Pt-modification on the thermal cycling behavior of NiCoCrAlYTa coating: A case study
Source abstract
Abstract
A NiCoCrAlYTa coating possessing homogenous microstructure was fabricated by high velocity oxygen fuel (HVOF) technique, in which some of the coating samples were electroplated with a thin layer of Pt. After vacuum annealing, thermal cycling tests of the NiCoCrAlYTa coatings with and without Pt modification were carried out at 1050 °C till 1000 cycles. The results revealed that Pt modification has assisted to improve the stability of the coating and to develop a highly purified alumina scale, where lower oxidation rate and residual stress were achieved in the Pt-modified NiCoCrAlYTa coating.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Advances in coating design for high-performance gas turbines10.1557/mrs2003.194 ↗
2. Effect of microstructure of a NiCoCrAlY coating fabricated by high-velocity air fuel on the isothermal oxidation10.1016/j.corsci.2019.108126 ↗
3. Effect of microstructure on early oxidation of MCrAlY coatings10.1016/j.actamat.2018.08.018 ↗
4. Effect of surface condition on the oxidation behaviour of MCrAlY coatings10.1016/j.surfcoat.2006.07.252 ↗
5. Microstructural analysis of Ta-containing NiCoCrAlY bond coats deposited by HVOF on different Ni-based superalloys10.1016/j.surfcoat.2018.09.025 ↗
6. Rouh Aghdam, Impact of MCrAlY feedstock powder modification by high-energy ball milling on the microstructure and high-temperature oxidation performance of HVOF-sprayed coatings10.1016/j.surfcoat.2020.125935 ↗
7. Effects of the β phase size and shape on the oxidation behavior of NiCoCrAlY coating10.1016/j.corsci.2018.10.008 ↗
8. Michael Resnick, Salvatore Marino, W. Brian Choi, Nitin P. Padture, Sea-salt-induced moderate-temperature degradation of thermally-sprayed MCrAlY bond-coats10.1016/j.surfcoat.2020.126459 ↗
9. A high performance NiCoCrAlY bond coat manufactured using laser powder deposition10.1016/j.corsci.2017.07.018 ↗
10. Thermal stability and oxidation behavior of nanostructured NiCoCrAlY coatings10.1016/j.surfcoat.2011.03.005 ↗
11. Investigation of vermiculite infiltration effect on microstructural properties of thermal barrier coatings (TBCs) produced by electron beam physical vapor deposition method (EB-PVD)10.1016/j.surfcoat.2022.128645 ↗
12. Comparison of microstructure and oxidation behavior of CoNiCrAlY coatings produced by APS, SSAPS, D-gun, HVOF and CGDS techniques10.1016/j.vacuum.2020.109609 ↗
13. Effects of surface finish on the initial oxidation of HVAF-sprayed NiCoCrAlY coatings10.1016/j.surfcoat.2019.02.068 ↗
14. The formation model of Ni–Cr oxides on NiCoCrAlY-sprayed coating10.1016/j.apsusc.2011.02.044 ↗
15. Effect of thermal treatment on high-temperature mechanical properties enhancement in LPPS, HVOF, and APS CoNiCrAlY coatings10.1007/s11666-009-9402-6 ↗
16. Thermal barrier coating life and isothermal oxidation of low-pressure plasma-sprayed bond coat alloys10.1016/0257-8972(90)90096-U ↗
17. Study on production of modified MCrAlY powder with nano oxide dispersoids as HVOF thermal spray feedstock using mechanical milling
18. Chlorine-induced high temperature corrosion of Inconel 625 sprayed coatings deposited with different thermal spray techniques10.1016/j.surfcoat.2016.12.086 ↗
19. Investigation of oxidation and hot corrosion behavior of molybdenum coatings produced by high-velocity oxy-fuel coating method10.1016/j.surfcoat.2022.128641 ↗
20. Parameter studies on high-velocity oxy-fuel spraying of MCrAlY coatings10.1016/S0257-8972(98)00630-6 ↗
21. Development of low-oxide MCrAlY coatings for gas turbine applications10.1007/s11666-006-9002-7 ↗
22. Effect of Pt-rich position on the hot corrosion behavior of NiCoCrAlY coating for a single-crystal superalloy10.1016/j.surfcoat.2020.125938 ↗
23. Beneficial effect of Pt and of pre-oxidation on the oxidation behaviour of an NiCoCrAlYTa bond-coating for thermal barrier coating systems10.1007/s11085-011-9241-y ↗
24. Pt effect on early stage oxidation behaviour of Pt-diffused γ-Ni/γ′-Ni3Al coatings10.1016/j.actamat.2020.03.013 ↗
25. Effect of surface curvature on oxidation of a MCrAlY coating10.1016/j.corsci.2019.108256 ↗
26. Influence of cryomilling on the morphology and composition of the oxide scales formed on HVOF CoNiCrAlY coatings10.1023/B:OXID.0000025332.26757.41 ↗
27. Oxidation and hot corrosion resistance of HVOF/EB-PVD thermal barrier coating system10.1016/j.surfcoat.2021.126862 ↗
28. Isothermal oxidation and thermal cyclic behaviors of YSZ and double-layered YSZ/La2Zr2O7 thermal barrier coatings (TBCs)10.1016/j.surfcoat.2018.07.069 ↗
29. Diffusion characteristics and structural stability of Pt modified β-NiAl/γ′-Ni3Al within NiCoCrAl alloy at high temperature10.1016/j.apsusc.2019.01.232 ↗
30. Co-doping effect of Hf and Y on improving cyclic oxidation behavior of (Ni,Pt)Al coating at 1150 °C10.1016/j.corsci.2020.109093 ↗
31. A novel single-phase γ′ nanocrystalline coating with high resistance to oxidation and scale rumpling yet mitigated interdiffusion with the alloy substrate10.1016/j.corsci.2021.109866 ↗
32. Oxidation behaviour of Pt modified aluminized NiCrAlYSi coating on a Ni-based single crystal superalloy10.1016/j.corsci.2018.02.007 ↗
33. Long-term oxidation of MCrAlY coatings at 1000 °C and an Al-activity based coating life criterion10.1016/j.surfcoat.2017.09.086 ↗
34. Microstructural analysis of Ta-containing NiCoCrAlY bond coats deposited by HVOF on different Ni-based superalloys10.1016/j.surfcoat.2018.09.025 ↗
35. Oxidation behavior of a nanocrystalline coating with low Ta content at high temperature10.1016/j.corsci.2020.109182 ↗
36. Cold spray for production of in-situ nanocrystalline MCrAlY coatings – Part II: Isothermal oxidation performance
37. Comprehensive study on the microstructure evolution and oxidation resistance performance of NiCoCrAlYTa coating during isothermal oxidation at High temperature10.1016/j.corsci.2020.108889 ↗
38. Oxidation behavior of Al/Y co-modified nanocrystalline coatings with different Al content on a nickel-based single-crystal superalloy10.1016/j.corsci.2020.108700 ↗
39. Hot corrosion behavior of YSZ, Gd2Zr2O7 and YSZ/Gd2Zr2O7 thermal barrier coatings exposed to molten sulfate and vanadate salt10.1016/j.apsusc.2017.09.047 ↗
40. α-NiPt(Al) and phase equilibria in the Ni–Al–Pt system at 1150 °C10.1016/j.actamat.2005.03.046 ↗
41. Hot corrosion and cyclic oxidation performance of a PtAl2-dispersed (Ni,Pt)Al coating prepared by low-activity high-temperature aluminizing10.1016/j.jallcom.2022.164978 ↗
42. Microstructure and high temperature oxidation behavior of Pt-modified aluminide bond coats on Ni-base superalloys10.1016/j.pmatsci.2012.08.002 ↗
43. Oxidation property and failure mechanism of a single phase PtAl2 coating
44. Effect of alloying elements in Ni-base substrate material on interdiffusion processes in MCrAlY-coated systems10.1016/j.surfcoat.2018.07.020 ↗
45. First-principles calculations for point defects in solids10.1103/RevModPhys.86.253 ↗
46. Site preference of transition metal elements in Ni3Al10.1016/j.scriptamat.2006.05.016 ↗
47. Site preference and alloying effect of platinum group metals in γ′-Ni3Al10.1016/j.actamat.2004.08.007 ↗
48. Site preference of ternary alloying elements in Ni3Al: A first-principles study
49. Surface segregation of Pt in γ′-Ni3Al: A first-principles study10.1016/j.actamat.2006.10.024 ↗
50. The effect of platinum on Al diffusion kinetics in β-NiAl:Implications for thermal barrier coating lifetime10.1016/j.actamat.2010.01.008 ↗
51. A combined first-principles and experimental study of the lattice site preference of Pt in B2 NiAl10.1016/j.actamat.2004.12.038 ↗
52. Influence of Pt on the metal–oxide interface during high temperature oxidation of NiAl bulk materials10.1016/j.corsci.2008.12.016 ↗
53. High temperature stress and its influence on surface rumpling in NiCoCrAlY bond coat10.1016/j.actamat.2017.08.001 ↗
54. Understanding of failure mechanisms of the oxide scales formed on nanocrystalline coatings with different Al content during cyclic oxidation10.1016/j.actamat.2020.116576 ↗
55. TGO growth and kinetic study of single and double layered TBC systems10.1016/j.surfcoat.2021.127135 ↗
56. Comprehensive study on the microstructure evolution and oxidation resistance performance of NiCoCrAlYTa coating during isothermal oxidation at High temperature10.1016/j.corsci.2020.108889 ↗
57. Effect of residual stress on the spallation of the thermally-grown oxide formed on NiCoCrAlY coating10.1016/j.surfcoat.2019.125112 ↗
58. Evaluation of oxidation and thermal cyclic behavior of YSZ, Gd2Zr2O7 and YSZ/Gd2Zr2O7 TBCs10.1016/j.surfcoat.2018.11.055 ↗
59. The influence of bondcoat and topcoat mechanical properties on stress development in thermal barrier coating systems10.1016/j.actamat.2009.01.017 ↗
60. Effect of the porosity on thermal stress within TBCs using finite element method10.4028/www.scientific.net/MSF.849.689 ↗