The evolution and oxidation of carbides in an Alloy 601 exposed to long term high temperature corrosion conditions
Source abstract
Abstract
Abstract Inconel 601 alloy has been studied after 2 years exposure in a commercial methanol plant. Carbon penetration leads to precipitation of nanometer-scale M23C6 and coarser M7Cr3, tens of microns below and within several microns of the alloy surface respectively, as predicted by thermodynamic calculations. Previously unreported M3C2−x precipitates form between the M23C6 and M7C3 in the C-concentration gradient and sometimes outcrop the surface. Carbides are Cr-rich, the smallest may contain Fe, orientated with respect to the matrix and oxidize when exposed to the corrosion product and synthesis gas. The Cr2O3 formed is not optimal for protection from carbon ingress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Metal Dusting10.1002/maco.200303729 ↗
2. On the mechanism of catastrophic carburization Metal dusting10.1016/0010-938X(93)90334-D ↗
3. Metal Dusting of high temperature alloys10.1002/maco.19930440306 ↗
4. Internal oxidation and carburization of heat-resistant alloys10.1016/S0010-938X(02)00182-8 ↗
5. Protection of high alloy steels against metal dusting by oxide scales10.1002/(SICI)1521-4176(199805)49:5<317::AID-MACO317>3.0.CO;2-5 ↗
6. Simultaneous oxidation and carburization of chromia forming alloys10.1016/j.ijhydene.2006.08.027 ↗
7. Metal Dusting of Fe–Cr and Fe–Ni–Cr Alloys Under Cyclic Conditions10.1023/A:1016032722703 ↗
8. The role of metal nanoparticles and nanonetworks in alloy degradation10.1038/nmat2227 ↗
9. An industrial experience of attack on metals by synthesis gas10.5006/0010-9312-15.12.16 ↗
10. Metal dusting failures in methane reforming plant10.1016/0308-0161(95)00089-5 ↗
11. Occurrence of metal dusting - referring to failure cases10.1002/maco.200303738 ↗
12. Role of alloying elements in steels on metal dusting10.1002/(SICI)1521-4176(199805)49:5<321::AID-MACO321>3.0.CO;2-P ↗
13. Metal dusting resistance of high chromium alloys10.1002/maco.200303732 ↗
14. Oxidation, carburization and metal dusting of 304 stainless steel in CO/CO2 and CO/H-2/H2O gas mixtures10.1016/j.corsci.2008.08.017 ↗
15. EMS–a software package for electron-diffraction analysis and HREM image simulation in materials science10.1016/0304-3991(87)90080-5 ↗
16. R. Kilaas R, MacTempas. Computer Software. Total Resolution, Mackintosh.
17. Thermo-Calc and DICTRA
18. Phase diagram calculations for Ni-based superalloys
19. Magnetic force microscopy and cross sectional transmission electron microscopy of carburized surfaces10.1016/j.cap.2003.11.034 ↗
20. Étude crystallographique des carbures Cr7C3 et Mn7C3
21. Hirsch · 1977
22. NaCl and filled Re3B-type structures for two metastable chromium carbides10.1080/13642819308220147 ↗
23. J.W. Steeds and J.F. Mansfield JF, Convergent beam analysis of alloy phases, Adam Hilger, Bristol, 1984.
24. Metal dusting on an alumina forming Ni-based alloy10.1016/j.corsci.2005.05.023 ↗
25. Micromechanisms of metal dusting on Fe-based and Ni-based alloys10.1002/(SICI)1521-4176(199805)49:5<309::AID-MACO309>3.0.CO;2-1 ↗
26. An active corrosion mechanism for metal dusting on 304L stainless steel10.1016/S0010-938X(02)00053-7 ↗
27. Microprocesses in nickel accompanying metal dusting10.1016/j.actamat.2007.09.010 ↗
28. Microprocesses of metal dusting corrosion on nickel and Ni-based alloys10.1002/srin.199701796 ↗
29. A model for high-temperature pitting corrosion in nickel-based alloys involving internal precipitation of Carbides oxides and graphite10.1007/s11661-008-9494-5 ↗
30. Metal dusting of nickel-based alloys10.1002/(SICI)1521-4176(199805)49:5<328::AID-MACO328>3.0.CO;2-Y ↗