Revealing the effect of heat treatment on stress corrosion cracking behavior of Monel 400 alloy in hydrofluoric acid vapor environment
Source abstract
Abstract
The effect of heat treatment (HT) on the stress corrosion cracking (SCC) of Monel 400 alloy in hydrofluoric acid (HF) vapor was investigated through cracking crystallographic analysis. The SCC resistance is ordered as 750 °C-HT > AR > 850 °C-HT > 950 °C-HT > 1050 °C-HT, while the SCC failure mechanism is similar which is active dissolution-slip tearing. HT increases grain size and reduces residual strain , and large grains promote both slip and active dissolution, all contributing to higher SCC susceptibility . In addition, residual strain accelerates corrosion degradation, which counteracts the beneficial effect of fine grain on SCC resistance . Data availability The raw/processed data required to reproduce these findings cannot be shared at this time due to technical or time limitations. They can be provided on request.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Research on the utilization and industry development strategies of fluorite resources in China's fluorine chemical industry
2. Recent progress on the corrosion behavior of metallic materials in HF solution10.1515/corrrev-2020-0101 ↗
3. Why is hydrofluoric acid a weak acid10.1063/1.2090259 ↗
4. Pits formation and stress corrosion cracking behavior of Q345R in hydrofluoric acid10.1016/j.corsci.2020.108443 ↗
5. Stress corrosion cracking behavior of 316 L SS in HF vapor environment based on corrosion degradation as a precursor10.1016/j.corsci.2022.110615 ↗
6. H.S. Jennings, Materials for hydrofluoric acid service in the new millennium, in: Corrosion 2001, NACE International, 2001.10.5006/C2001-01345 ↗
7. Effects of elemental composition and microstructure inhomogeneity on the corrosion behavior of nickel-based alloys in hydrofluoric acid solution10.1016/j.corsci.2020.108917 ↗
8. Regulating the passive film of NiCoCrMo alloy in hydrofluoric acid solution by small addition of Cu10.1016/j.corsci.2015.05.024 ↗
9. Influence of Mo concentration on corrosion resistance to HF acid solution of Ni–Co–Cr–Mo alloys with and without Cu10.1016/j.corsci.2015.07.004 ↗
10. Corrosion mechanisms of nickel-based alloys in chloride-containing hydrofluoric acid solution10.1016/j.engfailanal.2022.106580 ↗
11. C.M. Schillmoller, Corrosion Resistance of Nickel-Containing Alloys in Hydrofluoric Acid, Hydrogen Fluoride and Fluorine, NIDI Techn. Ser, 1993.
12. 7 - Stress corrosion cracking (SCC) of nickel-based alloys
13. Stress corrosion cracking of monel in hydrofluoric acid10.5006/0010-9312-12.12.71 ↗
14. L.G. Everhart, Stress corrosion cracking in Monel 400, in, Oklahoma State University, 1989.
15. Untersuchung von Sonderfällen der Spannungskorrosion bei homogenen, nicht übersättigten Mischkristallen und der hierbei auftretenden elektrochemischen Prozesse10.1002/maco.19660170505 ↗
16. H.S. Jennings, Monel 400 corrosion characteristics in hydrofluoric acid (HF), ASM International, Member/Customer Service Center Materials Park OH 44073–0002 United States, 2010., 1, 2010: pp. 340–349,
17. R. Kumar, U. Chatterjee, Prevention possibilities of stress corrosion cracking of Monel 400 in hydrofluoric acid, 11th International Conference on Fracture 2005, ICF11, 3, 2005.
18. P. Crook, N.S. Meck, R. Rebak, The influence of composition upon surface degradation and stress corrosion cracking of the Ni-Cr-Mo alloys in wet hydrofluoric acid, in: NACE - International Corrosion Conference Series, 2007, pp. 074811–0748113.10.5006/C2007-07481 ↗
19. Corrosion behavior of nickel alloys in wet hydrofluoric acid10.1002/1521-4176(200104)52:4<289::AID-MACO289>3.0.CO;2-0 ↗
20. Corrosion of high-alloy materials in aqueous hydrofluoric acid environments10.5006/1.3293488 ↗
21. Strengthening mechanisms in nickel-copper alloys: a review10.3390/met10101358 ↗
22. Influence of grain size on the constitutive response and substructure evolution of MONEL 40010.1007/s11661-999-0273-8 ↗
23. Everhart · 1990
24. Metal materials for handling aqueous hydrofluoric acid10.1021/ie50541a043 ↗
25. Effects of laser peening on stress corrosion cracking (SCC) of ANSI 304 austenitic stainless steel10.1016/j.corsci.2012.03.044 ↗
26. The role of cold work and applied stress on surface oxidation of 304 stainless steel10.1016/j.corsci.2011.11.021 ↗
27. Revealing the relationship between grain size and corrosion rate of metals10.1016/j.scriptamat.2010.08.035 ↗
28. Understanding the effect of surface finish on stress corrosion crack initiation in warm-forged stainless steel 304L in high-temperature water10.1016/j.scriptamat.2019.01.032 ↗
29. Enhanced corrosion resistance of CoCrFeMnNi high entropy alloy using heterogeneous structure design10.1016/j.corsci.2022.110761 ↗
30. Stress corrosion cracking susceptibility of ultrafine grained Al–Mg–Sc alloy10.1016/j.msea.2012.11.066 ↗
31. Effect of Grain Size on the Stress Corrosion Cracking of Ultrafine Grained Cu-10 wt% Zn Alloy in Ammonia10.1155/2017/2893276 ↗
32. Structure-dependence of intergranular corrosion in high purity nickel10.1016/0956-7151(90)90101-L ↗
33. Grain boundary design and control for intergranular stress-corrosion resistance10.1016/0956-716X(91)90303-I ↗
34. Nanoscale characterisation of grain boundary oxidation in cold-worked stainless steels10.1016/j.corsci.2012.06.030 ↗
35. The effects of intergranular carbides on the grain boundary oxidation and cracking in a cold-worked Alloy 60010.1016/j.corsci.2019.05.008 ↗
36. Characterization of the crack initiation and propagation in Alloy 600 with a cold-worked surface10.1016/j.corsci.2019.03.014 ↗
37. Effects of cold working on corrosion resistance of Co-modified Ni–16Cr–15Mo alloy in hydrofluoric acid solution10.1016/j.corsci.2014.09.004 ↗
38. Effect of deformation level and orientation on SCC of 316L stainless steel in simulated light water environments10.1016/j.jnucmat.2020.152038 ↗
39. The effect of prior deformation on stress corrosion cracking growth rates of Alloy 600 materials in a simulated pressurized water reactor primary water10.1016/j.corsci.2007.07.012 ↗
40. S. Bruemmer, M. Olszta, N. Overman, M. Toloczko, Cold work effects on stress corrosion crack growth in alloy 690 tubing and plate materials, in: 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, Canadian Nuclear Society Toronto, Canada, 2015.
41. Effect of cold‐work on corrosion of iron and steel in hydrochloric acid10.1149/1.2426172 ↗
42. Effect of plastic deformation on the corrosion of iron and steel10.5006/0010-9312-20.9.293t ↗
43. Preparation and electrochemical corrosion behavior of bulk nanocrystalline ingot iron in HCl acid solution10.1021/jp046297v ↗
44. The electrochemical corrosion of bulk nanocrystalline ingot iron in acidic sulfate solution10.1021/jp0538971 ↗
45. E. Hall, The deformation and ageing of mild steel: II characteristics of the Lüders deformation, Proceedings of the physical society. Section B, 64, 1951: pp. 742–747,10.1088/0370-1301/64/9/302 ↗
46. E. Hall, The deformation and ageing of mild steel: III discussion of results, Proceedings of the Physical Society. Section B, 64, 1951: pp. 747–753,10.1088/0370-1301/64/9/303 ↗
47. 3 - Testing and evaluation methods for stress corrosion cracking (SCC) in metals
48. The slow strain rate stress corrosion cracking test—a 50 year retrospective10.5006/2137 ↗
49. Effect of strain rate on stress corrosion crack velocity: difference between intergranular and transgranular cracking10.1016/S0010-938X(98)00118-8 ↗
50. A theory of transgranular stress-corrosion cracking10.1016/0956-7151(91)90138-Q ↗
51. A review of present mechanisms of transgranular stress corrosion cracking10.1515/JMBM.1996.7.1.1 ↗
52. Theorien der kristallplastizität und-festigkeit
53. Effect of electrochemical charging on the hydrogen embrittlement susceptibility of alloy 71810.1016/j.actamat.2019.08.020 ↗
54. Hydrofluoric Acid Corrosion Study of High-Alloy Materials
55. Computer solutions of Taylor analysis for axisymmetric flow
56. Neutron diffraction measurements of intergranular strains in MONEL-40010.1007/s11661-997-0014-9 ↗
57. Effect of Grain Size on Stress Corrosion of Type 302 Austenitic Stainless Steel10.5006/0010-9312-22.9.261 ↗
58. Effects of laser shock processing on stress corrosion cracking susceptibility of AZ31B magnesium alloy10.1016/j.surfcoat.2010.03.015 ↗
59. Effect of laser shock peening on the stress corrosion cracking of AZ31B magnesium alloy in a simulated body fluid10.1016/j.surfcoat.2016.12.093 ↗
60. Environmentally assisted cracking: Overview of evidence for an adsorption-induced localised-slip process10.1016/0001-6160(88)90113-7 ↗
61. Role of slip mode on stress corrosion cracking behavior10.1007/s11661-010-0471-4 ↗
62. SKFM observation of SCC on SUS304 stainless steel10.1016/j.corsci.2006.05.014 ↗
63. Enhanced cryogenic tensile properties through cryogenic cyclic plastic strengthening in a metastable austenitic stainless steel10.1016/j.scriptamat.2022.115024 ↗
64. Deformation mechanisms of CoCrFeMnNi high-entropy alloy under low-cycle-fatigue loading10.1016/j.actamat.2021.117089 ↗
65. The passivity of selective laser melted 316L stainless steel10.1016/j.apsusc.2019.144495 ↗
66. Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water10.1016/j.actamat.2018.11.046 ↗
67. Effect of machining-induced surface residual stress on initiation of stress corrosion cracking in 316 austenitic stainless steel10.1016/j.corsci.2016.03.008 ↗
68. Initiation of environmentally assisted cracking in high-temperature water10.5006/1.3278168 ↗