Experimental and crystal plasticity study on hydrogen-assisted fatigue crack growth behavior of IN625 superalloy
Source abstract
Abstract
The fatigue crack growth (FCG) behavior of IN625 alloy was studied by experimental methods and crystal plasticity simulations. Based on the experimental FCG rate curves, it is evident that hydrogen significantly accelerates FCG, and calculations show that this acceleration factor reaches a maximum of 2.41 times at 1 Hz. Hydrogen results in smaller plastic deformation zones compared to hydrogen-free samples. The interaction between hydrogen and dislocations leads to the nucleation of micro-voids along the slip planes, promoting the hydrogen-assisted cracking process. Lower loading frequencies results in finer fatigue striations and more pronounced hydrogen embrittlement features on the fracture surface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (96)
Show source-provided references
1. Net-zero emissions energy systems10.1126/science.aas9793 ↗
2. Public awareness of hydrogen energy: a comprehensive evaluation based on statistical approach10.1016/j.ijhydene.2022.12.070 ↗
3. Hydrogen: synthetic fuel of the future10.1126/science.178.4063.849 ↗
4. Evaluation of hydrogen diffusion and trapping in nickel Alloy 625 by thermal desorption spectroscopy10.1016/j.ijhydene.2022.07.094 ↗
5. Hydrogen diffusion and trapping in nickel-based alloy 625: An electrochemical permeation study10.1016/j.electacta.2022.140477 ↗
6. Hydrogen-Assisted Failure of Alloy X-750 and 625 Under Slow Strain-Rate conditions
7. Comparison of internal hydrogen embrittlement of superalloys 718 and 62510.7449/1991/Superalloys_1991_635_651 ↗
8. Hydrogen-enhanced cracking of superalloys10.1007/BF02660868 ↗
9. Hydrogen assisted crack initiation and propagation in a nickel-based superalloy10.1016/j.actamat.2016.05.003 ↗
10. J.A. Lee, S. Woods, Hydrogen embrittlement. (2016). https://ntrs.nasa.gov/citations/20160005654.
11. P.D. Ordin, Safety standard for hydrogen and hydrogen systems. (1997). https://ntrs.nasa.gov/citations/19970033338.
12. Hydrogen-induced degradation behavior of nickel alloy studied using acoustic emission technique10.1016/j.msea.2023.144635 ↗
13. Characterising hydrogen induced cracking of alloy 625+ using correlative SEM - EDX and NanoSIMS10.1016/j.corsci.2020.109228 ↗
14. Distinct evidence of hydrogen-enhanced defect formation on pre-strained nickel alloy 625 during in situ electrochemical nanoindentation test10.3390/met14020161 ↗
15. Hydrogen-assisted fatigue crack-propagation in a Ni-based superalloy 718, revealed via crack-path crystallography and deformation microstructures10.1016/j.corsci.2020.108814 ↗
16. Controlling factors and mechanisms of fatigue crack growth influenced by high pressure of gaseous hydrogen in a commercially pure iron10.1016/j.tafmec.2020.102885 ↗
17. Effects of hydrogen on fatigue crack growth behavior of austenitic stainless steels10.1016/j.ijhydene.2008.02.067 ↗
18. Effect of hydrogen on fatigue crack growth of metals10.1016/j.engfracmech.2010.04.012 ↗
19. Multi-scale observation of hydrogen-induced, localized plastic deformation in fatigue-crack propagation in a pure iron10.1016/j.scriptamat.2017.06.037 ↗
20. Interpretation of hydrogen-assisted fatigue crack propagation in BCC iron based on dislocation structure evolution around the crack wake10.1016/j.actamat.2018.06.041 ↗
21. The role of intergranular fracture on hydrogen-assisted fatigue crack propagation in pure iron at a low stress intensity range10.1016/j.msea.2018.07.014 ↗
22. Hydrogen-affected fatigue crack propagation at various loading frequencies and gaseous hydrogen pressures in commercially pure iron10.1016/j.ijfatigue.2018.12.009 ↗
23. Hydrogen-assisted, intergranular, fatigue crack-growth in ferritic iron: Influences of hydrogen-gas pressure and temperature variation10.1016/j.ijfatigue.2020.105806 ↗
24. A mechanism behind hydrogen-assisted fatigue crack growth in ferrite-pearlite steel focusing on its behavior in gaseous environment at elevated temperature10.1016/j.corsci.2020.108558 ↗
25. Fatigue crack threshold and crack growth behavior of 17–4 PH steel determined with internal hydrogen10.1016/j.engfracmech.2022.108882 ↗
26. The difference in fatigue crack growth induced by internal and external hydrogen in selective laser melted 304L stainless steel10.1016/j.ijfatigue.2022.107052 ↗
27. Hydrogen-assisted fatigue crack growth: pre-charging vs in-situ testing in gaseous environments10.1016/j.msea.2023.144885 ↗
28. Effects of hydrogen pressure on hydrogen-assisted fatigue crack growth of Cr-Mo steel10.1016/j.tafmec.2023.104202 ↗
29. Modeling the fatigue crack growth of X100 pipeline steel in gaseous hydrogen10.1016/j.ijfatigue.2013.08.010 ↗
30. Antagonistic fatigue crack acceleration/deceleration phenomena in Ni-based superalloy 718 under hydrogen-supply10.1038/s41598-023-33761-4 ↗
31. Effects of hydrogen and load frequency on the fatigue crack propagation behavior of selective laser melted Inconel 718 alloy10.1016/j.ijfatigue.2022.106848 ↗
32. Hydrogen-assisted fatigue crack propagation behavior of selective laser–melted Inconel 718 alloy10.1016/j.corsci.2023.111745 ↗
33. One-way coupled crystal plasticity-hydrogen diffusion simulation on artificial microstructure10.1299/jcst.4.105 ↗
34. Simulation of hydrogen diffusion affected by stress-strain heterogeneity in polycrystalline stainless steel10.1016/j.ijhydene.2013.11.065 ↗
35. Progressive modelling and experimentation of hydrogen diffusion and precipitation in anisotropic polycrystals10.1016/j.ijplas.2018.12.005 ↗
36. Quantifying hydrogen concentration in the vicinity of zirconium hydrides and deformation twins10.1016/j.jmps.2020.104287 ↗
37. On the effects of texture and microstructure on hydrogen transport towards notch tips: a CPFE study10.1016/j.ijplas.2022.103234 ↗
38. Key role of plastic strain gradient in hydrogen transport in polycrystalline materials10.1016/j.ijplas.2022.103409 ↗
39. A hydrogen diffusion model considering grain boundary characters based on crystal plasticity framework10.1016/j.ijplas.2023.103740 ↗
40. Serrated flow behavior and microstructure evolution of Inconel 625 superalloy during plane-strain compression with different strain rates10.1016/j.jallcom.2021.160648 ↗
41. Influence of heat treatment on Inconel 625 superalloy sheet: carbides, γ'', δ phase precipitation and tensile deformation behavior10.1016/j.jallcom.2022.167522 ↗
42. ASTM, E647-08-1 · 2010
43. GB/T 228 · 2021
44. Hydrogen embrittlement in nickel-based superalloy 718: relationship between γ′ + γ″ precipitation and the fracture mode10.1016/j.ijhydene.2015.07.053 ↗
45. Tensile mechanical properties and fracture behaviors of nickel-based superalloy 718 in the presence of hydrogen10.1016/j.ijhydene.2018.08.179 ↗
46. Hydrogen-assisted failure of laser melting additive manufactured IN718 superalloy10.1016/j.corsci.2019.108171 ↗
47. Finite-strain elastic—plastic theory with application to plane-wave analysis10.1063/1.1708953 ↗
48. Crystal Plasticity Finite Element Methods
49. Bounds and self-consistent estimates for creep of polycrystalline materials
50. Latent hardening in copper and aluminium single crystals10.1016/0001-6160(80)90162-5 ↗
51. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
52. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
53. Slip line length of copper single crystals oriented along [100] and [111]10.1016/0036-9748(78)90118-7 ↗
54. Modeling dislocation storage rates and mean free paths in face-centered cubic crystals10.1016/j.actamat.2008.08.012 ↗
55. Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals10.1016/j.pmatsci.2011.01.006 ↗
56. A comparison of dislocation induced back stress formulations in strain gradient crystal plasticity10.1016/j.ijsolstr.2006.05.011 ↗
57. The influence of hydrogen on the plastic deformation ductility, and fracture of nickel in tension10.1016/0001-6160(63)90209-8 ↗
58. Effect of cathodic charging on the mechanical properties of aluminum10.1007/BF02645053 ↗
59. Hydrogen effects on the tensile properties of 21-6-9 stainless steel10.1007/BF02645950 ↗
60. Numerical analysis of hydrogen transport near a blunting crack tip10.1016/0022-5096(89)90002-1 ↗
61. Measuring simulated hydrogen diffusion in symmetric tilt nickel grain boundaries and examining the relevance of the Borisov relationship for individual boundary diffusion10.1016/j.actamat.2021.116882 ↗
62. The diffusion and trapping of hydrogen in steel10.1016/0001-6160(70)90078-7 ↗
63. Coupled hydrogen diffusion simulation using a heat transfer analogy10.1016/j.ijmecsci.2016.07.020 ↗
64. Mehrer · 2007
65. Hydrogen-prompted heterogeneous development of dislocation structure in Ni10.1016/j.actamat.2022.118660 ↗
66. The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion10.1016/j.engfracmech.2019.106528 ↗
67. Hydrogen-assisted intergranular fatigue crack initiation in metals: role of grain boundaries and triple junctions10.1016/j.ijhydene.2023.01.104 ↗
68. Modelling of hydrogen-assisted damage at the deforming single crystal crack-tip10.1016/j.mechmat.2023.104557 ↗
69. 31 - Subsea Pipelines
70. Investigation of strain hardening near grain boundaries of an aluminum oligocrystal: experiments and crystal based finite element method10.1016/j.ijplas.2020.102898 ↗
71. On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling – Theory, experiments, and simulations10.1016/j.actamat.2006.01.004 ↗
72. Crystal plasticity parameter identification with 3D measurements and Integrated Digital Image Correlation10.1016/j.actamat.2016.06.039 ↗
73. Multi-scale simulation of nanoindentation on cast Inconel 718 and NbC precipitate for mechanical properties prediction10.1016/j.msea.2016.03.081 ↗
74. Crystal plasticity framework related to size effect: From single crystal parameters to polycrystalline mechanical properties10.1016/j.msea.2024.146747 ↗
75. Modeling hydrogen transport by dislocations10.1016/j.jmps.2015.03.002 ↗
76. K.B. Broberg, 3 - Basic Relations in Crack Mechanics, in: K.B. Broberg (Ed.), Cracks and Fracture, Academic Press, San Diego, 1999, pp. 45-98.10.1016/B978-012134130-5/50004-0 ↗
77. K.B. Broberg, 8 - Physical and Engineering Aspects of Fracture, in: K.B. Broberg (Ed.), Cracks and Fracture, Academic Press, San Diego, 1999, pp. 544-623.10.1016/B978-012134130-5/50009-X ↗
78. G.R. Irwin, "Fracture Mechanics". Structural Mechanics, J. N. Goodier and N. J. Hoff (Eds). Pergamon Press, pp. 557-594, 1960.
79. Influence of crack tip constraint on void growth in ductile FCC single crystals10.1016/j.msea.2010.08.076 ↗
80. Effect of constraint and latent hardening ratio on the plastic flow around a crack tip in a hardening FCC single crystal10.1016/j.ijplas.2018.11.012 ↗
81. A numerical study of crack tip constraint in ductile single crystals10.1016/j.jmps.2008.01.002 ↗
82. Analysis of the influence of microstructural traps on hydrogen assisted fatigue10.1016/j.actamat.2020.08.030 ↗
83. C.San Marchi, B.P. Somerday, Technical reference for hydrogen compatibility of materials, Sandia Report, SAND2012-7321, Sandia National Laboratories, September 2012.10.2172/1055634 ↗
84. Hydrogen diffusion and solution at high temperatures in 316L stainless steel and nickel-base heat-resistant alloys10.1016/0022-3115(85)90056-X ↗
85. Permeability, solubility and diffusivity of hydrogen isotopes in stainless steels at high gas pressures10.1016/j.ijhydene.2006.05.008 ↗
86. Hydrogen distribution of hydrogen-charged nickel analyzed via hardness test and secondary ion mass spectrometry10.1016/j.ijhydene.2020.01.117 ↗
87. Experimental and simulation analysis of residual topography dominated deformation mechanism of nanoindentation: a case study of Inconel 625 superalloy10.1016/j.jmrt.2021.05.054 ↗
88. A dislocation-based flow rule with succinct power-law form suitable for crystal plasticity finite element simulations10.1016/j.ijplas.2020.102921 ↗
89. Finite element analysis of the free surface effects on the mechanical behavior of thin nickel polycrystals10.1016/j.ijplas.2011.08.007 ↗
90. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
91. Grain coarsening behaviour of solution annealed Alloy 625 between 600–800 °C10.1016/j.msea.2016.11.060 ↗
92. Precipitation behavior of Alloy 625 and Alloy 625 plus10.1016/j.jallcom.2019.151916 ↗
93. Hydrogen-accelerated fatigue crack growth of equiatomic Fe–Cr–Ni–Mn–Co high-entropy alloy evaluated by compact tension testing10.1016/j.msea.2022.143394 ↗
94. Hydrogen-enhanced fatigue crack growth in a single-edge notched tensile specimen under in-situ hydrogen charging inside an environmental scanning electron microscope10.1016/j.actamat.2019.03.032 ↗
95. The diffusion and trapping of hydrogen along the grain boundaries in polycrystalline nickel10.1016/j.scriptamat.2011.09.036 ↗
96. Hydrogen diffusion behavior within microstructures near crack tip: a crystal plasticity study10.1016/j.mechmat.2024.105032 ↗