Effects of manganese and chromium on sulfide stress cracking in 125 ksi grade high-strength low-alloyed steel for oil country tubular goods
Source abstract
Abstract
Three chromium contents and two manganese contents were investigated through orthogonal experiments concerning 125ksi grade oil casing steels, with their Stress Corrosion Cracking (SSC) behavior analyzed utilizing the NACE-A method. The impact of manganese and chromium on the SSC performance was expounded through a series of experiments encompassing microstructural assessments and hydrogen permeation studies. Mitigating chromium content and regulating manganese content prove to be pivotal in substantially diminishing the quantity of reversible hydrogen traps and Σ3 grain boundaries, the proportion of manganese sulfide (MnS) precipitation is reduced, ultimately fortifying the material's resistance to SSC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms · Engineering Diagnostics and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Research on stress corrosion sensitivity of C110 casing in wellbore protection fluid10.1016/j.egypro.2012.01.131 ↗
2. Effect of microstructure and crystallography on sulfide stress cracking in API-5CT-C110 casing steel10.1016/j.msea.2016.06.034 ↗
3. An experimental study on reshaping C110 deformed casing with spinning casing swage10.1016/j.ngib.2015.07.019 ↗
4. Demand for and deveIopment of Hi—performance OCTG
5. Reserach and development direction of chian oil-well tubular products industry
6. Sulfide stress cracking resistance of newly developed 125 ksi grade high strength low alloy steel 0CTG for mild ly sour environments
7. A new class of 125 ksi SMYS sour service drillpipe offers improved capabilities for drilling in sour gas environments
8. Development of 125ksi grade HSLA steel OCTG for mildly sour environments
9. High strength proprietary low alloy OCTG applicable in severe sour environment
10. Hydrogen-induced crack growth rate in steel plates exposed to sour environments10.5006/1.3290278 ↗
11. Hydrogen electrode reaction and hydrogen embrittlement of mild steel in hydrogen sulfide solutions10.5006/0010-9312-32.8.321 ↗
12. Assessment of sulfide corrosion cracking and hydrogen permeation behavior of ultrafine grain high strength steel10.1016/j.corsci.2022.110142 ↗
13. Composition optimization of high-strength steels for sulfide stress cracking resistance improvement10.1016/j.corsci.2009.08.013 ↗
14. Effect of niobium on sulfide stress cracking behavior of tempered martensitic steel10.1016/j.corsci.2019.108387 ↗
15. On the sulfide stress cracking resistance of a 125 ksi grade high-strength low-alloyed steel for oil country tubular goods10.1016/j.corsci.2022.110781 ↗
16. Effect of crystallographic orientations on the hydrogen-induced cracking resistance improvement of API 5L X70 pipeline steel under various thermomechanical processing10.1016/j.corsci.2016.05.003 ↗
17. Effect of different microstructural parameters on hydrogen induced cracking in an API X70 pipeline steel10.1007/s12540-017-6691-z ↗
18. Development of OCTG Resistant to Sour Environment
19. Nano-Preciptates Design with Hydrogen Trapping Character in High Strength Steel10.1007/978-3-642-17665-4_11 ↗
20. Mitigation of hydrogen embrittlement in ultra-high strength lath martensitic steel via Ta microalloying10.1016/j.matdes.2021.110090 ↗
21. The significant effect of tantalum on the hydrogen-induced cracking of pipeline steel: Morphology, hydrogen permeation, and theoretical studies10.1016/j.corsci.2022.110213 ↗
22. New macrocycles incorporating glycolipids via copper-catalyzed triazole coupling10.1080/07328303.2022.2039685 ↗
23. Modelling and characterisation of Mo2C precipitation and cementite dissolution during tempering of Fe–C–Mo martensitic steel10.1179/026708303225002929 ↗
24. S. Yamasaki, Modelling Precipitation of Carbides in Martensitic Steels, (n.d.).
25. Sulfide stress cracking of high strength modified Cr-Mo steels10.1007/BF02814846 ↗
26. Investigation of structure and properties of low-carbon low-alloyed Cr-Mo pipe steel intended for operating in sour environment10.1063/1.5132158 ↗
27. Microstructural effects on the stress corrosion cracking behavior of medium and high strength steels10.1007/BF02668549 ↗
28. Environmentally assisted cracking and hydrogen diffusion in traditional and high-strength pipeline steels10.1515/corrrev-2015-0051 ↗
29. Roles of Composition and Microstructure in Sulfide Cracking of Steel10.5006/0010-9312-24.9.261 ↗
30. Role of microstructure on sulfide stress cracking of oil and gas pipeline steels10.1007/s11661-003-0128-7 ↗
31. Effects of alloying elements and microstructure on the susceptibility of the welded HSLA steel to hydrogen-induced cracking and sulfide stress cracking10.1016/j.msea.2008.11.064 ↗
32. The impact of grain boundary character distribution on fracture in polycrystals
33. Effects of chromium and tungsten on sulfide stress cracking in high strength low alloy 125 ksi grade casing steel10.1016/j.corsci.2019.108163 ↗
34. EBSD study of hydrogen-induced cracking in API-5L-X46 pipeline steel
35. On the role of crystallographic texture in mitigating hydrogen-induced cracking in pipeline steels10.1016/j.corsci.2011.08.031 ↗
36. Hydrogen resistant ferritic and martensitic steels. part i: the origin of embrittlement
37. Hydrogen absorption of incoherent TiC particles in iron from environment at high temperatures10.1007/s11661-004-0060-5 ↗
38. A classification of hydrogen traps in steel10.1007/BF02812023 ↗
39. The effect of the interface character of TiC particles on hydrogen trapping in steel10.1016/0001-6160(87)90268-9 ↗
40. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes10.1016/j.jmst.2019.03.003 ↗
41. Development of Steels Resistant to Hydrogen Induced Cracking in Wet Hydrogen Sulfide Environment10.2355/isijinternational1966.19.401 ↗
42. J. Ovejero-Garcı́a, Influence of sulphur content and inclusion distribution on the hydrogen induced blister cracking in pressure vessel and pipeline steels10.1016/S0010-938X(00)00084-6 ↗
43. G.M. Waid, R.J. Stiglitz, The Development Of High Strength Casing Steels With Improved Hydrogen Sulfide Cracking Resistance For Sour Service, in: All Days, OTC, Houston, Texas, 1979: p. OTC-3509-MS. https://doi.org/10.4043/3509-MS.10.4043/3509-MS ↗
44. Corrosion
45. Effect of manganese content and microstructure on the susceptibility of X70 pipeline steel to hydrogen cracking10.1016/j.msea.2012.04.076 ↗
46. Aciers spéciaux résistant à la corrosion sous tension par l’hydrogène sulfuré10.1051/metal/195855040301 ↗
47. Stress corrosion cracking of high strength steels due to H2S
48. Cracking of High Strength Steels In Hydrogen Sulfide Solutions10.5006/0010-9312-8.10.342 ↗
49. API SPEC 5CT, Specification for Casing And Tube, ninth ed., API, Washington (DC), 2011 July., (n.d.).
50. Method Meas. Hydrog. Permeat. Determ. Hydrog. uptake Transp. Met. Electrochem. Tech. · 2014 · 2014
51. Quantitative analysis on hydrogen trapping of TiC particles in steel10.1007/s11661-006-0004-3 ↗
52. Dual role of nanosized NbC precipitates in hydrogen embrittlement susceptibility of lath martensitic steel10.1016/j.corsci.2019.108345 ↗
53. Multi-scale and spatially resolved hydrogen mapping in a Ni–Nb model alloy reveals the role of the δ phase in hydrogen embrittlement of alloy 71810.1016/j.actamat.2016.02.053 ↗
54. Direct observation of hydrogen evolution in the electron microscope scale10.1016/0036-9748(82)90377-5 ↗
55. Hydrogen microprint technique in the study of hydrogen in steels10.1007/BF00556094 ↗
56. Application of the hydrogen microprint and the microautoradiography techniques to a duplex stainless steel10.1016/1044-5803(94)00056-Q ↗
57. Improvement of the Hydrogen Microprint Technique on AHSS Steels10.1007/s13632-012-0015-y ↗
58. Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel10.1016/j.ijhydene.2016.09.188 ↗
59. Hydrogen embrittlement behavior at different strain rates in low-carbon martensitic steel
60. Effects of deformation on hydrogen degradation in a duplex stainless steel10.1023/B:JMSC.0000007729.14528.a8 ↗
61. Study of hydrogen release resulting from the transformation of austenite into martensite10.1016/j.msea.2019.03.098 ↗
62. Visualization of hydrogen transport in high strength steels affected by stress fields and hydrogen trapping10.1016/S1359-6462(01)01154-X ↗
63. Analysis of hydrogen behaviour in crack growth tests of γ-TiAl by means of the hydrogen microprint technique10.1016/j.intermet.2003.07.008 ↗
64. Visualization of hydrogen diffusion in a hydrogen-enhanced fatigue crack growth in type 304 stainless steel10.1007/s11661-011-0661-8 ↗
65. Behavior of hydrogen in an Ni3Al compound investigated by means of hydrogen microprint technique10.1016/S0966-9795(99)00166-1 ↗
66. Grain size and grain-boundary effects on diffusion and trapping of hydrogen in pure nickel10.1016/j.actamat.2012.09.004 ↗
67. Effect of microstructural refinement on the toughness of low carbon martensitic steel10.1016/j.scriptamat.2007.10.053 ↗
68. First-principles calculation of the effect of Mn element on the solid solubility of C in α-Fe
69. Metallurgical factors controlling ssc resistance of high-strength, low-alloy steels10.5006/1.3582053 ↗
70. Gustavo lopez turconi, metallurgical design and development of C125 grade for mild sour service application
71. Advances in physical metallurgy and processing of steels. strengthening mechanisms of creep resistant tempered martensitic steel10.2355/isijinternational.41.641 ↗
72. A. Inoue, T. Masumoto, Carbide Reactions (M3C-->M703->M2306->M6C) During Tempering of Rapidly Solidified High Carbon Cr-W and Cr-Mo Steels, (n.d.).
73. High strength-elongation product of Nb-microalloyed low-carbon steel by a novel quenching–partitioning–tempering process10.1016/j.msea.2011.07.008 ↗
74. Quantitative carbide analysis using the Rietveld method for 2.25Cr–1Mo–0.25V steel10.1016/j.matchar.2009.03.009 ↗
75. Assessment of toughness in long term service CrMo low alloy steel by fracture toughness and small punch test10.1016/j.nucengdes.2011.01.031 ↗
76. Effects of hydrogen on the properties of iron and steel10.1007/BF02654700 ↗
77. Role of Mo/V carbides in hydrogen embrittlement of tempered martensitic steel10.1515/corrrev-2015-0052 ↗
78. Hydrogen trapping in an API 5L X60 steel10.1016/j.corsci.2011.09.008 ↗
79. Theoretical evaluation of the role of crystal defects on local equilibrium and effective diffusivity of hydrogen in iron10.1080/02670836.2017.1310417 ↗
80. Delayed fracture properties of 1500 MPa bainite/martensite dual-phase high strength steel and its hydrogen traps10.2355/isijinternational.42.1560 ↗
81. Quantitative investigation on deep hydrogen trapping in tempered martensitic steel10.1016/j.jallcom.2020.157218 ↗
82. A statistical, physical-based, micro-mechanical model of hydrogen-induced intergranular fracture in steel10.1016/j.jmps.2009.10.005 ↗
83. Multi-scale and spatially resolved hydrogen mapping in a Ni–Nb model alloy reveals the role of the δ phase in hydrogen embrittlement of alloy 71810.1016/j.actamat.2016.02.053 ↗
84. Why stainless steel corrodes10.1038/415770a ↗
85. The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusions10.1016/0010-938X(92)90074-D ↗
86. A new microelectrochemical method to study pit initiation on stainless steels10.1016/S0013-4686(70)01783-8 ↗
87. Integral effects of Ca and Sb on the corrosion resistance for the high strength low alloy steel in the tropical marine environment10.1016/j.corsci.2022.110708 ↗
88. Pitting corrosion behavior in advanced high strength steels10.1016/j.jallcom.2014.08.243 ↗
89. Effects of cooling rate and isothermal holding on the characteristics of MnS particles in high-carbon heavy rail steels10.1051/metal/2020002 ↗
90. A systematical analysis with respect to multiple hydrogen traps influencing sulfide stress cracking behavior of API-5CT-C110 casing steel10.1016/j.msea.2018.02.070 ↗
91. Influence of microstructure on hydrogen embrittlement behaviour of 2·25Cr–1 Mo steel10.1179/mst.1994.10.10.908 ↗
92. Effect of Ti, Mo and Cr based precipitates on the hydrogen trapping and embrittlement of Fe–C–X Q&T alloys10.1016/j.ijhydene.2015.06.157 ↗
93. Hydrogen embrittlement of metals10.1016/0025-5416(72)90109-7 ↗
94. Evidence for Dislocation Transport of Hydrogen in Aluminum
95. Investigation of the effect of electrolytic hydrogen charging of X70 steel: II. Microstructural and crystallographic analyses of the formation of hydrogen induced cracks and blisters
96. The role of microstructure and grain orientations on intergranular cracking susceptibility of UNS 17400 martensitic stainless steel10.1016/j.engfailanal.2017.04.008 ↗
97. Texture and grain boundary study in high strength Fe–18Ni–Co steel related to hydrogen embrittlement10.1016/j.matdes.2015.11.093 ↗
98. Role of lattice strain and texture in hydrogen embrittlement of 18Ni (300) maraging steel
99. Effect of quenching temperature on sulfide stress cracking behavior of martensitic steel10.1016/j.msea.2018.03.063 ↗
100. The dual role of coherent twin boundaries in hydrogen embrittlement10.1038/ncomms7164 ↗