Corrosion mechanism of press-hardened steel with zinc coating in controlled atmospheric conditions: A laboratory investigation
Source abstract
Abstract
The formation and evolution of corrosion products on zinc galvanized press-hardened steel during various atmospheric tests were studied. A high protective ability of the coating containing Zn-Fe intermetallics was shown. The composition models of the soluble and stable corrosion products were calculated. A significant effect of barrier corrosion products on corrosion resistance, especially simonkolleite, hydrozincite and dawsonite, was demonstrated. Exposure to constant high relative humidity resulted in the largest mass loss due to the accelerated formation of akaganeite. On the contrary, the presence of sulphates caused formation of additional barrier corrosion products and almost a threefold drop in mass loss.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Review on hydrogen embrittlement of press-hardened steels for automotive applications10.1007/s40195-022-01408-4 ↗
2. Corrosion of press-hardened galvanized steel10.1016/j.corsci.2012.04.048 ↗
3. High strength steel sheets for weight reduction of automotives
4. Corrosion challenges towards a sustainable society10.1002/maco.202213140 ↗
5. Cracking and interfacial debonding of the Al–Si coating in hot stamping of pre-coated boron steel10.1016/j.apsusc.2014.08.043 ↗
6. Effects of hydrogen pressure and prior austenite grain size on the hydrogen embrittlement characteristics of a press-hardened martensitic steel10.1016/j.ijhydene.2021.05.005 ↗
7. Overview on coatings developed on press hardened steels for automotive applications
8. Corrosion resistance of different metallic coatings on press-hardened steels for automotive10.1002/srin.201000291 ↗
9. Phase transformation temperatures and Fe enrichment of a 22MnB5 Zn-Fe coated steel under hot stamping conditions10.1016/j.jmrt.2019.11.003 ↗
10. Surface and coating analysis of press-hardened hot-dip galvanized steel sheet10.1002/srin.201200068 ↗
11. Diffusion and cracking behavior involved in hot press forming of Zn coated 22MnB510.1016/j.jallcom.2019.07.232 ↗
12. Zinc coatings for hot sheet metal forming: comparison of phase evolution and microstructure during heat treatment10.1016/j.surfcoat.2011.03.002 ↗
13. The metallurgy of zinc-coated steel10.1016/S0079-6425(98)00006-1 ↗
14. Surface oxide formation during rapid heating of Zn-coated press hardening steel10.2355/isijinternational.54.2364 ↗
15. Effects of alloying elements on surface oxides of hot–dip galvanized press hardened steel10.1016/j.surfcoat.2020.126466 ↗
16. Understanding corrosion via corrosion product characterization: I. Case study of the role of Mg alloying in Zn–Mg coating on steel10.1016/j.corsci.2009.03.005 ↗
17. Effect of cations on corrosion of zinc and carbon steel covered with chloride deposits under atmospheric conditions10.1016/j.corsci.2006.11.004 ↗
18. Atmospheric corrosion of zinc induced by runoff10.1016/j.corsci.2009.05.030 ↗
19. Corrosion behavior of field-exposed zinc in a tropical marine atmosphere10.5006/1177 ↗
20. Corrosion performance of Zn–Al–Mg coatings in open and confined zones in conditions simulating automotive applications10.1002/maco.200905425 ↗
21. In situ studies of the corrosion during drying of confined zinc surfaces10.1002/maco.200604029 ↗
22. Formation of corrosion products on open and confined zinc surfaces exposed to periodic wet/dry conditions10.5006/1.3280514 ↗
23. Formation of corrosion products on zinc in wet supercritical and subcritical CO2: in-situ spectroscopic study10.1016/j.corsci.2020.108850 ↗
24. Corrosion inhibition by zinc corrosion products on zinc-coated steel10.1149/05047.0027ecst ↗
25. Atmospheric corrosion of zinc in coastal atmospheres10.1002/maco.201810620 ↗
26. Corrosion mechanism of model zinc–magnesium alloys in atmospheric conditions10.1016/j.corsci.2008.06.008 ↗
27. Corrosion resistance of zinc–magnesium coated steel10.1016/j.corsci.2007.03.032 ↗
28. Composition of corrosion products formed on Zn–Mg, Zn–Al and Zn–Al–Mg coatings in model atmospheric conditions10.1016/j.corsci.2014.05.016 ↗
29. Atmospheric corrosion of zinc-aluminum alloyed coated steel in depleted carbon dioxide environments10.1149/2.0721807jes ↗
30. Effect of corrosion products on the atmospheric corrosion of electrodeposited zinc and zinc alloy coatings10.5006/1.3280562 ↗
31. Characterization of the corrosion behaviour of Zn and Zn alloy electrodeposits: atmospheric and accelerated tests10.1016/S0010-938X(97)00144-3 ↗
32. Long-term atmospheric corrosion properties of thermally sprayed Zn, Al and Zn–Al coatings exposed in a coastal area10.1016/j.corsci.2013.05.021 ↗
33. Atmospheric corrosion of Zn–Al coatings in a simulated automotive environment*10.1080/02670844.2017.1305658 ↗
34. Atmospheric corrosion of Galfan coatings on steel in chloride-rich environments10.1016/j.corsci.2013.03.025 ↗
35. Influence of microstructure of zinc-aluminium-magnesium alloy coated steel on the corrosion behavior in outdoor marine atmosphere10.1016/j.surfcoat.2019.06.052 ↗
36. Atmospheric corrosion of ZnAlMg coated steel during long term atmospheric weathering at different worldwide exposure sites10.1016/j.corsci.2018.12.033 ↗
37. Electrochemical properties of corrosion products formed on Zn-Mg, Zn-Al and Zn-Al-Mg coatings in model atmospheric conditions10.1002/maco.201408058 ↗
38. Corrosion mechanisms of Zn(Mg, Al) coated steel in accelerated tests and natural exposure: 1. The role of electrolyte composition in the nature of corrosion products and relative corrosion rate10.1016/j.corsci.2014.05.014 ↗
39. Improved surface morphology and corrosion resistance for galvannealed coatings by pre-electroplating iron10.1016/j.corsci.2012.01.020 ↗
40. Corrosion behaviour of galvannealed steel sheet10.1016/j.surfcoat.2005.02.153 ↗
41. Atmospheric corrosion evaluation of electrogalvanized, hot-dip galvanized and galvannealed interstitial free steels using accelerated field and cyclic tests10.1016/j.surfcoat.2016.04.021 ↗
42. Towards the determination of the origin of sulfur compounds in marine zones by means of the chloride/sulfate ratio: applications in atmospheric corrosion studies10.1149/2.0751606jes ↗
43. Preparation et etude de chromates d′aluminium appartenant au systeme ternaire Al2O3, CrO3, H2O10.1016/0022-1902(74)80007-2 ↗
44. The effect of an artificially synthesized simonkolleite layer on the corrosion of electrogalvanized steel10.1016/j.corsci.2012.10.024 ↗
45. XPS and FT-IR characterization of selected synthetic corrosion products of zinc expected in neutral environment containing chloride ions10.1155/2018/2079278 ↗
46. FTIR spectroscopic semi-quantification of iron phases: a new method to evaluate the protection ability index (PAI) of archaeological artefacts corrosion systems10.1016/j.corsci.2018.01.016 ↗
47. The role of Na+ in Al surface corrosion studied by single-shot laser-induced breakdown spectroscopy10.1016/j.apsusc.2019.144238 ↗
48. The controlling role of sodium and carbonate on the atmospheric corrosion rate of aluminum10.1038/s41529-017-0020-3 ↗
49. ATR-FT-IR spectral collection of conservation materials in the extended region of 4000–80 cm–110.1007/s00216-016-9411-5 ↗
50. The influence of CO 2 and NaCl on the atmospheric corrosion of zinc: a laboratory study10.1149/1.1838753 ↗
51. Initial NaCl-particle induced atmospheric corrosion of zinc—Effect of CO2 and SO210.1016/j.corsci.2007.06.005 ↗
52. Synergistic effect of NaCl and SO 2 on the initial atmospheric corrosion of zinc under wet–dry cyclic conditions10.1007/s40195-018-0863-9 ↗
53. Initial formation of corrosion products on pure zinc and MgZn2 examinated by XPS10.1016/j.corsci.2013.10.029 ↗
54. Characterization of corrosion products of Zn and Zn–Mg–Al coated steel in a marine atmosphere10.1016/j.corsci.2014.06.017 ↗
55. J. Alcántara, D.d.l. Fuente, B. Chico, J. Simancas, I. Díaz, M. Morcillo, Marine Atmospheric Corrosion of Carbon Steel: A Review, Materials, 10 (2017) 406.10.3390/ma10040406 ↗
56. Corrosion protection of steel cut-edges by hot-dip galvanized Al(Zn,Mg) coatings in 1 wt% NaCl: Part II. Numerical simulations10.1002/maco.201810210 ↗
57. On the akaganéite crystal structure, phase transformations and possible role in post-excavational corrosion of iron artifacts10.1016/S0010-938X(03)00078-7 ↗
58. Leygraf · 2016
59. Localized corrosion of aluminum alloys—a review10.5006/1.3584905 ↗
60. Influence of Mn on the corrosion behaviour of medium manganese steels in a simulated seawater environment10.20964/2016.11.51 ↗
61. Effect of carbon dioxide on the atmospheric corrosion of Zn–Mg–Al coated steel10.1016/j.corsci.2013.05.011 ↗
62. Chemistry of corrosion products of Zn and MgZn pure phases under atmospheric conditions10.1016/j.corsci.2012.08.014 ↗
63. The identity of compounds containing chloride ions in marine iron corrosion products: a critical review10.1179/sic.1981.26.2.50 ↗
64. Respirometry, a new approach for investigation of the relationship between corrosion-induced hydrogen evolution and its entry into metallic materials10.1016/j.ijhydene.2024.04.045 ↗
65. Formation of corrosion products on open and confined metal surfaces exposed to periodic wet/dry conditions a comparison between zinc and electrogalvanized steel10.5006/1.3290385 ↗