Effect of thickness and cracking phenomena on the photocatalytic performances of Ti/TiO2 photoanodes produced by dip coating
Source abstract
Abstract
Abstract Photoanodes for water-splitting applications were produced by coating acid-treated Ti slabs using an aqueous dispersion of TiO2, polyvinyl alcohol and glycerol. Such components were adjusted to achieve a lower viscosity at a 10 s−1 shear rate, considered as representative of the dip-coating application, for the sake of reducing the final coating thickness while increasing its quality. A correlation was found between the thickness of the oxide layer and the percentage of area occupied by the crevices, which appeared, during the thermal treatment, as an effect of the liquid phase removal. Also, the adhesion appeared to be strongly related to the cracking phenomena, since less cracked samples withstood much lower weight losses during the adhesion tests. The lower adhesion of thicker coatings was found to affect the photo-catalytic performances of the photoanodes, showing lower photocurrents and efficiencies when compared with thinner ones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. U. S. E. I. A. (EIA) · 2017
2. A review on production, storage of hydrogen and its utilization as an energy resource10.1016/j.jiec.2013.07.037 ↗
3. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
4. Photoelectrochemical cells10.1038/35104607 ↗
5. Preparation and optimization of TiO2 photoanodes fabricated by pulsed laser deposition for photoelectrochemical water splitting10.1007/s10008-017-3639-7 ↗
6. Principles on design and fabrication of nanomaterials as photocatalysts for water-splitting10.1016/j.rser.2015.12.117 ↗
7. Lewerenz · 2013
8. Effective strategies towards high-performance photoanodes for photoelectrochemical water splitting10.3866/PKU.WHXB201607293 ↗
9. Semiconductor-based photocatalytic hydrogen generation10.1021/cr1001645 ↗
10. Visible-light-induced photocatalytic activity of TiO2-xNy prepared by solvothermal process in urea-alcohol system10.1016/j.jeurceramsoc.2005.05.012 ↗
11. Optimization of N-doped TiO2 multifunctional thin layers by low frequency PECVD process10.1016/j.jeurceramsoc.2017.05.010 ↗
12. Preparation and characterization of Co-doped TiO2 materials for solar light induced current and photocatalytic applications10.1016/j.matchemphys.2012.04.062 ↗
13. Synthesis of Fe/Co-doped titanate nanotube as redox catalyst for photon-induced water splitting10.1016/j.matchemphys.2018.06.058 ↗
14. Photoexcitation of TiO2 photoanode in water splitting10.1016/j.matchemphys.2013.11.056 ↗
15. Photocatalytic hydrogen production using metal doped TiO2: a review of recent advances10.1016/j.apcatb.2018.11.080 ↗
16. Semiconductor nanostructure-based photoelectrochemical water splitting: a brief review10.1016/j.cplett.2011.03.074 ↗
17. Nanostructured TiO2 for energy conversion and storage10.1039/c3ra44031a ↗
18. Electrophoretic deposition of nanoscale TiO2: technology and applications10.1016/j.jeurceramsoc.2015.05.030 ↗
19. Microstructure and optical properties of TiO2 thin films prepared by low pressure hot target reactive magnetron sputtering10.1016/j.tsf.2006.01.049 ↗
20. Multilayer formation via spinodal decomposition in TiO2-VO2 epitaxial films on sapphire substrates10.1016/j.jeurceramsoc.2018.07.035 ↗
21. Titanium oxide films prepared by sputtering, sol gel and dip coating methods for photovoltaic application10.1016/j.egypro.2013.06.789 ↗
22. An efficient and low-cost TiO2 compact layer for performance improvement of dye-sensitized solar cells10.1016/j.electacta.2008.09.025 ↗
23. Dip-coating process engineering and performance optimization for three-state electrochromic devices10.1186/s11671-017-2163-0 ↗
24. Investigations on the photocatalytic activity of sol-gel derived plain and Fe3+/Nb5+-doped titania coatings on glass substrates10.1016/j.matchemphys.2010.08.013 ↗
25. Effect of aluminum foam support and polyethylene glycol on surface morphology and photocatalytic behavior of TiO2 films10.1016/j.matchemphys.2014.01.034 ↗
26. Cracking of titania nanocrystalline coatings10.1016/j.jeurceramsoc.2008.02.002 ↗
27. Crack-free nanostructured BaTiO3 thin films prepared by sol–gel dip-coating technique10.1016/j.ceramint.2014.01.078 ↗
28. Crack formation in TiO2 films prepared by sol–gel processing: quantification and characterization10.1016/j.tsf.2006.11.193 ↗
29. The deposition of γ-Al2O3 layers on ceramic and metallic supports for the preparation of structured catalysts10.1016/S0920-5861(01)00383-2 ↗
30. Preparation of structured catalysts with Ni and Ni–Rh/CeO2 catalytic layers for syngas production by biogas reforming processes10.1016/j.cattod.2016.01.037 ↗
31. Stabilized dispersion of nano-ceramic coating
32. Activation of metallic open-cell foams via washcoat deposition of Ni/MgAl2O4 catalysts for steam reforming reaction10.1016/j.cattod.2012.09.003 ↗
33. Photo-electrochemical behavior at different wavelengths of electrochemically obtained TiO2 nanotubes10.1007/s10800-012-0456-7 ↗
34. Effect of the preparation conditions on the performance of TiO2 nanotube arrays obtained by electrochemical oxidation10.1016/j.ijhydene.2011.04.105 ↗
35. Surface-phase junctions of branched TiO2 nanorod arrays for efficient photoelectrochemical water splitting10.1016/j.apcatb.2014.04.032 ↗
36. Appropriate strategies for determining the photoconversion efficiency of water photo electrolysis cells: a review with examples using titania nanotube array photoanodes10.1016/j.solmat.2007.11.006 ↗
37. Efficient photochemical water splitting by a chemically modified n-TiO2 210.1126/science.1075035 ↗
38. Study of the influence of acid etching treatments on the superficial characteristics of Ti10.1590/S1516-14392014005000042 ↗
39. Committee · 2005
40. Influence of etching on structural, optical and photoelectrochemical properties of titanium oxides obtained via thermal oxidation10.1016/j.mssp.2018.04.025 ↗
41. Washcoating of low surface area cerium oxide on complex geometry substrates10.1080/02726351.2015.1058872 ↗
42. Middleman · 1977
43. Entrainment of fluid by the driven plate
44. Effect of ageing time on chemical and rheological evolution in γ-Al2O3 slurries for dip-coating10.1016/j.cattod.2005.06.020 ↗
45. Drying-induced cracks in thin film fabricated from colloidal dispersions10.1080/07373930902820804 ↗
46. Avoiding "mud" cracks during drying of thin films from aqueous colloidal suspensions10.1016/j.jcis.2007.03.076 ↗
47. Consolidation during drying of aggregated suspensions10.1002/aic.690480308 ↗
48. Investigation and optimization of photocurrent transient measurements on nano-TiO210.1007/s10800-012-0485-2 ↗
49. Water splitting by nanocrystalline TiO2 in a complete photoelectrochemical cell exhibits efficiencies limited by charge recombination10.1021/jp909993w ↗
50. Photoeletrochemical generation of hydrogen over carbon-doped TiO2 photoanode10.1016/j.apcatb.2009.07.026 ↗
51. Photoelectrochemical cells with tungsten trioxide/Mo-doped BiVO4 bilayers10.1039/c2cp40991g ↗
52. Visible-light-induced photoelectrochemical behaviors of Fe-modified TiO2 nanotube arrays10.1039/c1nr10282f ↗
53. Enhanced photoelectrochemical response of a composite titania thin film with single-crystalline rutile nanorods embedded in anatase aggregates10.1021/jp8076886 ↗
54. TiO2 nanotubes: self-organized electrochemical formation, properties and applications10.1016/j.cossms.2007.08.004 ↗
55. Titania nanotube supported gold photoanodes for photoelectrochemical cells10.1149/1.3417096 ↗
56. Ta-doped TiO2 nanotubes for enhanced solar-light photoelectrochemical water splitting10.1002/chem.201203544 ↗