminum alloy 7075 corrosion in borate buffer with admixed chloride ions10.5006/1546 ↗
70. Insight into physical interpretation of high frequency time constant in electrochemical impedance spectra of Mg10.1016/j.corsci.2021.109501 ↗
71. Mg-Ca binary alloys as anodes for primary Mg-air batteries10.1016/j.jpowsour.2018.05.090 ↗
72. Exploration the inhibition mechanism of sodium dodecyl sulfate on Mg alloy10.1016/j.corsci.2020.108559 ↗
73. Corrosion inhibition mechanism of 2,6-pyridinedicarboxylate depending on magnesium surface treatment10.1016/j.corsci.2024.111867 ↗
74. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
75. Corrosion mechanism and hydrogen evolution on Mg10.1016/j.cossms.2014.09.005 ↗
76. Effect of pH on Mg(OH)2 film evolution on corroding Mg by in situ kinetic Raman mapping (KRM)10.1016/j.corsci.2019.03.024 ↗
77. In situ surface film evolution during Mg aqueous corrosion in presence of selected carboxylates10.1016/j.corsci.2020.108484 ↗
78. The polarized infra-red and Raman spectra of Mg(OH)2 and Ca(OH)210.1016/S0022-3697(73)80212-4 ↗
79. Estimation of nucleation and growth parameters from in situ Raman spectroscopy in carbonate systems10.1016/j.jece.2017.12.024 ↗
80. Structural properties of Li2CO3-BaCO3 system derived from IR and Raman spectroscopy10.1016/S0022-2860(01)00703-7 ↗
81. Tytko · 1986
82. A Raman and XPS investigation of supported molybdenum oxide thin films. 1. Calcination and reduction studies10.1021/j100144a020 ↗
83. Micro-Raman study of the m-MoO2 to α-MoO3 transformation induced by cw-laser irradiation10.1016/j.optmat.2010.10.028 ↗
84. Raman spectroscopy of molybdenum oxides: part II. Resonance Raman spectroscopic characterization of the molybdenum oxides Mo4O11 and MoO210.1039/b107046k ↗
85. Study of oxidic and reduced alumina-supported molybdate and heptamolybdate species by in situ laser Raman spectroscopy10.1021/j100311a018 ↗
86. Molybdate-phosphate conversion coatings to protect steel in a simulated concrete pore solution10.1016/j.surfcoat.2018.09.056 ↗
87. Temperature-dependent Raman spectroscopic studies of microstructure present in dipotassium molybdate crystals and their melts10.1002/jrs.4948 ↗
88. Mapping the formation areas of giant molybdenum blue clusters: A spectroscopic study10.1039/c2dt30661a ↗
89. Surface structures of supported molybdenum oxide catalysts
90. Engineered biochar reclaiming phosphate from aqueous solutions: mechanisms and potential application as a slow-release fertilizer10.1021/es4012977 ↗
91. SVET and SIET Study of galvanic corrosion of Al/MgZn 2 in aqueous solutions at different pH10.1149/2.0861803jes ↗
92. Generalized molybdenum oxide surface chemical state XPS determination via informed amorphous sample model10.1016/j.apsusc.2014.11.077 ↗