Effect of fretting wear regimes on stress corrosion cracking of Alloy 690TT in high-temperature pressurized water
Source abstract
Abstract
Stress corrosion cracks initiation and propagation of Alloy 690TT under different fretting regimes were investigated. The results indicated that mixed regime had the highest susceptibility to stress corrosion cracking, followed by gross slip regime, and then partial slip regime. Crack initiation depended on the distribution of residual strain induced by fretting regimes. In partial slip and mixed regimes, cracks were mainly initiated at the edge of the wear scar, while in gross slip regime, cracks were randomly distributed on the wear scar. Crack propagation was related to the type of grain boundaries and geometrically necessary dislocation density induced by fretting loading. In partial slip and gross slip regimes, cracks usually tended to propagate intergranularly. While in MR, cracks mainly propagated in a transgranular manner.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Progress in studying the fretting wear/corrosion of nuclear steam generator tubes10.1016/j.anucene.2020.107556 ↗
2. Effects of lead on oxidation behavior of Alloy 690TT within a high temperature aqueous environment10.1016/j.apsusc.2017.07.201 ↗
3. Oxide properties of deformed Alloy 690TT in caustic solution at high temperature10.1016/j.corsci.2020.108806 ↗
4. Effects of amplitude and frequency on the wear mode change of Inconel 690 SG tube mated with SUS 40910.1016/j.wear.2014.02.019 ↗
5. Experimental investigation of long-term fretting wear of multi-span steam generator tubes with U-bend sections10.1016/S0043-1648(98)00382-2 ↗
6. Friction and wear of Inconel 690 for steam generator tube in elevated temperature water under fretting condition10.1016/j.triboint.2004.08.012 ↗
7. The role of frequency on fretting corrosion of Alloy 690TT against 304 stainless steel in high temperature high pressure water10.1016/j.matchar.2017.10.032 ↗
8. Stress corrosion cracking in stainless steels
9. Stress corrosion cracking (SCC) of austenitic stainless steels in high temperature light water reactor (LWR) environments
10. Size effect of scratches on the degradation behavior of alloy 690TT in high temperature caustic solution10.1016/j.corsci.2021.109314 ↗
11. Effect of cold work on the stress corrosion cracking behavior of Alloy 690 in supercritical water environment10.1016/j.jnucmat.2017.10.003 ↗
12. The effect of cold rolling on grain boundary structure and stress corrosion cracking susceptibility of twins in alloy 690 in simulated PWR primary water environment10.1016/j.corsci.2017.11.002 ↗
13. Partial-gross slip fretting transition of martensitic stainless steels10.1016/j.triboint.2020.106163 ↗
14. The effect of slip regime on fretting wear-induced stress evolution10.1016/j.ijfatigue.2003.09.001 ↗
15. On fretting maps10.1016/0043-1648(88)90134-2 ↗
16. An elastic–plastic investigation of third body effects on fretting contact in partial slip10.1016/j.ijsolstr.2015.11.013 ↗
17. Effects of fatigue damage and wear on fretting fatigue under partial slip condition10.1016/j.wear.2015.07.012 ↗
18. Effects of dissolved oxygen on partial slip fretting corrosion of Alloy 690TT in high temperature pure water10.1016/j.jnucmat.2020.152483 ↗
19. Introduction of a new sliding regime criterion to quantify partial, mixed and gross slip fretting regimes: Correlation with wear and cracking processes10.1016/j.wear.2010.05.002 ↗
20. Mixed fretting regime10.1016/0043-1648(95)90168-X ↗
21. Study on the fretting maps of Zircaloy-4 alloy against Inconel 718 alloy10.1016/j.triboint.2021.107024 ↗
22. Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact10.1016/j.triboint.2017.01.010 ↗
23. Microstructural characteristics of Alloy 690TT subjected to fretting corrosion in high temperature water10.1016/j.corsci.2017.04.009 ↗
24. Fretting corrosion-induced microstructural evolution of Alloy 690TT tube in high temperature pressurised water10.1016/j.corsci.2022.110774 ↗
25. Understanding the microstructure evolution of Ni-based superalloy within two different fretting wear regimes in high temperature high pressure water10.1016/j.scriptamat.2019.05.037 ↗
26. Insights into stress corrosion cracking in scratched area of alloy 690TT steam generator tubes10.1016/j.actamat.2023.119083 ↗
27. Effects of surface grinding for scratched alloy 690TT tube in PWR nuclear power plant: microstructure and stress corrosion cracking10.1016/j.jmst.2021.11.009 ↗
28. Effects of dissolved hydrogen on general corrosion behavior and oxide films of alloy 690TT in PWR primary water10.1016/j.jnucmat.2016.12.020 ↗
29. Hydrogen assisted crack initiation and propagation in a nickel-based superalloy10.1016/j.actamat.2016.05.003 ↗
30. Advanced microstructural characterization of transgranular Pb-caustic SCC in Alloy 690TT10.1016/j.corsci.2022.110461 ↗
31. The mechanism of stress corrosion cracking of Alloy 690TT in a caustic solution containing lead10.1016/j.corsci.2017.09.015 ↗
32. A high-resolution characterization of the initiation of stress corrosion crack in Alloy 690 in simulated pressurized water reactor primary water10.1016/j.corsci.2019.108243 ↗
33. The effects of grain boundary carbide density and strain rate on the stress corrosion cracking behavior of cold rolled Alloy 69010.1016/j.corsci.2015.04.020 ↗
34. Mechanism-based strain gradient plasticity—I. Theory10.1016/S0022-5096(98)00103-3 ↗
35. Stress and strain around grain-boundary dislocations measured by high-resolution electron microscopy10.1080/14786430600743876 ↗
36. Quantitative measurement of displacement and strain fields from HREM micrographs10.1016/S0304-3991(98)00035-7 ↗
37. Application of high-resolution electron microscopy for visualization and quantitative analysis of strain fields in heterostructures10.3103/S1062873807100267 ↗
38. Direct mapping of strain in a strained silicon transistor by high-resolution electron microscopy10.1103/PhysRevLett.100.156602 ↗
39. Plastic deformation induced extremely fine nano-grains in nickel10.1016/j.msea.2020.140664 ↗
40. Microstructural characterization of nickel subjected to dynamic plastic deformation10.1016/j.scriptamat.2011.11.022 ↗
41. Strain-induced microstructure refinement in pure Al below 100 nm in size10.1016/j.actamat.2018.04.014 ↗
42. Tensile strain induced texture evolution in a Ni–Mo alloy with extremely fine nanotwinned columnar grains10.1016/j.msea.2021.141108 ↗
43. Wear damage of Alloy 690TT in partial and gross slip fretting regimes at high temperature10.1016/j.wear.2017.07.006 ↗
44. Investigation on the fretting wear behavior and mechanisms of alloy 690TT during the transformation from mixed regime to partial slip regime induced by elevated temperature10.1080/10402004.2019.1573340 ↗
45. Stress Corrosion Cracking in Metals
46. Stress corrosion cracking in metals – mechanisms
47. The influence of nanocrystalline structure and processing route on corrosion of stainless steel: a review10.1016/j.corsci.2014.11.041 ↗
48. Gupta · 2010
49. Free energy of active atoms in grain boundaries of nanocrystalline copper, nickel and palladium10.1016/0965-9773(92)90071-5 ↗
50. Diffusion in nanocrystalline materials10.1016/S0022-3697(02)00421-3 ↗
51. Diffusion of chromium in nanocrystalline iron produced by means of surface mechanical attrition treatment10.1016/S1359-6454(03)00260-X ↗
52. Tarnishing film-induced brittle cracking of brass10.1557/jmr.2009.0289 ↗
53. The correspondence between susceptibility to SCC of brass and corrosion-induced tensile stress with various pH values10.1016/S0010-938X(02)00055-0 ↗
54. In situ TEM study of stress corrosion cracking of austenitic stainless steel10.1016/S0010-938X(02)00225-1 ↗
55. On corrosion induced stress states in binary noble metal alloys
56. Molecular dynamics simulation of porous layer-induced stress in Fe single crystal10.1016/j.commatsci.2010.06.006 ↗
57. Protection of Ni-base superalloys against stress accelerated grain boundary oxidation (SAGBO) by grain boundary chemistry modification10.1016/S1359-6462(98)00375-3 ↗
58. The role of crack tip strain rate in the stress corrosion cracking of high strength steels in water10.1007/BF02651655 ↗
59. The intergranular oxidation behavior of low-angle grain boundary of alloy 600 in simulated pressurized water reactor primary water10.1016/j.actamat.2021.117533 ↗
60. Insights into the roles of intergranular carbides in the initiation of intergranular stress corrosion cracking of alloy 690 in simulated PWR primary water10.1016/j.corsci.2021.110048 ↗
61. On the role of intergranular nanocavities in long-term stress corrosion cracking of Alloy 69010.1016/j.actamat.2021.117453 ↗
62. Precipitation formation on ∑5 and ∑7 grain boundaries in 316L stainless steel and their roles on intergranular corrosion10.1016/j.actamat.2021.116822 ↗
63. Quantitative linkage between the stress at dislocation channel – grain boundary interaction sites and irradiation assisted stress corrosion crack initiation10.1016/j.actamat.2019.02.032 ↗
64. Understanding the effect of nitrogen in austenitic stainless steel on the intergranular stress corrosion crack growth rate in high temperature pure water10.1016/j.actamat.2011.09.053 ↗
65. Correlation between grain boundary migration and stress corrosion cracking of alloy 600 in hydrogenated steam10.1016/j.actamat.2020.01.020 ↗
66. Model of vacancy diffusion-assisted intergranular corrosion in low-alloy steel10.1016/j.actamat.2021.117348 ↗
67. In situ synchrotron X-ray tomography of 304 stainless steels undergoing chlorine-induced stress corrosion cracking10.1016/j.corsci.2020.108687 ↗
68. Architecting the metal-nonmetal oxide layers for boosting the oxygen-evolving intrinsic activity of amorphous alloy10.1016/j.cej.2023.147552 ↗
69. In situ formed nickel tungsten oxide amorphous layer on metal–organic framework derived ZnxNi1−xWO4 surface by self-reconstruction for acid hydrogen evolution reaction10.1016/j.jcis.2023.08.146 ↗
70. The thermodynamic stability of amorphous oxide overgrowths on metals10.1016/j.actamat.2007.10.023 ↗
71. In situ observation of two-step crystallization of amorphous oxides via electron microscopy10.1016/j.apsusc.2023.158401 ↗
72. Unveiling the complex electronic structure of amorphous metal oxides10.1073/pnas.1019698108 ↗
73. Insights into the fatigue cracking of Alloy 690TT subjected to fretting wear under partial slip conditions10.1016/j.matchar.2019.110040 ↗
74. An ATEM study of oxidation behavior of SCC crack tips in 304L stainless steel in high temperature oxygenated water10.1016/j.jnucmat.2005.07.006 ↗
75. Insight into the acceleration in oxidation kinetics ahead of stress corrosion crack of alloy 690 in simulated PWR primary water10.1016/j.corsci.2020.108943 ↗
76. Stress corrosion cracking of the titanium alloys under hydrostatic pressure resulting from the degradation of passive films10.1016/j.actamat.2023.118946 ↗
77. Characterization of initial intergranular oxidation processes in alloy 600 at a sub-nanometer scale10.1016/j.corsci.2018.01.020 ↗