Effects of Y addition on the pre-oxidation and corrosion behaviours of the alumina/niobium aluminide coatings on the surface of niobium core
Source abstract
Abstract
Y-modified alumina/niobium aluminide coatings were prepared on the surface of the niobium substrate by pack cementation and subsequent pre-oxidation treatments. The pre-oxidation behaviour of the Y-modified and undoped alumina/niobium aluminide coatings in the air atmosphere at 1300 ℃ and their corrosion behaviour in the molten DZ4125L superalloy at 1500 ℃ were investigated in this study. It was demonstrated that the Y addition could reduce the growth rate of the oxide scale, suppress the localised oxidation failure and improve the molten superalloy corrosion-resistance of the alumina/niobium aluminide coatings. The mechanism of Y modification has also been revealed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Power generation with gas turbine systems and combined heat and power10.1016/S1359-4311(00)00016-8 ↗
2. Numerical assessment of round-to-slot film cooling performances on a turbine blade under engine representative conditions10.1016/j.icheatmasstransfer.2018.12.008 ↗
3. Cores for use in precision investment casting
4. Refractory metal core
5. Refractory metal core cooling technologies for curved leading edge slots
6. Airfoil trailing edge cooling
7. Engine component having platform with passageway
8. A review of gas turbine effusion cooling studies10.1016/j.ijheatmasstransfer.2013.07.071 ↗
9. A comparative study of two kinds of Y and Al modified silicide coatings on an Nb–Ti–Si based alloy prepared by pack cementation technique10.1016/j.corsci.2011.08.040 ↗
10. Influence of SiO2 glass phase (SGP) content on the oxidation and diffusion behavior of MoSi2 coatings on Nb-based alloys10.1016/j.corsci.2022.110372 ↗
11. Formation and oxidation behavior of SiO2/NbSi2 multilayer coating fabricated by one-step method10.1016/j.surfcoat.2022.129117 ↗
12. A new thermodynamically stable Nb2Ni intermetallic compound phase revealed by peritectoid transition within binary Nb-Ni alloy system10.1016/j.jmst.2021.07.001 ↗
13. Thermodynamic re-assessment of binary Cr-Nb system down to 0 K10.1016/j.calphad.2018.06.001 ↗
14. Thermodynamic description of the systems Co–Nb, Al–Nb and Co–Al–Nb10.1016/j.jallcom.2015.02.182 ↗
15. Refractory metal core coatings
16. Preparation of alumina/aluminide coatings on molybdenum metal substrates, and protection performance evaluation utilizing a DZ40M superalloy casting test10.1016/j.surfcoat.2020.125931 ↗
17. Preparation and corrosion behavior of the Al-modified MoSi2/Al2O3 coating on the surface of molybdenum metal core10.1016/j.corsci.2021.109879 ↗
18. Oxidation and intergranular disintegration of the aluminides NiAl and NbAl3 and phases in the system Nb-Ni-Al10.1007/BF00738286 ↗
19. Protective aluminide coatings for refractory metals10.1007/s11085-016-9650-z ↗
20. Structure and oxidation behavior of Si–Y co-deposition coatings on an Nb silicide based ultrahigh temperature alloy prepared by pack cementation technique10.1016/j.surfcoat.2009.07.031 ↗
21. Characterization of microstructure and oxidation resistance of Y modified silicide composite coating on Mo–Cr–W–Al–Ti substrate10.1016/j.ceramint.2021.12.187 ↗
22. Development of silicide coatings over Nb–NbCr2 alloy and their oxidation behavior at 1250°C10.1016/j.surfcoat.2014.07.058 ↗
23. The oxidation behavior of Y2O3-dispersed β-NiAl10.1023/B:OXID.0000025335.62402.79 ↗
24. Improved hot corrosion resistance of Y–Ce–Co-modified aluminide coating on nickel base superalloys by pack cementation process10.1016/j.corsci.2014.11.043 ↗
25. Cyclic oxidation behavior of Hf/Zr co-doped EB-PVD β-NiAl coatings at 1200°C10.1016/j.surfcoat.2015.05.039 ↗
26. Oxidation resistance of a Zr-doped NiAl coating thermochemically deposited on a nickel-based superalloy10.1016/j.surfcoat.2009.09.073 ↗
27. Effect of Y2O3 content in the pack on microstructure and hot corrosion resistance of Y–Co-modified aluminide coating10.1016/j.corsci.2014.05.018 ↗
28. Effect of Y2O3 content in the pack mixtures on the cyclic-oxidation of Y2O3-modified low temperature aluminide coatings on 309 stainless steel10.1016/j.vacuum.2018.09.047 ↗
29. Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect10.1007/BF01046818 ↗
30. Oxidation behavior of NiCrAl Alloy with La and Y additives: kinetics and microscopic observation10.1134/S0018151X20020121 ↗
31. Size effects of Y-enriched intermetallic precipitates in Fe-20Cr-5Al-0.25Y alloy on the spallation resistance of thermally grown α-Al2O3 scales10.1016/j.corsci.2020.108796 ↗
32. Deposition of aluminide and silicide based protective coatings on niobium10.1016/j.apsusc.2010.07.055 ↗
33. Aluminum pack cementation on Mo–Si–B alloys: kinetics and lifetime prediction10.1149/1.2775164 ↗
34. The solid-solubility of oxygen in Nb and Nb-rich Nb-Hf, Nb-Mo and Nb-W alloys: Part I: the Nb-O system10.1016/0022-5088(67)90140-3 ↗
35. Lattice dynamics and thermodynamic properties of Y3Al5O12 (YAG
36. Investigation of the microstructure and electronic features for Ce3+-doped YAG crystal: a first-principle study10.1016/j.commatsci.2021.110762 ↗
37. Y/Hf-doped AlCoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance10.1016/j.corsci.2019.108426 ↗
38. Quantification of aluminum outward diffusion during oxidation of FeCrAl alloys10.1007/s11085-005-4391-4 ↗
39. 18O/SIMS characterization of the growth mechanism of doped and undoped α-Al2O310.1007/BF00665610 ↗
40. Low thermal conductivity in garnets10.1111/j.1151-2916.1997.tb02937.x ↗
41. YAG thermal barrier coatings deposited by suspension and solution precursor thermal spray10.1016/j.ceramint.2021.05.087 ↗