Abnormal selective dissolution by the partial recrystallization in a plastically deformed austenitic stainless steel
Source abstract
Abstract
Abstract The influence of microstructure evolution during ageing on the corrosion behavior of deformed Super304H stainless steel was studied. For deformed specimen after ageing, an abnormal dissolution current peak existed in the potentiodynamic polarization curve at early passivation when surface passive film was thin and sensitive to galvanic corrosion, which terminated as passivation proceeded to a complete and compact film. Partial recrystallization during ageing formed uneven microstructure where the recrystallized coarse grains were selectively dissolved due to their inferior corrosion resistance compared to the residual nano-grains. Increased recrystallization region in the over-deformed state intensified the selective dissolution to a higher current peak.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Structural evolutions of metallic materials processed by severe plastic deformation10.1016/j.mser.2018.06.001 ↗
2. Nanostructured materials: basic concepts and microstructure10.1016/S1359-6454(99)00285-2 ↗
3. Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment10.1016/j.scriptamat.2006.01.049 ↗
4. Beneficial effect of shot peening on steamside oxidation of 300-series austenitic steels: an electrochemical study10.1016/j.apsusc.2017.08.035 ↗
5. Beneficial effect of cold-working on high temperature oxidation resistance of austenitic stainless steel10.1016/j.corsci.2019.108149 ↗
6. Passive film growth mechanism of nanocrystalline 304 stainless steel prepared by magnetron sputtering and deep rolling techniques10.1016/j.electacta.2011.05.106 ↗
7. Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing10.1016/j.corsci.2011.08.049 ↗
8. Effect of nanocrystalline structure on the corrosion of a Fe20Cr alloy10.1016/S1452-3981(23)14806-1 ↗
9. Electrochemical characteristics of nano and microcrystalline Fe-Cr alloys10.1007/s10853-012-6529-5 ↗
10. Deformation-induced martensite in austenitic stainless steels: a review10.1007/s43452-020-00130-1 ↗
11. Enhanced pitting resistance through designing a high-strength 316L stainless steel with heterostructure10.1016/j.jmrt.2020.12.005 ↗
12. Deformation mechanisms of 304L stainless steel with heterogeneous lamella structure10.1016/j.msea.2018.11.047 ↗
13. Microstructural evolutions during annealing of plastically deformed AISI 304 austenitic stainless steel: martensite reversion, grain refinement, recrystallization, and grain growth10.1007/s11661-016-3589-1 ↗
14. Processing and properties of reversion-treated austenitic stainless steels10.3390/met10020281 ↗
15. Effect of shot peening on the intergranular corrosion susceptibility of a novel Super304H austenitic stainless steel10.1007/s11665-015-1806-5 ↗
16. The influence of nanocrystalline structure and processing route on corrosion of stainless steel: a review10.1016/j.corsci.2014.11.041 ↗
17. Mechanical and electrochemical behavior of nanocrystalline surface of 304 stainless steel10.1016/S0013-4686(02)00365-1 ↗
18. Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel10.1016/j.corsci.2013.04.056 ↗
19. Electrochemical investigation of passive film in pre-deformation AISI 304 stainless steels10.1016/j.apsusc.2012.08.058 ↗
20. Boiler materials for ultra-supercritical coal power plants—steamside oxidation10.1361/105994906X108756 ↗
21. High temperature oxidation behaviour of AISI 321 stainless steel with an ultrafine-grained surface at 800 °C in Ar–20 vol.% O210.1016/j.corsci.2019.108282 ↗
22. Influence of Surface Mechanical Attrition Treatment on the oxidation behaviour of 316L stainless steel10.1016/j.corsci.2018.03.007 ↗
23. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
24. Corrosion properties of phase reversion induced nano/ultrafine grained AISI 304 metastable austenite stainless steel10.1016/j.materresbull.2018.04.024 ↗
25. Corrosion of ultra-fine grained copper fabricated by equal-channel angular pressing10.1016/j.corsci.2008.01.024 ↗
26. Microstructure and thermal stability of bulk nanocrystalline alloys produced by surface mechanical attrition treatment10.1016/j.apsusc.2013.12.008 ↗
27. In-situ EBSD investigation of thermal stability of a 316L stainless steel nanocrystallized by Surface Mechanical Attrition Treatment10.1016/j.matlet.2019.127249 ↗
28. Introduction
29. Effect of surface nanocrystallization on the sensitization and desensitization behavior of Super304H stainless steel10.1016/j.corsci.2016.06.012 ↗
30. An insight into oversaturated deformation-induced sigma precipitation in Super304H austenitic stainless steel10.1016/j.matdes.2019.108056 ↗
31. Interpretation for the fast sigma phase precipitation in the high intensity shot peened nanocrystallined Super304H stainless steel10.1016/j.apsusc.2018.08.097 ↗
32. Microstructural evolutions during reversion annealing of cold-rolled AISI 316 austenitic stainless steel10.1007/s11661-018-4583-6 ↗
33. Use of the voigt function in a single-line method for the analysis of x-ray-diffraction line broadening10.1107/S0021889882012035 ↗
34. Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: mechanisms, microstructures, mechanical properties, and TRIP effect10.1016/j.matchar.2015.03.031 ↗
35. Effects of nanocrystallization on the corrosion behavior of 309 stainless steel10.1016/j.electacta.2005.12.034 ↗
36. Effects of strain and strain-induced alpha’-martensite on passive films in AISI 304 austenitic stainless steel10.1016/j.msec.2013.10.003 ↗
37. The effect of pre-deformation on corrosion resistance of the passive film formed on 2205 duplex stainless steel10.1016/j.jallcom.2016.06.003 ↗
38. The negative effect of high-intensity shot-peening on the intergranular corrosion behavior of the Super304H austenitic stainless steel10.1016/j.corsci.2018.08.026 ↗
39. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
40. Work-hardening and recovery of dispersion hardened alloys10.1080/14786437608222029 ↗
41. Precipitation hardening in metals10.1179/026708399773002782 ↗
42. Particle stimulated nucleation of recrystallization at silica particles in nickel10.1016/S1359-6462(00)00442-5 ↗
43. Particle stimulated nucleation during dynamic recrystallization using a cellular automata model10.1016/j.scriptamat.2005.01.012 ↗
44. High temperature deformation and dynamic recrystallization of some two phase copper alloys
45. Microstructure and property evolutions of a novel Super304H steel during high temperature creeping10.1080/09603409.2017.1376831 ↗
46. Stacking fault energies and slip in nanocrystalline metals10.1038/nmat1136 ↗
47. Grain boundary formation by remnant dislocations from the de-twinning of thin nano-twins10.1016/j.scriptamat.2015.01.001 ↗
48. The influence of stacking fault energy on the mechanical properties of nanostructured Cu and Cu-Al alloys processed by high-pressure torsion10.1016/j.scriptamat.2011.01.041 ↗
49. Grain-size effect on the deformation mechanisms of nanostructured copper processed by high-pressure torsion10.1063/1.1757035 ↗
50. Continuous recrystallization in austenitic stainless steel after large strain deformation10.1016/S1359-6454(02)00013-7 ↗
51. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
52. Influence of cold-worked structure on electrochemical properties of austenitic stainless steels10.1007/s11661-007-9224-4 ↗
53. Influence of cold work on pitting corrosion behavior of a high nitrogen stainless steel10.1149/1.2939213 ↗
54. Influence of the individual microstructural features on pitting corrosion in type 304 austenitic stainless steel10.1016/j.corsci.2019.108091 ↗
55. The influence of strain on the passive behavior of carbon steel in cement extract10.1016/j.corsci.2012.08.060 ↗