Evolution of wetted and corroded areas on 8Cr4Mo4V bearing steel exposed to salt water contaminated lubricant oil
Source abstract
Abstract
Relationship between wetted and corroded areas on 8Cr4Mo4V bearing steel during exposure to salt water contaminated lubricant oil was explored by Monte Carlo simulation and corrosion experiment. Results show that locally corroded areas are initially scattered then connected and eventually merged due to droplet coalescence, and are resulted from galvanic, uniform and filiform corrosions, respectively. Droplet coalescence also redistributes wetted areas and activates de-wetting which interrupts transformation towards corrosion. Role of droplet coalescence in evolution of corroded areas is addressed. Combining two Monte Carlo models varied with droplet relaxation helps to predict the corroded areas` distribution after long-term exposure.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Failure analysis of an aero-engine inter-shaft bearing due to clearance between the outer ring and its housing10.1016/j.engfailanal.2023.107298 ↗
2. Study on surface fatigue and metamorphic layer of raceway of hybrid ceramic ball bearing in high-speed spindle for machine tool10.1016/j.engfailanal.2022.106928 ↗
3. An investigation into various failure criteria on rolling contact fatigue through an improved probabilistic model10.1016/j.triboint.2023.108875 ↗
4. A continuum damage mechanics finite element model for investigating effects of surface roughness on rolling contact fatigue10.1016/j.ijfatigue.2020.105986 ↗
5. An approach for predicting failure mechanism in rough surface rolling contact fatigue Tribol
6. Rolling bearing applications: some trends in materials and heat treatments10.1179/1743284711Y.0000000066 ↗
7. A systematic review on failure modes and proposed methodology to artificially seed faults for promoting PHM studies in laboratory environment for an industrial gearbox10.1016/j.engfailanal.2023.107076 ↗
8. Corrosion initiation and propagation on carburized martensitic stainless steel surfaces studied via advanced scanning probe microscopy10.3390/ma12060940 ↗
9. Corrosion assessment and characterization of aerospace-bearing steels in seawater and ester-based lubricants10.5006/0459 ↗
10. Surface-chemical aspects of the rusting of steel surfaces in oil containing an entrained aqueous phase10.1016/0010-938X(69)90023-7 ↗
11. Macrostructure, microstructure and mechanical properties evolution during 8Cr4Mo4V steel roller bearing inner ring forging process10.1016/j.msea.2020.140196 ↗
12. Steels for bearings10.1016/j.pmatsci.2011.06.002 ↗
13. Thermal-induced surface damage of M50 steel at rolling-sliding contacts10.1016/j.wear.2018.12.091 ↗
14. Improving the tribological properties of AISI M50 steel using Sns/Zno solid lubricants10.1016/j.jallcom.2019.153494 ↗
15. Microstructure and corrosion behavior of Cr coating on M50 steel fabricated by electrospark deposition10.1007/s11665-019-04148-2 ↗
16. Microstructure modifications and corrosion behaviors of Cr4Mo4V steel treated by high current pulsed electron beam10.1016/j.matchemphys.2010.12.016 ↗
17. Influence of irradiation number of high current pulsed electron beam on the structure and properties of M50 steel10.1016/j.nimb.2010.04.019 ↗
18. Improvement of the corrosion property of Cr4Mo4V bearing steel using plasma immersion ion implantation10.1016/S0168-583X(97)00047-5 ↗
19. Artificial Intelligence and fourier-transform infrared spectroscopy for evaluating water-mediated degradation of lubricant oils10.1016/j.talanta.2020.121312 ↗
20. Groysman · 2014
21. Sustainability of water in diesel emulsion fuel: an assessment of its corrosion behavior towards copper10.1016/j.jclepro.2019.02.210 ↗
22. Review on modelling of corrosion under droplet electrolyte for predicting atmospheric corrosion rate10.1016/j.jmst.2020.04.061 ↗
23. Predicting the effect of droplet geometry and size distribution on atmospheric corrosion10.1016/j.corsci.2022.110308 ↗
24. Oil-immersed scanning micropipette contact method enabling long-term corrosion mapping10.1021/acs.analchem.0c02177 ↗
25. A new corrosion mechanism for X100 pipeline steel under oil-covered chloride droplets10.5006/2804 ↗
26. Droplet size dependent localized corrosion evolution of M50 bearing steel in salt water contaminated lubricant oil10.1016/j.corsci.2022.110620 ↗
27. The toxicity of commercial jet oils10.1006/enrs.2002.4346 ↗
28. Identification and source attribution of organic compounds10.5194/acp-21-3763-2021 ↗
29. Identification of jet lubrication oil as a major component of aircraft exhaust nanoparticles10.5194/acp-19-6389-2019 ↗
30. A.J. Neer, J.R. Andress, R.L. Haney, R.A. Overfelt, B.C. Prorok, J.W. Fergus, L.C. Mathison, Preliminary Investigation into Thermal Degradation Behavior of Mobil Jet Oil II, 41st International Conference on Environmental Systems, Portland, USA, (2011).10.2514/6.2011-5110 ↗
31. Research on testing method of oil characteristic based on quartz tuning fork sensor10.3390/app11125642 ↗
32. The growth of the passive film on iron in 0.05 M NaOH studied in situ by Raman micro-spectroscopy and electrochemical polarization. Part I: near-resonance enhancement of the Raman spectra of iron oxide and oxyhydroxide compounds10.1002/jrs.2837 ↗
33. In-situ Raman and X-ray photoelectron spectroscopic studies on the pitting corrosion of modified 9Cr-1Mo steel in neutral chloride solution10.1016/j.apsusc.2017.09.179 ↗
34. Transformation behavior of primary MC and M2C carbides in Cr4Mo4V steel10.1016/j.jallcom.2021.161755 ↗
35. Carbides in M-50 high speed steel, Metall10.1007/BF02917552 ↗
36. Formation mechanism of MC and M2C primary carbides in as-cast M50 bearing steel10.1016/j.matchar.2021.111011 ↗
37. Evolution of microstructure and mechanical properties during tempering of M50 steel with Bainite/Martensite duplex structure10.1016/j.jmrt.2020.04.075 ↗
38. Corrosion performance of HVOF and APS thermally sprayed NiTi intermetallic coatings in 3.5% NaCl solution.10.1016/j.corsci.2009.11.034 ↗
39. SEM, EDS, EPMA-WDS and EBSD characterization of carbides in HP type heat resistant alloys10.1016/j.matchar.2008.02.001 ↗
40. Emulsions of water in asphaltene-containing oils 1. Droplet size distribution and emulsification rates10.1016/0166-6622(88)80006-4 ↗
41. Feasibility of least-square support vector machine in predicting the effects of shear rate on the rheological properties and pumping power of MWCNT-MgO/oil hybrid nanofluid based on experimental data10.1007/s10973-020-09279-6 ↗
42. Y.J. Dai, Boundary lubrication behavior and mechanism analysis of oil-water emulsion10.3901/JME.2019.09.048 ↗
43. Churning power losses of a gearbox with spiral bevel geared transmission10.1016/j.triboint.2018.08.041 ↗
44. The viscosity of a fluid containing small drops of another fluid
45. A mechanism for non-Newtonian flow in suspensions of rigid spheres10.1122/1.548848 ↗
46. Differential multiphase models for polydispersed suspensions and particulate solids10.1016/S0377-0257(97)90002-1 ↗
47. Viscosity of water-in-oil emulsions: Variation with temperature and water volume fraction10.1016/j.petrol.2005.06.014 ↗
48. Effect of salinity on water-in-crude oil emulsion: evaluation through drop-size distribution proxy10.1021/ef101236h ↗
49. Effect of velocity, solid wettability, and temperature on drainage dynamics of C5PeC11-in-toluene liquid films between silica and water droplet10.1021/acs.energyfuels.0c00395 ↗
50. Effect of approach velocity on thin liquid film drainage between an air bubble and a flat solid surface10.1021/acs.jpcc.6b11502 ↗
51. Model and experiments of a drop impinging on an immersed wall10.1063/1.1331313 ↗
52. Spontaneous process of dispersed salt water droplets in lubricant oil establishing wetted areas: settling, spreading, coalescing and de-wetting10.1016/j.colsurfa.2024.134368 ↗
53. Sequential Monte Carlo10.1017/S0305004100036227 ↗
54. A method for assessing environmental risks of oil-mineral-aggregate to benthic organisms10.1080/10807039.2010.501240 ↗
55. M. Castier, O.D. Cuéllar, F.W. Tavares, 1998, Monte Carlo simulation of particle segregation, 97 (1998) 200-207..10.1016/S0032-5910(98)00009-6 ↗
56. Migration of emulsified water droplets in petroleum sludge during centrifugation10.1021/ef5008837 ↗
57. Simulation studies of phase inversion in agitated vessels using a Monte Carlo Technique10.1006/jcis.2001.8159 ↗
58. Hydrodynamic forces involving deformable interfaces at nanometer separations10.1063/1.2839577 ↗
59. Contact line dynamics in drop coalescence and spreading10.1021/la034991g ↗
60. Wetting: statics and dynamics10.1103/RevModPhys.57.827 ↗
61. A quasi-Monte Carlo based flocculation model for fine-grained cohesive sediments in aquatic environments10.1016/j.watres.2021.116953 ↗
62. The comparison of the corrosion of ultrapure iron and low-carbon steel under NaCl-electrolyte droplets10.1016/j.corsci.2016.03.005 ↗
63. High-throughput assessment of corrosion inhibitor mixtures on carbon steel via droplet microarray10.1016/j.corsci.2023.110967 ↗
64. Fungi corrosion of high-strength aluminum alloys with different microstructures caused by marine Aspergillus terreus under seawater drop10.1016/j.corsci.2023.110960 ↗
65. Corrosion behavior of AA6016/SM490 galvanic couple in NaCl-containing droplets: effect of Fe species on galvanic corrosion acceleration10.1016/j.corsci.2023.111190 ↗
66. Influence of the secondary phase on micro galvanic corrosion of low carbon bainitic steel in NaCl solution10.1016/j.matchar.2018.03.021 ↗
67. Effects of secondary-phase formation on the electrochemical performance of a wire arc additive manufactured 420 martensitic stainless steel under different heat treatment conditions10.1007/s11665-021-05936-5 ↗
68. Electrochemical and in-situ SERS study of passive film characteristics and corrosion performance of 9%Cr microcomposite steel in highly alkaline environments
69. Corrosion behaviour of a quenched and partitioned medium carbon steel in 3.5 wt% NaCl solution10.1016/j.corsci.2017.10.027 ↗
70. Partial FeO-Fe3O4 phase transition along the <111> direction of the cubic crystalline structure in iron oxide nanocrystals
71. Raman microspectroscopy of some iron oxides and oxyhydroxides10.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.0.CO;2-B ↗
72. XRD, SEM/EDX and micro-Raman spectroscopy for mineralogical and chemical characterization of iron slags from the Roman archaeological site of Forua (Biscay, North Spain)10.1016/j.microc.2018.01.020 ↗
73. Influence of inclusions on early corrosion development of ultra-low carbon bainitic steel in NaCl Solution10.5006/1837 ↗
74. Synergistic effect of Al2O3 inclusion and pearlite on the localized corrosion evolution process of carbon steel in marine environment10.3390/ma11112277 ↗
75. Influences of thermomechanical conditions on corrosion behavior of low-carbon steels in artificial seawater10.20964/2019.03.65 ↗
76. Bardal · 2007
77. A comparative study of localized corrosion and stress corrosion cracking of 13Cr martensitic stainless steel using acoustic emission and X-ray computed tomography10.3390/ma12162569 ↗
78. Atmospheric corrosion initiation on steel from predeposited NaCl salt particles in high humidity atmospheres10.1179/147842209X12476568584296 ↗
79. The effect of oxygen partial pressure on the filiform corrosion of organic coated iron10.1016/j.corsci.2014.08.004 ↗
80. In situ studies of filiform corrosion of iron10.1149/1.1645263 ↗