Corrosion behavior and protective performance of robustness mineralized layer formed on AZ80-0.38Nd (wt%) alloy
Source abstract
Abstract
In our previous work, a novel robustness mineralized layer was prepared on surface of AZ80–0.38Nd (wt%) alloy, which mainly consisted of rod-like structure MgCO 3•3 H 2O and flake structure 4MgCO 3•Mg(OH) 2•4 H 2 O. The mineralized layer exhibited outstanding robustness structure. While its corrosion protection for magnesium alloy has not been explored. In this paper, the corrosion behavior and protective performance of the robustness mineralized layer were investigated via hydrogen evolution and electrochemical measurements, systematically. The results show that the mineralized layer exhibited excellent anti-corrosion property in the NaCl solution compared with the oxide layer, due to the outstanding impermeability. And the mineralized layer presented better corrosion passivation and micro-galvanic corrosion inhibition effects due to the characteristics of slight defects and good adhesion to matrix. Besides, the mineralized layer could launch CO 3 2− during degradation of corrosion, which slowed down the penetration of Cl − across the layer and inhibited the attack of Cl − on magnesium substrate. The fabrication of robustness mineralized layer on magnesium alloys surface provides a novel effective strategy for improving the corrosion resistance of magnesium alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Controlling the ignition and flammability of magnesium for aerospace applications10.1016/j.corsci.2014.04.047 ↗
2. Casting technology and quality control of aluminum and magnesium alloy
3. Corrosion of magnesium alloys: the role of alloying10.1179/1743280414Y.0000000046 ↗
4. A study on the relationships between corrosion properties and chemistry of thermally oxidised surface films formed on polished commercial magnesium alloys AZ31 and AZ6110.1016/j.apsusc.2014.01.033 ↗
5. Effect of heat treatment on microstructure and corrosion behavior of Mg-5Al-1Zn-1Sn magnesium alloy10.1016/j.corsci.2021.109759 ↗
6. C. Dagger, MAG TECH 1: Magnesium Alloys and Processing Technologies for Lightweight Transport Applications-a Mission to Europe, Report of a DTI Global Watch Mission, September/October 2004, 25–31.
7. A biodegradable magnesium alloy vascular stent structure: design, optimisation and evaluation10.1016/j.actbio.2022.01.045 ↗
8. Corrosion behaviour of thermally sprayed Al and Al/SiCp composite coatings on ZE41 magnesium alloy in chloride medium10.1016/j.corsci.2009.10.040 ↗
9. Revisiting the cracking of chemical conversion coating on magnesium alloys10.1016/j.corsci.2020.109069 ↗
10. Enhancement corrosion resistance of Mg Al layered double hydroxides films by anion-exchange mechanism on magnesium alloys10.1016/j.apsusc.2019.05.048 ↗
11. Corrosion inhibition of layered double hydroxide coating for Mg alloy in acidic corrosive environments10.1002/maco.201910995 ↗
12. The reactive element effect on high-temperature oxidation of magnesium10.1179/1743280415Y.0000000001 ↗
13. The influence of pulse timing and current mode on the microstructure and corrosion behaviour of a plasma electrolytic oxidation (PEO) coated AM60B magnesium alloy10.1016/j.jallcom.2012.07.003 ↗
14. Recent advances in energy efficient PEO processing of aluminium alloys10.1016/S1003-6326(17)60166-3 ↗
15. Energy-efficient PEO process of aluminium alloys10.1016/j.matlet.2014.04.077 ↗
16. Influence of surface micro grooving pretreatment on MAO process of aluminum alloy10.1016/j.apsusc.2016.08.088 ↗
17. Layered double hydroxide (LDH) for multi-functionalized corrosion protection of metals: a review10.1016/j.jmst.2021.05.078 ↗
18. Preparation of corrosion-resistant MgAl-LDH/Ni composite coating on Mg alloy AZ31B10.1016/j.colsurfa.2021.127699 ↗
19. A nickelunderlayer/LDH-midlayer/siloxane-toplayer composite coating for inhibiting galvanic corrosion between Ni layer and Mg alloy
20. Preparation of a novel robustness mineralized layer on surface of AZ80-0.38Nd (wt%) alloy and investigation of its properties10.1016/j.apsusc.2022.153970 ↗
21. ISO 8407 Standard , 2021 Corrosion of Metals and Alloys—Removal of Corrosion Products From Corrosion Test Specimens.
22. C. Cheng, Q. Le, C. Hu, W. Hu, T. Wang, B. Zhu, X. Zhou, Understanding on corrosion mechanism of oxidized AZW800 alloy in 3.5 wt% NaCl solution, J. Magnes. Alloys xxx (xxx) xxx, https://doi.org/10.1016/j.jma.2021.08.015.10.1016/j.jma.2021.08.015 ↗
23. Effect of Y on high-temperature oxidation behavior and products of AZ80 alloy10.1016/j.matchemphys.2021.124732 ↗
24. A mechanistic understanding on rumpling of a NiCoCrAlY bond coat for thermal barrier coating applications10.1016/j.actamat.2017.02.003 ↗
25. Key factor influence the ignition resistance of magnesium alloys at elevated temperatures10.1016/j.scriptamat.2011.08.019 ↗
26. Effect of residual stress on the spallation of the thermally-grown oxide formed on NiCoCrAlY coating10.1016/j.surfcoat.2019.125112 ↗
27. Corrosion resistance and anomalous hydrogen evolution in chloride containing solutions of extruded cast and powder metallurgical Mg-1Zn alloy10.1016/j.corsci.2022.110635 ↗
28. Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE4110.1016/j.corsci.2008.08.023 ↗
29. Effects of dynamic recrystallization and strain-induced dynamic precipitation on the corrosion behavior of partially recrystallized Mg–9Al–1Zn alloys10.1016/j.jma.2020.09.005 ↗
30. Enhanced corrosion resistance of AZ91 magnesium alloy through refinement and homogenization of surface microstructure by friction stir processing10.1016/j.corsci.2018.04.028 ↗
31. Eelectrochemical properties and corrosion resistance of carbon-ion-implanted magnesium10.1016/j.corsci.2014.01.015 ↗
32. The corrosion behavior of Mg-9Al-xRE magnesium alloys modified by friction stir processing10.1016/j.jallcom.2020.156835 ↗
33. A chemical-free sealing method for micro-arc oxidation coatings on AZ31 mg alloy10.1016/j.surfcoat.2020.126655 ↗
34. An investigation of the corrosion mechanisms of WE43 Mg alloy in a modified simulated body fluid solution: the effect of electrolyte renewal10.1016/j.corsci.2014.11.034 ↗
35. Effects of aging temperature and time on the corrosion protection provided by trivalent chromium process coatings on AA2024-T310.1021/am4020023 ↗
36. Local potential measurements with the SKPFM on aluminium alloys10.1016/j.electacta.2004.01.045 ↗
37. Dargusch · 1998 · 277
38. Song · 2006 · 169
39. Role of alloyed Nd in the microstructure and atmospheric corrosion of as-cast magnesium alloy AZ9110.1016/j.corsci.2015.04.004 ↗
40. Corrosion resistance of Mg–Al-LDH coating on magnesium alloy AZ3110.1016/j.surfcoat.2014.07.017 ↗