Enhancing oxidation resistance of PCS-derived ceramic coatings on titanium alloys by SiC whiskers
Source abstract
Abstract
Polycarbosilane-derived ceramic coatings with superior oxidation resistance enhanced by SiC whisker fillers were prepared on titanium alloys via a dip coating method. The mass gain for coatings with whiskers is −0.22 and 1.725 mg/cm 2 after oxidation at 600 °C and 700 °C for 200 h, respectively, which is lower than the values for coatings without SiC whiskers and in other works. SiC whiskers not only compensate the shrinkage of PCS like particle-shaped fillers, but also inhibit the formation of cracks. In addition, SiC whiskers increase the viscosity of the glass phase and decrease its volatilization, thus improving the oxidation resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review10.1016/j.jallcom.2016.06.212 ↗
2. Research on the microindentation of medical titanium alloy surfaces after shot peening
3. Ablation oxidation and surface quality during laser polishing of TA15 aviation titanium alloy10.1016/j.jmrt.2023.02.209 ↗
4. Research and progress of the hybrid manufacturing of TC4 titanium alloy
5. High-temperature oxidation behaviour of Ti65 titanium alloy fabricated by laser direct energy deposition10.1016/j.corsci.2024.111866 ↗
6. Oxidation behavior of TA15 titanium alloy at high-temperature and the effect on infrared emissivity10.1016/j.jallcom.2024.173707 ↗
7. High-temperature oxidation behavior of TA15 aerospace titanium alloy at 500 ℃ and 800 ℃10.1016/j.jmrt.2024.04.072 ↗
8. Enhanced high temperature oxidation resistance of discontinuous distributed TiBw reinforced TA15 titanium alloy by simple pack10.1016/j.corsci.2023.111073 ↗
9. Skillfully enhanced the oxidation resistance of the traditional TA15 titanium alloy through TiB ceramic phase with network distribution10.1016/j.ceramint.2023.05.065 ↗
10. High-temperature oxidation resistance of ceramic coatings on titanium alloy by micro-arc oxidation in aluminate solution10.1016/j.pnsc.2022.06.001 ↗
11. Role of nitrogen in the high-temperature oxidation of titanium alloys10.1016/j.corsci.2024.112164 ↗
12. Effect of niobium addition on tensile properties and oxidation resistance of a titanium-based alloy10.1016/j.corsci.2020.109198 ↗
13. Effects of Ta and Nb on high-temperature oxidation properties of Ti-6Al-3.5 Sn-4Hf-0.4 Si-X alloys10.1016/j.jallcom.2024.175143 ↗
14. Studies on different oxidation behaviors of TiAlN on titanium alloy and stainless steel under thermal cycling10.1016/j.corsci.2021.109865 ↗
15. Effect of minor Sc modification on the high-temperature oxidation behavior of near- α Ti alloy10.1016/j.corsci.2023.111122 ↗
16. Enhancement of mechanical properties and oxidation resistance of TiAl alloy with addition of Nb and Mo alloying elements10.1016/j.matchemphys.2024.129148 ↗
17. Ablation resistance of SiC-modified nanocomposite ceramic coating prepared by LPDS method on titanium alloy10.1016/j.matchar.2023.113442 ↗
18. Oxidation performance and interfacial reaction behavior of glass-ceramic coating on TiAl alloy with electrodeposited SiO2 interlayer10.1016/j.surfcoat.2021.127495 ↗
19. Improved high-temperature oxidation resistance of TC4 alloy by electrodeposited SiO2 coating10.1016/j.corcom.2021.10.002 ↗
20. Improvement of steam oxidation resistance of the γ-TiAl alloy with microarc oxidation coatings at 900-1200 ℃10.1016/j.corsci.2022.110711 ↗
21. Development of rGO doped alumina-based wear and corrosion resistant ceramic coatings on steel using HVOF thermal spray10.1016/j.ceramint.2023.02.124 ↗
22. Microstructures evolution, corrosion and oxidation mechanisms of EB-PVD thermal barrier coatings exposed to molten salt corrosion10.1016/j.jeurceramsoc.2024.02.009 ↗
23. Hoop tensile properties of SiC fiber-reinforced SiC matrix composite tubes with/without CVD-SiC coating10.1016/j.jeurceramsoc.2024.116707 ↗
24. Atomic simulation and experimental: Oxidation protective SiC coating produced by chemical vapor deposition and pack cementation for carbon/ carbon composites
25. Polymeric and ceramic silicon-based coatings–a review10.1039/C8TA09054H ↗
26. Generation of protective ceramic coatings on magnesium by laser treatment of Al2O3/ZrO2 filled organosilazane10.1016/j.jeurceramsoc.2024.04.054 ↗
27. Excellent oxidation behavior of the spin-coated SiCO layers on the austenitic steel10.1016/j.apsusc.2022.156097 ↗
28. Improving the high temperature oxidation resistance of TiAl alloy by SiOC coating10.1016/j.jmrt.2023.10.174 ↗
29. Synthesis and characterization of yttrium and ytterbium silicates from their oxides and an oligosilazane by the PDC route for coating applications to protect Si3N4 in hot gas environments10.1016/j.jeurceramsoc.2017.04.034 ↗
30. Laser and furnace pyrolyzed organosilazane-based glass/ZrO2 composite coating system-A comparison10.1016/j.jeurceramsoc.2019.10.040 ↗
31. Advanced ceramic coatings on aluminum by laser treatment of filled organosilazane-based composites10.1016/j.ceramint.2022.04.314 ↗
32. The effects of adding nano-alumina filler on the properties of polymer-derived SiC coating10.1111/ijac.13828 ↗
33. A novel approach to develop composite ceramics based on active filler loaded precursor employing plasma assisted pyrolysis10.1016/j.matdes.2015.10.057 ↗
34. hermal shock behavior and high-temperature oxidation performance of PDC-based environmental barrier coatings on AISI 441 stainless steel10.1016/j.surfcoat.2023.130074 ↗
35. An anti-oxidative coating made from particle-filled SiCN precursor for applications up to 800 °C10.1016/j.jallcom.2022.165236 ↗
36. Effect of SiC whiskers on thermal cycling performance of YSZ-Based sealing coating10.1016/j.ceramint.2021.11.188 ↗
37. Thermal cycling behavior and oxidation resistance of SiC whisker-toughened-mullite/SiC coated carbon/carbon composites in burner rig tests10.1016/j.corsci.2016.02.003 ↗
38. Improved oxidation and thermal shock resistance of SiC-Si coating with a SiCw/PyC network structure toughened buffer layer10.1016/j.surfcoat.2024.130522 ↗
39. Characterisation of novel precursor-derived ceramic coatings with glass filler particles on steel substrates10.1016/j.surfcoat.2012.07.013 ↗
40. Interfacial modification and oxidation resistance behavior of a CVD-SiC coating for C/SiC composites10.1016/j.ceramint.2023.09.011 ↗
41. The fate and role of in situ formed carbon in polymer-derived ceramics10.1016/j.pmatsci.2019.100623 ↗
42. Effect of laser shock processing on oxidation resistance of laser additive manufactured Ti6Al4V titanium alloy10.1016/j.corsci.2020.108655 ↗
43. High vacuum arc ion plating TiAl coatings for protecting titanium alloy against oxidation at medium high temperatures10.1016/j.corsci.2016.07.005 ↗
44. Effect of Y2 O3 on microstructure and properties of CoCrFeNiTiNb high entropy alloy coating on Tie6Ale4V surface by laser cladding10.1016/j.jre.2023.02.015 ↗
45. Cyclic oxidation behavior and oxide scale adhesion of Al/NiCrAlY coating on pure titanium alloy10.1016/j.jallcom.2017.09.199 ↗
46. Lightweight refractory high entropy alloy coating by laser cladding on Ti–6Al–4V surface10.1016/j.vacuum.2020.109823 ↗
47. Effect of Ti content on wear and high-temperature oxidation resistances of laser-clad CoCrMoNbTix high-entropy alloy coatings10.1016/j.matlet.2023.134490 ↗
48. A low-temperature prepared composite coating to protect SiC-coated C/C composites against oxidation in a wide temperature range for long-life service10.1016/j.jeurceramsoc.2023.03.037 ↗
49. An oxidation protective coating prepared by SiC densifying HfB2-SiC skeleton for SiC-coated C/C composites at 1473, 1773, and 1973 K10.1016/j.corsci.2022.110559 ↗
50. High-temperature oxidation resistance of spent MoSi2 modified ZrB2–SiC–MoSi2 coatings prepared by spark plasma sintering10.1016/j.ceramint.2023.07.265 ↗
51. Effect of phase composition on the oxidation resistance of ZrB2-SiC coatings10.1016/j.jeurceramsoc.2022.01.020 ↗
52. Enhanced oxidation resistance of ZrB2-MoSi2 coating through MoSi2-TaSi2 double-silicide alloying modifying10.1016/j.corsci.2024.112070 ↗
53. High-temperature oxidation behavior of Cu-Fe-based immiscible alloy produced by laser powder bed fusion10.1016/j.corsci.2023.111637 ↗
54. Study on the oxidation behavior of a novel thermal barrier coating system using the nanocrystalline coating as bonding coating on the single-crystal superalloy10.1016/j.corsci.2023.111591 ↗
55. Influence of temperature, oxygen partial pressure, and microstructure on the high-temperature oxidation behavior of the SiC Layer of TRISO particles10.1016/j.jeurceramsoc.2024.116913 ↗