The impact fretting corrosion behavior and damage mechanism of Inconel 690TT under different impact forces in high temperature pressurized water
Source abstract
Abstract
The impact fretting corrosion of Inconel 690TT under different impact forces was investigated. The results indicated that there was a competitive relationship between formation of third body layer (TBL) and fragmentation of TBL caused by impact force. With the increase of impact forces, damage mechanism changed from adhesive wear to delamination wear, and crack initiation sites gradually shifted from TBL to internal oxidation zone in tribologically transformed structure (TTS) layer. Nanocrystalline boundaries and defects induced by impact force provided channels for internal oxidation. The formation mechanism of TTS was the combined effect of continuous dynamic recrystallization (cDRX) and twin-assisted cDRX.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. A modelling technique for predicting compound impact wear10.1016/j.wear.2007.01.032 ↗
2. PWR steam generator tube and AVB wear under perpendicular impacting
3. LWR water chemistry guidelines10.1016/0149-1970(87)90010-2 ↗
4. Light water reactor (LWR) safety
5. P. Aaltonen, H. HanninenWater chemistry and behavior of materials in PWRs and BWRs, 1997.
6. P.J. Langford. Design, assembly, and inspection of advanced U-bend/antivibration bar configurations for PWR steam generators. (1989).10.1115/1.3265693 ↗
7. Experimental study of dynamic interaction between a steam generator tube and an anti-vibration bar
8. I. Nowlan, A. Ross, M.J. Pettigrew. Dynamics of a Steam Generator Tube Supported by an Anti-Vibration Bar. Proceedings of the 9th International Conference on Flow-Induced Vibrations, Prague, Czech Republic, 2008.
9. Experimental investigation of impact-sliding interaction and fretting wear between tubes and anti-vibration bars in steam generators10.1016/j.net.2019.11.014 ↗
10. Microstructural characteristics of Alloy 690TT subjected to fretting corrosion in high temperature water10.1016/j.corsci.2017.04.009 ↗
11. Effect of normal force on the fretting wear behavior of Inconel 690 TT against 304 stainless steel in simulated secondary water of pressurized water reactor10.1016/j.triboint.2018.05.020 ↗
12. Effects of amplitude and frequency on the wear mode change of Inconel 690 SG tube mated with SUS 40910.1016/j.wear.2014.02.019 ↗
13. Investigation on fretting wear behavior of 690 alloy in water under various temperatures10.1016/j.triboint.2016.05.012 ↗
14. Impact-fretting wear behavior of Inconel 690 alloy tubes effected by pre-compressive stress10.1016/j.jallcom.2017.07.091 ↗
15. Impact fretting wear behavior of alloy 690 tubes in dry and deionized water conditions10.1007/s10033-017-0147-8 ↗
16. Impact fretting wear of alloy 690 tubes at 25 °C and 290 °C10.1016/j.wear.2005.02.020 ↗
17. Effect of the cycle number on fretting wear behavior of alloy 690TT tube in high-temperature pressurized water10.1016/j.jnucmat.2022.153828 ↗
18. Effect of normal force on fretting wear behavior and mechanism of Alloy 690TT in high temperature water10.1016/j.wear.2016.09.018 ↗
19. Fluidelastic instability analysis of operating nuclear steam generator U-tubes10.1016/S0029-5493(99)00173-9 ↗
20. Experimental study and analysis of design parameters for analysis of fluidelastic instability for steam generator tubing10.1016/j.net.2022.09.004 ↗
21. Progress in studying the fretting wear/corrosion of nuclear steam generator tubes10.1016/j.anucene.2020.107556 ↗
22. Effect of oxidation film on the fretting wear behavior of Alloy 690 steam generator tube mated with SUS 40910.1016/j.wear.2016.10.009 ↗
23. Correlation of Support Impact Force and Fretting-Wear for a Heat Exchanger Tube10.1115/1.3264311 ↗
24. Mechanism-based strain gradient plasticity—I. Theory.10.1016/S0022-5096(98)00103-3 ↗
25. In situ Raman spectroscopic analysis of surface oxide films on Ni-base alloy/low alloy steel dissimilar metal weld interfaces in high-temperature water10.1016/j.jnucmat.2014.03.038 ↗
26. Development of an in situ Raman spectroscopic system for surface oxide films on metals and alloys in high temperature water10.1016/j.nucengdes.2004.12.002 ↗
27. In situ Raman spectroscopic investigation of aqueous iron corrosion at elevated temperatures and pressures10.1149/1.1393565 ↗
28. In situ Raman spectroscopic investigation of chromium surfaces under hydrothermal conditions10.1016/S0169-4332(01)00338-5 ↗
29. In situ Raman spectroscopic investigation of stainless steel hydrothermal corrosion
30. Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 71810.1016/j.msea.2016.09.100 ↗
31. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
32. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
33. K.L. Johnson. Contact Mechanics. Cambridge University Press1987.
34. Surface Oxidation and Subsurface Microstructure Evolution of Alloy 690TT induced by partial slip fretting corrosion in high-temperature pure water10.1007/s40195-020-01134-9 ↗
35. Studies on different oxidation behaviors of TiAlN on titanium alloy and stainless steel under thermal cycling10.1016/j.corsci.2021.109865 ↗
36. Microstructural characterization of subsurface caused by fretting wear of Inconel 690TT alloy10.1016/j.matchar.2016.03.010 ↗
37. Oxide properties of deformed Alloy 690TT in caustic solution at high temperature10.1016/j.corsci.2020.108806 ↗
38. Fretting corrosion-induced microstructural evolution of Alloy 690TT tube in high temperature pressurised water10.1016/j.corsci.2022.110774 ↗
39. On the magnetic interaction betwenn Fe3+ and Ni2+ ions occupying octahedral sites in oxyspinels10.1016/0038-1098(71)90085-8 ↗
40. Multiple scattering method applied to the electronic structure and spectra of the impurity ions Cu2+, Ni2+, Co2+, Fe2+ and their tetrahedral environments in ZnO, ZnS and CdS10.1016/0009-2614(75)85144-X ↗
41. S.Y. Persaud, R.C. Newman, A.G. Carcea, G.A. Botton, J. Huang, A. Korinek, S. Ramamurthy. Grain boundary embrittlement of alloy 600 by internal oxidation in simulated primary water environments. International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors2016.
42. Amorphization and structural modification of the oxide film of Ni-based alloy by in-situ H charging in high temperature high pressure water environment10.1016/j.corsci.2020.108474 ↗
43. Internal oxidation and metal dusting of Fe–Si alloys.10.1016/j.corsci.2010.05.045 ↗
44. Subsurface characterization of an oxidation-induced phase transformation and twinning in nickel-based superalloy exposed to oxy-combustion environments10.1016/j.msea.2012.04.066 ↗
45. Diffusion in nanocrystalline materials10.1016/S0022-3697(02)00421-3 ↗
46. The effect of cold rolling on grain boundary structure and stress corrosion cracking susceptibility of twins in alloy 690 in simulated PWR primary water environment10.1016/j.corsci.2017.11.002 ↗
47. Effect of Nb addition on the internal oxidation of novel Ni-base superalloy10.1016/j.corsci.2022.110100 ↗
48. Birks · 2006
49. Chen · 1983
50. Handbook of diagrams. Final report
51. C.M. Chen, K. Aral, G.J. Theus. Computer-calculated potential pH diagrams to 300/sup 0/C. Volume 1. Executive Summary. Final report. [PWR; BWR]. United States: N. p., 1983.10.2172/5871921 ↗
52. Evolution of oxide film of a new martensitic steel 9Cr3W3Co in supercritical water10.1016/j.corsci.2022.110771 ↗
53. High diffusivity pathways govern massively enhanced oxidation during tribological sliding10.1016/j.actamat.2021.117353 ↗
54. Oxide properties of deformed Alloy 690TT in caustic solution at high temperature10.1016/j.corsci.2020.108806 ↗
55. Enhanced reactive diffusion of Zn in a nanostructured Fe produced by means of surface mechanical attrition treatment10.1016/j.actamat.2011.12.016 ↗
56. Nanotwinning-assisted dynamic recrystallization at high strains and strain rates10.1038/s41563-022-01250-0 ↗
57. Sequence and mechanism of early microstructure evolution in alloy 690TT subjected to fretting corrosion in high temperature pressurized water10.1016/j.corsci.2023.111351 ↗
58. Dynamic impact response and microstructural evolution of inconel 690 superalloy at elevated temperatures10.1016/j.ijimpeng.2004.09.007 ↗
59. Strain-Induced Ultrahard and Ultrastable Nanolaminated Structure in Nickel10.1126/science.1242578 ↗
60. Formation of nanolaminated structure in an interstitial-free steel10.1016/j.scriptamat.2014.10.003 ↗
61. Formation of nano-laminated structure in nickel by means of surface mechanical grinding treatment10.1016/j.actamat.2015.06.014 ↗
62. The influence of stacking fault energy on the mechanical properties of nanostructured Cu and Cu-Al alloys processed by high-pressure torsion10.1016/j.scriptamat.2011.01.041 ↗
63. The effect of normal force on fretting corrosion behavior of Inconel 690 in 3.5% sodium chloride10.1016/j.matchar.2017.04.015 ↗
64. Deformation twinning in nanocrystalline materials10.1016/j.pmatsci.2011.05.001 ↗
65. Enhanced fracture toughness of bulk nanocrystalline Cu with embedded nanoscale twins10.1016/j.scriptamat.2008.12.012 ↗