Towards a better understanding of hydrogen-assisted cracking in multiphase stainless steel
Source abstract
Abstract
Given the high strength of multiphase stainless steel, it is imperative to study its hydrogen embrittlement behavior. However, the understanding of hydrogen-assisted crack initiation and propagation is limited. In this study, we investigate the hydrogen-assisted cracking behavior of multiphase stainless steel through crack analysis, hydrogen permeation test, and hydrogen desorption experiments. Our findings reveal that hydrogen-assisted cracks initiate at the martensite packet boundaries and propagate along the packet boundaries, block boundaries, prior austenite grain boundaries and through ferrite. Additionally, we have elucidated the hydrogen trap sources and proposed a hydrogen-assisted cracking mechanism.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Elucidating the temperature dependence of TRIP in Q&P steels using synchrotron X-ray diffraction, constituent phase properties, and strain-based kinetics models10.1016/j.actamat.2022.118126 ↗
2. A review of current state and prospect of the manufacturing and application of advanced hot stamping automobile steels
3. Local microstructure and mechanical characteristics of HAZ and tensile behavior of laser welded QP980 joints10.1016/j.msea.2022.143862 ↗
4. Microstructure and mechanical properties of a novel cast multi-phase stainless steel10.1016/j.jmrt.2022.06.138 ↗
5. A novel cast multiphase stainless steel with high strength and high toughness10.1007/s11661-023-07039-3 ↗
6. In-situ measurement of hydrogen entry and hydrogen embrittlement of steel by atmospheric corrosion10.1016/j.corsci.2023.111212 ↗
7. Environmental embrittlement of automobile spring steels caused by wet–dry cyclic corrosion in sodium chloride solution10.1016/j.corsci.2004.10.008 ↗
8. Effect of plastic strain damage on the hydrogen embrittlement of a dual-phase (DP) and a quenching and partitioning (Q&P) advanced high-strength steel10.1016/j.msea.2020.139343 ↗
9. Investigation for enhancing the resistance of H-induced delayed cracking for martensitic steel by quenching tempering and quenching partitioning: influence of microstructure on hydrogen embrittlement and cracking behavior10.1016/j.ijhydene.2022.06.059 ↗
10. A review of research status of hydrogen embrittlement for automotive advanced high-strength steels
11. Hydrogen embrittlement of a quenching and partitioning steel during corrosion and zinc electroplating10.1016/j.msea.2018.12.022 ↗
12. Study on the hydrogen-induced delayed fracture behavior of Q-P980 and MS98010.1088/2053-1591/ac3bf6 ↗
13. Slow strain rate tensile test results of new multiphase 17% Cr stainless steel under hydrogen cathodic charging10.1016/j.ijhydene.2015.05.148 ↗
14. Influence of microstructure in the hydrogen permeation in martensitic-ferritic stainless steel10.1016/j.ijhydene.2015.06.102 ↗
15. Effect of low-temperature sensitization on hydrogen embrittlement of 301 stainless steel10.3390/met7020058 ↗
16. Enhanced stability of retained austenite and consequent work hardening rate through pre-quenching prior to quenching and partitioning in a Q–P microalloyed steel10.1016/j.msea.2014.05.074 ↗
17. The slow strain rate stress corrosion cracking test—a 50 year retrospective10.5006/2137 ↗
18. Hydrogen trapping and embrittlement susceptibility in Al-Cu-Li alloys10.1016/j.corsci.2023.111628 ↗
19. Research on hydrogen embrittlement behavior of L-PBF 18Ni(300) maraging steel by experiments and numerical simulations10.1016/j.actamat.2023.119141 ↗
20. Hydrogen embrittlement suscetibility on X-120 microalloyed steel as function of tempering temperature10.1016/j.ijhydene.2020.01.094 ↗
21. The mechanism of hydrogen evolution on iron in acid solutions by determination of permeation rates10.1149/1.2426195 ↗
22. Analysis of hydrogen-induced delayed cracking and hydrogen trapping behavior in plastically deformed quenching and partitioning steel10.1016/j.corsci.2023.111437 ↗
23. A nano-sized NbC precipitation strengthened FeCoCrNi high entropy alloy with superior hydrogen embrittlement resistance10.1016/j.corsci.2022.110636 ↗
24. Effect of vanadium content on hydrogen embrittlement of 1400 MPa grade high strength bolt steels10.1016/j.ijhydene.2021.08.060 ↗
25. Yu · 1989
26. High strength and ductility of additively manufactured 316L stainless steel explained10.1007/s11661-018-4607-2 ↗
27. Residual stress relaxation and microstructure evolution in cold radial forged high-strength steel tube using thermal-vibratory stress relief technique
28. Assessment of geometrically necessary dislocation levels derived by 3D EBSD10.1016/j.actamat.2015.06.051 ↗
29. Excellent dynamic-mechanical behavior assisted by stacking faults in a nano-coherent high-entropy alloy10.1016/j.msea.2023.144727 ↗
30. Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel10.1016/j.jmst.2020.04.001 ↗
31. High-pressure induced the morphological evolution from lath to integrated martensite with {112} <111> nano-twins of 30MnSi steel10.1016/j.msea.2023.145286 ↗
32. Effects of stacking fault energy and temperature on grain boundary strengthening, intrinsic lattice strength and deformation mechanisms in CrMnFeCoNi high-entropy alloys with different Cr/Ni ratios10.1016/j.actamat.2022.118541 ↗
33. The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation10.1016/j.actamat.2015.08.030 ↗
34. Study of hydrogen-induced delayed fracture in high-Mn TWIP/TRIP steels during in situ electrochemical hydrogen-charging: role of microstructure and strain rate in crack initiation and propagation10.1016/j.corsci.2019.108191 ↗
35. Characteristics and mechanisms of hydrogen-induced quasi-cleavage fracture of lath martensitic steel10.1016/j.actamat.2021.116635 ↗
36. Characteristics and formation mechanism of serrated markings on the hydrogen-related quasi-cleavage fracture in as quenched low-carbon martensitic steel10.1016/j.scriptamat.2023.115568 ↗
37. Revealing hydrogen-induced delayed fracture in ferrite-containing quenching and partitioning steels10.1016/j.mtla.2018.09.022 ↗
38. The role of the microstructure on the influence of hydrogen on some advanced high-strength steels10.1016/j.msea.2017.12.079 ↗
39. Effect of deformation and charging conditions on crack and blister formation during electrochemical hydrogen charging10.1016/j.actamat.2017.01.013 ↗
40. Electrochemical hydrogen charging to simulate hydrogen flaking in pressure vessel steels10.1016/j.engfracmech.2019.106546 ↗
41. Characterization of hydrogen induced cracking in TRIP-assisted steels10.1016/j.ijhydene.2015.06.017 ↗
42. Hydrogen embrittlement of automotive advanced high-strength steels10.1007/s11661-012-1280-8 ↗
43. Hydrogen diffusivity in different microstructural components in martensite matrix with retained austenite10.1016/j.ijhydene.2020.12.007 ↗
44. Nitrogen effect on hydrogen diffusivity and hydrogen embrittlement behavior in austenitic stainless steels10.1016/j.scriptamat.2020.03.038 ↗
45. Hydrogen trapping in some advanced high strength steels10.1016/j.corsci.2016.05.046 ↗
46. Effect of alloying elements on the hydrogen diffusion and trapping in high entropy alloys10.1016/j.scriptamat.2021.113957 ↗
47. Quantification of hydrogen trapping in multiphase steels: part I–point traps in martensite10.1016/j.actamat.2020.05.007 ↗
48. The significant effect of tantalum on the hydrogen-induced cracking of pipeline steel: morphology, hydrogen permeation, and theoretical studies10.1016/j.corsci.2022.110213 ↗
49. Understanding the effect of niobium on hydrogen-induced blistering in pipeline steel: a combined experimental and theoretical study10.1016/j.corsci.2019.108142 ↗
50. Role of microstructure on electrochemical hydrogen permeation properties in advanced high strength steels10.1016/j.ijhydene.2018.04.241 ↗
51. Effect of retained austenite stability and morphology on the hydrogen embrittlement susceptibility in quenching and partitioning treated steels10.1016/j.msea.2016.02.026 ↗
52. Shewmon · 2016
53. Distinct effects of in-situ and ex-situ hydrogen charging methods on the mechanical behavior of CoCrFeNi high-entropy alloy fabricated by laser-powder bed fusion10.1016/j.jallcom.2023.168858 ↗
54. Influence of hydrogen on softened heat-affected zones during in-situ slow strain rate testing in advanced high-strength steel welds10.1016/j.corsci.2020.109229 ↗
55. Identification of microstructure factors affecting hydrogen embrittlement of a 2205 duplex stainless steel10.1016/j.corsci.2022.110643 ↗
56. Hydrogen embrittlement and hydrogen diffusion behavior in interstitial nitrogen-alloyed austenitic steel10.1016/j.ijhydene.2021.07.084 ↗
57. Hydrogen-enhanced-plasticity mediated decohesion for hydrogen-induced intergranular and “quasi-cleavage” fracture of lath martensitic steels10.1016/j.jmps.2017.12.016 ↗
58. Chu · 2013
59. Effect of hydrogen trapping on hydrogen permeation in a 2205 duplex stainless steel: role of austenite–ferrite interface10.1016/j.corsci.2022.110332 ↗
60. Prevention of hydrogen embrittlement in steels10.2355/isijinternational.ISIJINT-2015-430 ↗
61. The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel10.1016/j.actamat.2016.04.038 ↗
62. The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: localized plasticity and decohesion10.1016/j.engfracmech.2019.106528 ↗
63. Hydrogen embrittlement of industrial components: prediction, prevention, and models10.5006/1958 ↗
64. Prediction of hydrogen-assisted fracture under coexistence of hydrogen-enhanced plasticity and decohesion
65. Combined effect of cathodic potential and sulfur species on calcareous deposition, hydrogen permeation, and hydrogen embrittlement of a low carbon bainite steel in artificial seawater10.1016/j.corsci.2019.07.013 ↗
66. Grain-boundary engineering markedly reduces susceptibility to intergranular hydrogen embrittlement in metallic materials10.1016/j.actamat.2009.05.012 ↗
67. Application of electron backscattered diffraction to cleavage fracture in duplex stainless steel10.1016/S1359-6462(99)00095-0 ↗