In depth analysis of the passive film on martensitic tool alloy: Effect of tempering temperature
Source abstract
Abstract
Effect of tempering temperature on the composition of the passive film of a martensitic tool alloy was studied by synchrotron-based hard/soft X-ray photoelectron spectroscopy and electrochemical analyses. The contents of Cr and Mo in the passive film are affected by precipitation of tempering carbides. Increase of tempering temperature from 200 to 525°C leads to enhanced formation of Cr/Mo-rich tempering carbides and Cr depletion. Tempering at 525°C results in a Cr content < 11 at.% in the underlying metallic layer and formation of a Cr-deficient defective passive film, and thus loss of passivity for the tool alloy in corrosive conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. A.R. Gholi, G. Lindwall, M. Jönsson, Effects of tempering on corrosion properties of high nitrogen alloyed tooling steels in pyrolysis oil, Swerea KIMAB AB, The influence of pH and chloride concentration on the corrosion behaviour of AISI 316L steel in aqueous solutions, 2011. urn:nbn:se:kth:diva-40471.
2. Die material properties needed for Hot Stamping of High Strength Sheet Materials
3. Monitoring of Injection Molding Tool Corrosion and Effects of Wood Plastic Compound’s Moisture on Material Properties10.3139/217.3382 ↗
4. Passive films on stainless steels—chemistry, structure and growth10.1016/S0013-4686(02)00841-1 ↗
5. Passive film of 18-8 stainless steel structure and its function10.1016/0010-938X(73)90031-0 ↗
6. Evolution and characterization of the film formed on super 13Cr stainless steel in CO2-saturated formation water at high temperature10.1016/j.corsci.2019.108277 ↗
7. A thermodynamic and kinetic study of the formation and evolution of corrosion product scales on 13Cr stainless steel in a geothermal environment10.1016/j.corsci.2020.108640 ↗
8. Bridge for the thermodynamics and kinetics of electrochemical corrosion: Modeling on dissolution, ionization, diffusion and deposition in metal/solution interface10.1016/j.corsci.2021.109763 ↗
9. Investigation of the rotation speed on corrosion behavior of HP-13Cr stainless steel in the extremely aggressive oilfield environment by using the rotating cage test10.1016/j.corsci.2018.10.011 ↗
10. XPS study of passive films formed on molybdenum-implanted austenitic stainless steels10.1002/sia.740190175 ↗
11. The role of molybdenum additions to austenitic stainless steels in the inhibition of pitting in acid chloride solutions10.1016/0010-938X(77)90032-4 ↗
12. Dominant role of molybdenum in the electrochemical deposition of biological macromolecules on metallic surfaces10.1021/la304046q ↗
13. Possible mechanisms for the improvement by vanadium of the pitting corrosion resistance of 18% chromium ferritic stainless steel10.1016/S0010-938X(02)00050-1 ↗
14. Synchrotron-based near ambient-pressure X-ray photoelectron spectroscopy and electrochemical studies of passivation behavior of N-and V-containing martensitic stainless steel10.1016/j.corsci.2023.111018 ↗
15. Control of M23C6 carbides in 0.45C–13Cr martensitic stainless steel by means of three representative heat treatment parameters10.1016/S0921-5093(97)00491-7 ↗
16. Effects of carbon content, deformation, and interfacial energetics on carbide precipitation and corrosion sensitization in 304 stainless steel10.1016/S1359-6454(98)00322-X ↗
17. The role of grain boundary microchemistry in irradiation-assisted stress corrosion cracking of a Fe-13Cr-15Ni alloy10.1016/j.actamat.2017.07.042 ↗
18. A novel 13Cr austenitic stainless steel with excellent mechanical properties and high hydrogen embrittlement resistance via heterostructure and TRIP effects10.1016/j.msea.2020.139835 ↗
19. Achieving a superior combination of tensile properties and corrosion resistance in AISI420 martensitic stainless steel by low-temperature tempering10.1016/j.corsci.2023.111551 ↗
20. Assessment of the correlation between M23C6 precipitates and pitting corrosion resistance of 0Cr13 martensitic stainless steel10.1016/j.corsci.2021.109580 ↗
21. Influence of microstructure on the corrosion behavior of super 13Cr martensitic stainless steel under heat treatment10.1016/j.matchar.2021.111066 ↗
22. Influence of tempering treatment on microstructure and pitting corrosion of 13 wt% Cr martensitic stainless steel10.1016/j.corsci.2017.12.012 ↗
23. Characterization of precipitates in X12CrMoWVNbN10-1-1 steel during heat treatment10.1016/j.jnucmat.2014.06.018 ↗
24. Influence of tempering treatment on microstructure and pitting corrosion resistance of a new super ferritic–martensitic–austenitic stainless steels with 17% Cr10.1080/1478422X.2015.1110418 ↗
25. Unmasking of the temperature window and mechanism for “loss of passivation” effect of a Cr-13 type martensite stainless steel10.1016/j.corsci.2020.108951 ↗
26. Relationship between microstructure and corrosion behavior of martensitic high nitrogen stainless steel 30Cr15Mo1N at different austenitizing temperatures10.3390/ma10080861 ↗
27. Underlying mechanism for “loss of passivation” effect of a high-carbon martensitic stainless steel coating via laser cladding10.1149/1945-7111/acbca3 ↗
28. Combined XPS/TEM study of the chemical composition and structure of the passive film formed on additive manufactured 17-4PH stainless steel
29. UDDEHOLMS AB, Uddeholm Tyrax ESR - Technical brochure, (2020). 〈https://www.uddeholm.com/app/uploads/sites/10/2023/07/productdb/api/tech_uddeholm-tyrax-esr_en.pdf〉.
30. C. Schlueter, A. Gloskovskii, K. Ederer, I. Schostak, S. Piec, I. Sarkar, Y. Matveyev, P. Lömker, M. Sing, R. Claessen, others, The new dedicated HAXPES beamline P22 at PETRAIII, in: AIP Conference Proceedings, AIP Publishing, 2019. 〈https://doi.org/10.1063/1.5084611〉.10.1063/1.5084611 ↗
31. HIPPIE: a new platform for ambient-pressure X-ray photoelectron spectroscopy at the MAX IV Laboratory10.1107/S160057752100103X ↗
32. Dynamic structural evolution of iron catalysts involving competitive oxidation and carburization during CO2 hydrogenation10.1126/sciadv.abm3629 ↗
33. Surface Chemistry and Semiconducting Properties of Passive Film and Corrosion Resistance of Annealed Surgical Stainless Steel10.1007/s11665-020-05067-3 ↗
34. The Oxygen Evolution Reaction Drives Passivity Breakdown for Ni–Cr–Mo Alloys10.1002/adma.202304621 ↗
35. Passivation characteristics of ultra-thin 316L foil in NaCl solutions10.1016/j.jmst.2022.01.043 ↗
36. Hypo-toxicity and prominent passivation characteristics of 316 L stainless steel fabricated by direct metal laser sintering in a simulated inflammation environment10.1016/j.jmst.2021.03.053 ↗
37. Revealing the superior corrosion protection of the passive film on selective laser melted 316L SS in a phosphate-buffered saline solution10.1016/j.apsusc.2020.147170 ↗
38. Significance of Pourbaix diagrams to study the corrosion behaviour of hardfacing alloys based on chromium carbides at 298 K (25C)10.1007/s40735-016-0047-y ↗
39. On the evaluation of corrosion resistances of amorphous chromium-carbon thin-films10.1016/j.electacta.2013.11.130 ↗
40. Simultaneous oxidation and carburisation of chromia forming alloys10.1016/j.ijhydene.2006.08.027 ↗
41. Unveiling nano-scale chemical inhomogeneity in surface oxide films formed on V- and N-containing martensite stainless steel by synchrotron X-ray photoelectron emission spectroscopy/microscopy and microscopic X-ray absorption spectroscopy
42. Correlative microstructure analysis and in situ corrosion study of AISI 420 martensitic stainless steel for plastic molding applications10.1149/2.0531704jes ↗
43. In situ AFM study of localized corrosion processes of tempered AISI 420 martensitic stainless steel: effect of secondary hardening10.1149/2.1261713jes ↗
44. Hariramabadran · 2018
45. The correlation between the distribution/size of carbides and electrochemical behavior of 17Cr-1Ni Ferritic-Martensitic stainless steel10.1007/s11661-018-4973-9 ↗