Conception of corrosion converter for magnesium alloy surface: Replacing the corrosion product layer with a protective coating in high concentration corrosion medium
Source abstract
Abstract
A novel concept of corrosion converter tailored for Mg alloys is introduced. Addition of Na 2CO 3 as a corrosion converter for corroded AZ61 Mg alloys can transform corrosion products into protective coatings in 0.6 M NaCl solution. Electrochemical tests and surface characterizations are performed to illustrate this transformation. Results suggest that the introduction of 0.5 M Na 2CO 3 effectively eliminates corrosion products from AZ61 Mg alloy, leading to the formation of a dense protective coating primarily composed of magnesium carbonate/hydroxycarbonate even within high-concentrated corrosive environments. This innovation in corrosion conversion represents a promising approach for advanced corrosion protection in Mg alloy applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. A high-specific-strength and corrosion-resistant magnesium alloy10.1038/nmat4435 ↗
2. Enhanced degradation performance and promoted bone regeneration of novel CaCO3-based hybrid coatings on magnesium alloy as bioresorbable orthopedic implants10.1016/j.cej.2023.143460 ↗
3. Optimizing microstructure and enhancing hydrogen storage properties in Mg alloy via tailoring Ni and Si element
4. Rapid corrosion rates and high mechanical properties of as-extruded Mg–Er–Ni alloys by introducing LPSO and γ′ phases10.1016/j.jmrt.2023.04.157 ↗
5. Enhanced corrosion resistance of Mg alloy embedded in Cl--containing Portland cement with the formation of CaCO3-coated Mg(Al)O passive film via one-step pulse electrodeposition10.1016/j.corsci.2023.111751 ↗
6. Enhanced degradation properties of Mg-Gd-Ni alloys by regulating LPSO morphology10.1016/j.jpcs.2022.110974 ↗
7. Corrosion and passivation of magnesium alloys10.1016/j.corsci.2016.05.041 ↗
8. Towards development of a high-strength stainless Mg alloy with Al-assisted growth of passive film
9. Self-healing performance and corrosion resistance of phytic acid/cerium composite coating on microarc-oxidized magnesium alloy10.1016/j.cej.2021.131198 ↗
10. Corrosion resistance of a superhydrophobic calcium carbonate coating on magnesium alloy by ultrasonic cavitation-assisted chemical conversion10.1016/j.corsci.2022.110841 ↗
11. Ratio of total acidity to pH value of coating bath: A new strategy towards phosphate conversion coatings with optimized corrosion resistance for magnesium alloys10.1016/j.corsci.2019.01.046 ↗
12. Corrosion resistance of a calcium carbonate coating prepared by ultrasound-assisted chemical conversion in calcium disodium edetate solution
13. Surface characterization and corrosion behavior of calcium phosphate (Ca-P) base composite layer on Mg and its alloys using plasma electrolytic oxidation (PEO): A review10.1016/j.jma.2020.07.004 ↗
14. Self-healing performance and corrosion resistance of a bilayer calcium carbonate coating on microarc-oxidized magnesium alloy10.1016/j.corsci.2022.110927 ↗
15. Formation of protective conversion coating on Mg surface by inorganic inhibitor10.1016/j.corsci.2023.111044 ↗
16. The effect of selected corrosion inhibitors on localized corrosion of magnesium alloy: the expanded understanding of “inhibition efficiency,”10.1016/j.corsci.2023.111650 ↗
17. Corrosion inhibition mechanism of 2,6-pyridinedicarboxylate depending on magnesium surface treatment10.1016/j.corsci.2024.111867 ↗
18. Revealing anti-corrosion behavior of magnesium alloy in simulated concrete pore solution10.1016/j.matlet.2020.129047 ↗
19. Formation of a calcium hydrogen phosphate coating on AZ41 magnesium alloy by ultrasound-assisted chemical conversion for concrete formwork
20. “Smart” micro/nano container-based self-healing coatings on magnesium alloys: a review10.1016/j.jma.2023.06.006 ↗
21. Aqueous molybdate provides effective corrosion inhibition of WE43 magnesium alloy in sodium chloride solutions10.1016/j.corsci.2021.109664 ↗
22. Study of the corrosion protection behavior of neutral water-based rust remover on carbon steel10.1016/j.colsurfa.2018.08.071 ↗
23. Novel diglycolic acid-based deep eutectic solvents and their applications as a rust remover10.1016/j.molliq.2020.113380 ↗
24. A new monitoring method for metal rust removal states in pulsed laser derusting via acoustic emission techniques10.1016/j.jmatprotec.2019.116321 ↗
25. A tem investigation of naturally formed oxide films on pure magnesium10.1016/S0010-938X(97)00037-1 ↗
26. Turning a native or corroded Mg alloy surface into an anti-corrosion coating in excited CO2
27. Degradation mechanism of micro-arc oxidation coatings on biodegradable Mg-Ca alloys: The influence of porosity10.1016/j.jallcom.2016.11.146 ↗
28. Improved corrosion resistance of magnesium alloy in simulated concrete pore solution by hydrothermal treatment10.1155/2020/4860256 ↗
29. Revealing anti-corrosion behavior of Mg alloy concrete formwork coated with release agents in Cl−-containing Portland cement paste10.1016/j.conbuildmat.2023.133413 ↗
30. Inhibitive effect of sodium carbonate on corrosion of AZ31 magnesium alloy in NaCl solution10.1016/j.corsci.2020.109131 ↗
31. Kaminski · 2016
32. Localized accelerated degradation of magnesium: a new insight into the mechanism of its biomedical degradation10.1016/j.corsci.2024.112335 ↗
33. The effect of solute segregated stacking faults on the corrosion behavior of Mg-Gd-Cu alloys10.1016/j.corsci.2022.110689 ↗
34. Enhancing corrosion resistance of the CaCO3/MgO coating via ultrasound-assisted chemical conversion with addition of ethylenediamine tetra-acetic acid (EDTA) on AZ41 Mg alloy10.1016/j.surfcoat.2023.129687 ↗
35. A new design strategy for the crack-free composite CaHPO4⋅2H2O/CaCO3 coating on AZ41 Mg alloy for magnesium concrete formwork10.1016/j.surfcoat.2023.129784 ↗
36. Exfoliation of an extruded Mg-4Li-1Ca alloy in presence of glucose and bovine serum albumin10.1038/s41529-024-00425-1 ↗
37. Development of the CaCO3-coated passive film on Mg alloy densified by glucose/sodium gluconate via the assistance of ultrasound with a regrowth feature in Portland cement10.1016/j.compositesb.2024.111719 ↗
38. Effect of hierarchical precipitates on corrosion behavior of fine-grain magnesium-gadolinium-silver alloy10.1016/j.corsci.2021.109924 ↗
39. Corrosion behavior of Mg-5.7Gd-1.9Ag Mg alloy sheet10.1016/j.jallcom.2022.165241 ↗
40. Corrosion product formation during NaCl induced atmospheric corrosion of magnesium alloy AZ91D10.1016/j.corsci.2006.08.004 ↗
41. Towards development of anticorrosive CaCO3-coated passive layer on Mg alloy with ultrasound-assisted electrodeposition10.1016/j.corsci.2023.111546 ↗
42. Study of dehydration of magnesium hydroxide10.1021/j100027a033 ↗
43. Analysis of the surface film formed on Mg by exposure to water using a FIB cross-section and STEM-EDS10.1016/j.corsci.2012.03.001 ↗
44. Enhancing surface protection of Mg alloy concrete formwork: magnesium carbonate-based coatings under varied pH conditions via ultrasonic-cavitated chemical conversion10.1016/j.jmrt.2024.06.220 ↗