Effects of heterogeneous plastic strain on hydrogen-induced cracking of twinning-induced plasticity steel: A quantitative approach
Source abstract
Abstract
Heterogeneous plastic strain is essential for understanding hydrogen-induced crack (HIC) initiation in twining-induced plasticity (TWIP) steel with relatively no microtexture. In this study, electron backscattered diffraction technology was used to quantitatively characterize the heterogeneous plastic strain after a slow strain rate test with hydrogen charging, and the deformation mode and HIC initiation mechanism were clarified. From a statistical analysis of more than 100 grain boundaries, the cracked grain boundary and its vicinity have high heterogeneous strain; that is, the geometrically necessary dislocation density is high, and vice versa. Therefore, high strain incompatibility is the key factor for HIC initiation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
2. On the deformation twinning mechanisms in twinning-induced plasticity steel10.1016/j.actamat.2017.09.043 ↗
3. Study of hydrogen-induced delayed fracture in high-Mn TWIP/TRIP steels during in situ electrochemical hydrogen-charging: Role of microstructure and strain rate in crack initiation and propagation10.1016/j.corsci.2019.108191 ↗
4. Statistical study on the effects of heterogeneous deformation and grain boundary character on hydrogen-induced crack initiation and propagation in twining-induced plasticity steels10.1016/j.corsci.2021.109796 ↗
5. Fractal and multifractal analysis of fracture surfaces caused by hydrogen embrittlement in high-Mn twinning/transformation-induced plasticity steels10.1016/j.apsusc.2018.11.179 ↗
6. Effect of grain boundary engineering on hydrogen embrittlement in Fe-Mn-C TWIP steel at various strain rates10.1016/j.corsci.2018.07.028 ↗
7. Effect of heat treatment processes on hydrogen embrittlement in hot-rolled medium Mn steels10.1016/j.ijhydene.2020.04.241 ↗
8. The role of slip transfer at grain boundaries in the propagation of microstructurally short fatigue cracks in Ni-based superalloys10.1016/j.scriptamat.2018.11.008 ↗
9. Hydrogen-assisted failure in Inconel 718 fabricated by laser powder bed fusion: The role of solidification substructure in the embrittlement10.1016/j.scriptamat.2021.114308 ↗
10. Critical role of Lüders banding in hydrogen embrittlement susceptibility of medium Mn steels10.1016/j.scriptamat.2020.08.025 ↗
11. Austenite morphology and resistance to hydrogen embrittlement in medium Mn transformation-induced plasticity steel10.1016/j.scriptamat.2019.05.011 ↗
12. Tensile and fracture behaviors of austenitic high-manganese steels subject to different hydrogen embrittlement test methods
13. Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging10.1016/j.actamat.2013.04.030 ↗
14. Overview of hydrogen embrittlement in high-Mn steels10.1016/j.ijhydene.2017.02.214 ↗
15. Role of ɛ martensite in tensile properties and hydrogen degradation of high-Mn steels10.1016/j.msea.2011.11.039 ↗
16. The effect of Si on hydrogen embrittlement of Fe-18Mn-0.6C-xSi twinning-induced plasticity steels10.1016/j.actamat.2015.10.015 ↗
17. Effect of crystallographic orientation and geometrical compatibility on fatigue crack initiation and propagation in rolled Ti-6Al-4V alloy10.1016/j.actamat.2019.07.025 ↗
18. An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al10.1016/j.ijplas.2019.02.014 ↗
19. Effect of slip transmission at grain boundaries in Al bicrystals10.1016/j.ijplas.2019.09.006 ↗
20. Microstructure of individual grains in cold-rolled aluminium from orientation inhomogeneities resolved by electron backscattering diffraction10.1016/j.msea.2007.10.092 ↗
21. Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density10.1016/S1359-6454(99)00020-8 ↗
22. Chemomechanical effects on the separation of interfaces occurring during fracture with emphasis on the hydrogen-iron and hydrogen-nickel system10.1016/j.actamat.2015.07.057 ↗
23. Synchrotron X-ray Laue diffraction study of hydrogen-induced blisters on iron grain boundaries10.1016/j.scriptamat.2019.05.009 ↗
24. Chapter 91 hydrogen effects on plasticity10.1016/S1572-4859(09)01504-6 ↗
25. Hydrogen-enhanced load relaxation in a deformed medium-carbon steel10.1016/0001-6160(79)90187-1 ↗
26. Effects of hydrogen on the properties of iron and steel10.1007/BF02654700 ↗
27. Mechanics of the hydrogendashdislocationdashimpurity interactions—I. Increasing shear modulus10.1016/0022-5096(94)00056-B ↗