journal article·2021-04

Enhancing electrical properties of Cu2ZnSn(S,Se)4 thin films via trace Co incorporation

Jingying Zhang, Yanchun Yang, Guonan Cui, H. Alata, Yiming Wang, Chengjun Zhu

Publisher page

Abstract

Abstract Substitution of Zn2+ ionic by Co2+ ionic is known to suppress the cation disorder of Cu2ZnSn(S,Se)4 thin films, which is helpful to obtain the excellent Cu2ZnSn(S,Se)4 solar cell devices. In our work, the extra trace Co incorporation was added in the solution without affecting the compositions of other elements (i.e. Cu, Zn, and Sn) to enhance the electrical properties of Cu2ZnSn(S,Se)4 thin films. And Co incorporation does not enter into the lattice nor be found in the selenized films after taking effect, but increases the crystallinity, compactness, carrier concentration, and electrical properties of Cu2ZnSn(S,Se)4 thin films samples. By tuning the doping ratios of Co2+ ionic, the surface roughness of the selenized films can be decreased from 110.2 nm (0 mol %) to 68.90 nm (5 mol %). As 1 mol % of Co2+ ionic is doped, the carrier concentration of films can be also improved to 4.35 × 1017 cm−3 from 2.63 × 1016 cm−3, and average surface current of films applied 1 V AC voltage can be increased from 2.426 nA to 4.454 nA. The enhanced properties of Co-incorporated films brings hope for the excellent performance of Cu2ZnSn(S,Se)4 solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Device characteristics of CZTSSe thin film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
3. Theoretical investigation on enhancement of output performance of CZTSSe based solar cell10.1016/j.solener.2019.09.079 ↗
4. Screening of suitable cationic dopants for solar absorber material CZTS/Se: a first principles study10.1038/s41598-019-52410-3 ↗
5. Phase-separation induced crystal growth for large-grained Cu2ZnSn(S,Se)4 thin film10.1021/acsami.8b10749 ↗
6. Engineering solar cell absorbers by exploring the band alignment and defect disparity: the case of Cu- and Ag-based kesterite compounds10.1002/adfm.201502272 ↗
7. A versatile and low-toxic solution approach to binary, ternary, and quaternary metal sulfide thin films and its application in Cu2ZnSn(S,Se)4 solar cells10.1021/cm5002412 ↗
8. Band tail engineering in kesterite Cu2ZnSn(S,Se)4 thin-film solar cells with 11.8% efficiency10.1021/acs.jpclett.8b01433 ↗
9. Combinatorial exploration of the effects of intrinsic and extrinsic defects in Cu2ZnSn(S,Se)410.1109/JPHOTOV.2014.2361053 ↗
10. Analysis of the voltage losses in CZTSSe solar cells of varying Sn content10.1021/acs.jpclett.9b00506 ↗
11. Investigating the effect of sulphurization on volatility of compositions in Cu-poor and Sn-rich CZTS thin films10.1016/j.apsusc.2019.145043 ↗
12. The effect of Rb doping on CZTSSe solar cells10.1016/j.solener.2019.05.027 ↗
13. Tuning the band gap of Cu2ZnSn(S,Se)4 thin films via lithium alloying10.1021/acsami.5b11535 ↗
14. Complex interplay between absorber composition and alkali doping in high-efficiency kesterite solar cells10.1002/aenm.201701760 ↗
15. Coordination engineering of Cu-Zn-Sn-S aqueous precursor for efficient kesterite solar cells10.1016/j.scib.2020.01.005 ↗
16. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1−xSnS4 solar cell: effects of cadmium alloying10.1021/acsenergylett.7b00129 ↗
17. Cation substitution in earth-abundant kesterite photovoltaic materials
18. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells10.1039/C7EE01405H ↗
19. Formation of the front-gradient band gap in the Ag doped CZTSe thin films and solar cells10.1016/j.jechem.2019.03.026 ↗
20. Study and optimization of alternative MBE‐deposited metallic precursors for highly efficient kesterite CZTSe: Ge solar cells
21. Composition dependence of structure and optical properties of Cu2ZnSn(S,Se)4 solid solutions: an experimental study10.1016/j.jallcom.2011.08.099 ↗
22. Synthesis of Cu2(Zn1-xCox)SnS4 nanocrystals and formation of polycrystalline thin films from their aqueous dispersions10.1039/C7TA06295H ↗
23. Efficient optimization of the performance of Mn2+-doped kesterite solar cell: machine learning aided synthesis of high efficient Cu2(Mn,Zn)Sn(S,Se)4 solar cells
24. Reducing the interfacial defect density of CZTSSe solar cells by Mn substitution10.1039/C7TA09668B ↗
25. Electronic and optical properties of Cu2XSnS4 (X = Be, Mg, Ca, Mn, Fe, and Ni) and the impact of native defect pairs10.1063/1.4984115 ↗
26. Dip-coated Cu2CoSnS4 thin films from molecular ink for solar photovoltaics
27. Photovoltaic effect in earth abundant solution processed Cu2MnSnS4 and Cu2MnSn(S,Se)4 thin films10.1016/j.solmat.2016.07.006 ↗
28. A general strategy for synthesis of quaternary semiconductor Cu2MSnS4 (M = Co2+, Fe2+, Ni2+, Mn2+) nanocrystals10.1039/c2jm33574c ↗
29. Fabrication of a Cu2MnSn(S,Se)4 thin film based on a low-cost degradable solution process10.1039/C6CE00448B ↗
30. Structural, optical and magnetic properties of Cu2NiSnS4 thin films deposited by facile one-step electrodeposition10.1016/j.matlet.2015.12.054 ↗
31. Colloidal synthesis of wurtzite Cu2CoSnS4 nanocrystals and the photoresponse of spray-deposited thin films
32. A general water-based precursor solution approach to deposit earth abundant Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.jpowsour.2016.01.085 ↗
33. Highly efficient solution-processed CZTSSe solar cells based on a convenient sodium-incorporated post-treatment method10.1016/j.jechem.2019.03.029 ↗
34. Flexible CZTSSe thin film solar cells fabricated at low temperature with relieved residual stress by Sb incorporation10.1016/j.ceramint.2019.09.177 ↗
35. Nanoscale electrical property enhancement through antimony incorporation to pave the way for the development of low-temperature processed Cu2ZnSn(S,Se)4 solar cells10.1039/C8TA11783G ↗
36. Use of diffuse reflectance spectroscopy for optical characterization of un-supported nanostructures
37. Effect of tin concentration on the structural, optical and thermoelectric properties of CZTS thin films gown by chemical solution method10.1016/j.ceramint.2019.07.276 ↗
38. A simple and efficient solar cell parameter extraction method from a single current-voltage curve