Tuning of electrochemical and topographical characteristics for enhancement of anti-corrosion performance of hot-dip TiO2–Zn–(1 %)Al composite coatings
Source abstract
Abstract
Abstract The present study explores the assessment of anti-corrosion performance of hot-dip TiO2–Zn–(1 %)Al composite coatings developed on mild steel substrate through electrochemical and topographical evaluation. The electrochemical stability of intermetallic layers of composite coatings after chemical etching is analyzed by correlating topographical parameters from Tapping Mode Atomic Force Microscopy, equivalent circuit elements from Electrochemical Impedance Spectroscopy and potential distribution from Scanning Kelvin Probe Microscopy. The low roughness parameter, low potential difference, and high charge transfer resistance of the tuned composition of TiO2–Zn–(1 %)Al composite coating confirms its enhanced anti-corrosion performance and potential for practical application in marine fields.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Anodic Oxide Films and Nanostructures · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. A review on recent approaches in the field of hot dip zinc galvanizing process10.1016/j.surfcoat.2014.12.054 ↗
2. Exploration of Mo incorporated TiO2 composite for sustained biocorrosion control on zinc coating10.1016/j.apsusc.2019.07.086 ↗
3. Fabrication of inherent anticorrosion superhydrophobic surfaces on metals10.1021/acssuschemeng.8b00639 ↗
4. Bioinspired slippery zinc phosphate coating for sustainable corrosion protection10.1021/acssuschemeng.8b02345 ↗
5. Hot-dip galvanization with pulse-electrodeposited nickel pre-coatings10.1016/j.corsci.2010.09.031 ↗
6. Atmospheric corrosion of ZnAlMg coated steel during long term atmospheric weathering at different worldwide exposure sites10.1016/j.corsci.2018.12.033 ↗
7. Zinc coatings for hot sheet metal forming: comparison of phase evolution and microstructure during heat treatment10.1016/j.surfcoat.2011.03.002 ↗
8. Role of steel and zinc coating thickness in cut edge corrosion of coil coated materials in atmospheric weathering conditions; part 1: laboratory study10.1016/j.porgcoat.2016.06.013 ↗
9. Electrochemical and structural characterization of the mixed oxides-reinforced hot-dip zinc coating10.1016/j.surfcoat.2007.02.028 ↗
10. Assessment of the role of ζ-and δ-phases in ZrO2–Al2O3 composite based hot dip zinc galvanized coating by layer wise tuning10.1016/j.apsusc.2019.03.190 ↗
11. Morphology and properties of hot dip Zn–Mg and Zn–Mg–Al alloy coatings on steel sheet10.1016/j.surfcoat.2010.10.006 ↗
12. Nanoscopic view on the initial stages of corrosion of hot dip galvanized Zn–Mg–Al coatings10.1016/j.corsci.2014.02.027 ↗
13. Corrosion of zinc–magnesium coatings: mechanism of paint delamination10.1016/j.corsci.2009.05.042 ↗
14. Evolution of the surface chemistry of hot dip galvanized Zn–Mg–Al and Zn coatings on steel during short term exposure to sodium chloride containing environments10.1016/j.corsci.2014.11.033 ↗
15. Development of zinc oxide-rich inner layers in hot-dip zinc coating for barrier protection10.1016/j.surfcoat.2006.04.012 ↗
16. Fe-Zn reaction and its influence on microcracks during hot tensile deformation of galvanized 22MnB5 steel10.1016/j.surfcoat.2018.08.010 ↗
17. Heating rate effect on liquid Zn-assisted embrittlement of high Mn austenitic steel10.1016/j.surfcoat.2018.04.081 ↗
18. Resistance of diff ;erent Zn coatings at elevated temperature air environments10.1179/1743294414Y.0000000442 ↗
19. Development of nano TiO2-incorporated phosphate coatings on hot dip zinc surface for good paintability and corrosion resistance10.1016/j.apsusc.2010.10.125 ↗
20. Incorporation of TiO2 in hot dip zinc coating for efficient resistance to biogrowth10.1016/j.surfcoat.2005.04.058 ↗
21. Self cleaning behaviour of Ni/nano-TiO2 metal matrix composites10.1016/j.electacta.2013.04.174 ↗
22. Corrosion behaviour of 316L stainless steel and anti-corrosion materials in a high acidified chloride solution10.1016/j.apsusc.2014.09.205 ↗
23. Effect of nickel-rich barrier layer on improvement of hot-dip zinc coating10.1016/j.apsusc.2004.10.007 ↗
24. Improvement of hot-dip zinc coating by enriching the inner layers with iron oxide10.1016/j.apsusc.2005.05.012 ↗
25. Study on the behavior of additives in steel hot-dip galvanizing by DFT calculations10.1021/cm990790f ↗
26. Al2O3–ZrO2 mixed oxide composite incorporated aluminium rich zinc coatings for high wear resistance10.1016/j.corsci.2009.10.008 ↗
27. Evaluation of the corrosion behavior of galvannealed steel in chloride aqueous solution and in tropical marine environment10.1007/s10800-005-9083-x ↗
28. Preparation and corrosion resistance of a nanocomposite plasma electrolytic oxidation coating on Mg-1% Ca alloy formed in aluminate electrolyte containing titania nano-additives10.1016/j.jallcom.2016.07.081 ↗
29. In-situ electrochemical impedance measurements of corroding stainless steel in high subcritical and supercritical water10.1016/j.corsci.2019.01.017 ↗
30. Utilization of watermelon rind extract as a green corrosion inhibitor for mild steel in acidic media10.1016/j.jiec.2014.02.030 ↗
31. Corrosion inhibition of mild steel in hydrochloric acid by some pyridine derivatives: an experimental and quantum chemical study10.1016/j.jiec.2014.10.017 ↗
32. Corrosion inhibition effect of Aloe Vera gel: gravimetric and electrochemical study10.1016/j.jiec.2015.10.014 ↗
33. Electrochemical corrosion resistance performance of sustainable resource-based nanoconducting polymer composites in alkaline medium10.1007/s10008-014-2424-0 ↗
34. Tuning of hydrophobicity of WO3-based hot-dip zinc coating with improved self-cleaning and anti-corrosion properties10.1016/j.apsusc.2020.146762 ↗
35. One-step fabrication of bionic superhydrophobic coating on galvanised steel with excellent corrosion resistance10.1016/j.jallcom.2019.01.310 ↗
36. Orazem · 2008
37. The use of pre-treatments based on doped silane solutions for improved corrosion resistance of galvanized steel substrates10.1016/j.surfcoat.2005.01.044 ↗
38. Incorporation of ceramic nanocontainers into epoxy coatings for the corrosion protection of hot dip galvanized steel10.1016/j.corsci.2011.12.037 ↗
39. Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties10.1016/j.apsusc.2015.08.166 ↗
40. Preparation of superhydrophobic films on titanium as effective corrosion barriers10.1016/j.apsusc.2010.10.027 ↗
41. Zn wetted CeO2 based composite galvanization: an effective route to combat biofouling10.1021/acsabm.9b00404 ↗
42. Ranking high-quality paint systems using EIS. Part I: intact coatings10.1016/S0010-938X(02)00088-4 ↗
43. Effects of lanthanum addition on the microstructure and corrosion resistance of galvanized coating10.1016/j.jallcom.2019.01.075 ↗
44. AN SKP and EIS study of microporous nickel-chromium coatings in copper containing electrolytes10.1016/j.electacta.2019.05.108 ↗
45. The role of intermetallics on the corrosion initiation of twin roll cast AZ31 Mg alloy10.1149/2.0291509jes ↗
46. Analysis and modeling of the growth of intermetallic compounds in aluminum–steel joints10.1039/C7RA06354G ↗
47. CeO2–TiO2 mixed oxide incorporated high performance hot dip zinc coating10.1016/j.surfcoat.2010.10.067 ↗
48. Fabrication of self-cleaning superhydrophobic surface on aluminum alloys with excellent corrosion resistance10.1016/j.surfcoat.2015.07.002 ↗
49. Functional and smart coatings for corrosion protection: a review of recent advances10.1016/j.surfcoat.2014.06.031 ↗
50. Evaluation of self - healing ability in protective coatings modified with combinations of layered double hydroxides and cerium molibdate nanocontainers filled with corrosion inhibitors10.1016/j.electacta.2011.10.078 ↗
51. Self healing ability of inhibitor-containing nanocapsules loaded in epoxy coatings applied on aluminium 5083 and galvanneal substrates10.1016/j.electacta.2014.04.035 ↗
52. The combined use of scanning vibrating electrode technique and micro-potentiometry to assess the self-repair processes in defects on smart coatings applied to galvanized steel10.1016/j.electacta.2011.02.048 ↗
53. Experimental evaluation of new inorganic phosphites as corrosion inhibitors for carbon steel in saline water from oil source wells10.1016/j.desal.2016.01.019 ↗
54. The effect of zinc thickness on corrosion film breakdown of Colombian galvanized steel10.1088/1742-6596/935/1/012052 ↗
55. The effect of mechanical and electrochemical parameters on the tribocorrosion rate of stainless steel in sulphuric acid10.1016/S0043-1648(03)00085-1 ↗
56. Inferring fractal dimension of rough/porous surfaces-A comparison of SEM image analysis and electrochemical impedance spectroscopy methods10.1016/j.apsusc.2008.08.106 ↗