Electrochemical characterization of localized corrosion mechanism of ALD Al2O3-coated copper for microelectronic application
Source abstract
Abstract
To achieve performance and reliability in microelectronics devices, copper interconnections must be protected from aggressive environment during the manufacturing process and throughout the life of the devices. Atomic Layer Deposition Al2O3 thin films has been used as a compatible layer with key integration process steps, as well as being corrosion-resistant in neutral media. However, electrochemical tests in aggressive environment have revealed that the alumina prematurely failed to protect copper from localized corrosion. In this study, local and global electrochemical techniques have been employed to evaluate the reactivity of copper at multiple scales and to elucidate the underlying corrosion mechanisms.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · Anodic Oxide Films and Nanostructures · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Lifetime prediction of Cu-Al wire bonded contacts for different mould compounds10.1109/ECTC.2014.6897318 ↗
2. On the intermetallic corrosion of Cu-Al wire bonds10.1109/EPTC.2010.5702706 ↗
3. Cu wire and Pd-Cu wire package reliability and molding compounds10.1109/ECTC.2012.6248975 ↗
4. The interface behavior of the Cu-Al bond system in high humidity conditions10.1109/EPTC.2010.5702699 ↗
5. Effect of wire size on the formation of intermetallics and Kirkendall voids on thermal aging of thermosonic wire bonds10.1016/j.matlet.2004.05.070 ↗
6. A review on the copper bond pad application in wire bond technique
7. Thermal strain and stress in copper thin films10.1016/0040-6090(95)05834-6 ↗
8. Murarka · 2000
9. Corrosion and layer formation of passive copper in alkaline solutions10.1002/maco.19840351104 ↗
10. Low temperature oxidation of copper alloys—AEM and AFM characterization10.1007/s10853-006-0351-x ↗
11. Improvement of oxidation resistance of copper by atomic layer deposition10.1016/j.apsusc.2012.06.090 ↗
12. Wire bonding to advanced copper, low-K integrated circuits, the metal/dielectric stacks, and materials considerations10.1109/TCAPT.2002.808008 ↗
13. Wirebond enhancement on copper palladium bonding in a over pad metalization
14. Mechanical reliability of Au and Cu wire bonds to Al, Ni/Au and Ni/Pd/Au capped Cu bond pads10.1016/j.microrel.2005.11.002 ↗
15. Thermosonic bonding of gold wire onto a copper pad with titanium thin-film deposition10.1007/s11664-004-0135-5 ↗
16. Mechanical issues of Cu-to-Cu wire bonding10.1109/TCAPT.2004.831745 ↗
17. Protection of copper corrosion by an ultrathin two-dimensional polymer film of alkanethiol monolayer10.1149/1.1838567 ↗
18. Direct gold and copper wires bonding on copper10.1016/S0026-2714(03)00074-X ↗
19. A brief review of atomic layer deposition: from fundamentals to applications10.1016/j.mattod.2014.04.026 ↗
20. Low-temperature atomic-layer-deposition lift-off method for microelectronic and nanoelectronic applications10.1063/1.1612904 ↗
21. Investigation of the defect density in ultra-thin Al2O3 films grown using atomic layer deposition10.1016/j.surfcoat.2010.12.001 ↗
22. Chemical stability of titania and alumina thin films formed by atomic layer deposition10.1021/acsami.5b03278 ↗
23. The mechanical properties of atomic layer deposited alumina for use in micro- and nano-electromechanical systems10.1016/j.sna.2006.01.029 ↗
24. Corrosion protection of copper using Al2O3, TiO2, ZnO, HfO2, and ZrO2 atomic layer deposition10.1021/acsami.6b13571 ↗
25. Use of electrochemical measurements to investigate the porosity of ultra-thin Al2O3 films prepared by atomic layer deposition10.1039/C4RA04565C ↗
26. Investigation of the corrosion behavior of atomic layer deposited Al2O3/TiO2 nanolaminate thin films on copper in 0.1 M NaCl10.3390/ma12040672 ↗
27. Ultra-thin Al2O3 films grown by atomic layer deposition for corrosion protection of copper10.1039/C4RA09179E ↗
28. Electrochemical and surface analysis of the corrosion protection of copper by nanometer-thick alumina coatings prepared by atomic layer deposition10.1149/2.0081508jes ↗
29. Grazing incidence specular reflectivity: theory, experiment, and applications10.1016/S1293-2558(00)00119-9 ↗
30. W. Watson, M.E. Orazem, EIS: Measurement Model Program, ECSarXiv, Sep. 16, 2020. doi:10.1149/osf.io/kze9x.10.1149/osf.io/kze9x ↗
31. CPE analysis by local electrochemical impedance spectroscopy10.1016/j.electacta.2005.02.128 ↗
32. Relationship between the resistivity profiles obtained from the power law model and the physico-chemical properties of passive films10.1149/1945-7111/abde84 ↗
33. Post Si(C)N hillock nucleation and growth in IC copper lines controlled by diffusional creep10.1016/j.mee.2009.08.003 ↗
34. Texture and grain boundary structure dependence of hillock formation in thin metal films10.1557/PROC-516-115 ↗
35. Effect of microstructure and anisotropy of copper on reliability in nanoscale interconnects10.1109/TDMR.2017.2655459 ↗
36. Enhanced graphical representation of electrochemical impedance data10.1149/1.2168377 ↗
37. Orazem · 2008
38. Dispersion and absorption in dielectrics I. Alternating current characteristics10.1063/1.1750906 ↗
39. Comparison of different methods for measuring the passive film thickness on metals10.1016/j.electacta.2015.12.173 ↗
40. Dielectric properties of thin films of aluminium oxide and silicon oxide10.1016/0040-6090(68)90002-3 ↗
41. Electrical characterization of thin Al2O3 films grown by atomic layer deposition on silicon and various metal substrates10.1016/S0040-6090(02)00438-8 ↗
42. Ueber das Verhalten sogenannter unpolarisirbarer Elektroden gegen Wechselstrom10.1002/andp.18993030302 ↗
43. Surface analysis of Cu coated with ALD Al2O3 and its corrosion protection enhancement in NaCl solution: EIS and polarization10.1088/2053-1591/ab1abd ↗
44. Failure mechanism of thin Al2O3 coatings grown by atomic layer deposition for corrosion protection of carbon steel10.1016/j.electacta.2011.07.104 ↗
45. Electrochemical corrosion of unalloyed copper in chloride media–-a critical review10.1016/S0010-938X(02)00257-3 ↗
46. Electrochemical behaviour of copper in neutral aerated chloride solution. I. Steady-state investigation10.1007/BF01093751 ↗
47. F. Dabosi, G. Beranger, B. Baroux, Corrosion localisée, les éditions de physique, 2012.
48. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
49. Anodic oxide films. Part 4.-The interpretation of impedance measurements on oxide coated electrodes on niobium10.1039/TF9555101250 ↗
50. The evaluation of experimental dielectric data of barrier coatings by means of different models10.1016/S0013-4686(01)00644-2 ↗
51. Model development methodology for localized corrosion of copper10.1016/j.corsci.2023.111388 ↗
52. The corrosion of copper in irradiated and unirradiated humid air10.1016/j.corsci.2018.05.024 ↗
53. Dielectric properties of materials showing constant-phase-element (CPE) impedance response10.1149/2.033306jes ↗