journal article·2023-12

High temperature oxidation behaviour of polycrystalline and single crystal Ta stabilized γ'-strengthened Co-Ni-Al-Ta-Cr alloys

Wenguo Xu, Yingju Li, Shasha Qu, Bingyu Lu, Cuiping Wang, Yuansheng Yang

Corrosion Science· Volume 225
Publisher page

Abstract

Isothermal oxidation was carried out on the polycrystalline and single crystal γ`-strengthened Co-Ni-Al-Ta-Cr alloys at 800–1000 ℃. The oxidation kinetic of both alloys follows logarithmic, cubic and parabolic law at 800 ℃, 900 ℃ and 1000 ℃, respectively. The polycrystalline alloy exhibits superior oxidation resistance at 800–1000 ℃, which can be explained by the effects of grain boundary. Grain boundary diffusion enhances the formation of the protective spinel oxides layer at 800–900 ℃. The beneficial effect of the grain boundary on the spallation resistance of oxides results that the polycrystalline alloy maintains better oxidation properties at 1000 ℃.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Wrought cobalt-base superalloys10.1007/BF02661736 ↗
2. Sims · 1972
3. Reed · 2006
4. Cobalt-base high-temperature alloys10.1126/science.1121738 ↗
5. Ductility enhancement by boron addition in Co-Al-W high-temperature alloys10.1016/j.scriptamat.2009.05.037 ↗
6. Improved high temperature γ′ stability of Co–Al–W-base alloys containing Ti and Ta10.1016/j.matlet.2013.09.023 ↗
7. Multicomponent γ′-strengthened Co-based superalloys with increased solvus temperatures and reduced mass densities10.1016/j.actamat.2018.01.034 ↗
8. Two steady-state creep stages in Co-Al-W-base single-crystal superalloys at 1273 K/137 MPa10.1007/s11661-018-4776-z ↗
9. High temperature oxidation of γ/γ′-strengthened Co-base superalloys10.1016/j.corsci.2011.02.033 ↗
10. Effect of Cr on the microstructure and oxidation properties of Co-Al-W superalloys studied by in situ environmental TEM10.1016/j.corsci.2019.108179 ↗
11. Effect of B and Cr on the high temperature oxidation behaviour of novel γ/γ′-strengthened Co-base superalloys10.1016/j.corsci.2011.04.020 ↗
12. The effect of nickel and silicon addition on some oxidation properties of novel Co-based high temperature alloys10.1016/j.corsci.2012.09.046 ↗
13. Effect of alloying on the oxidation behaviour of Co-Al-W superalloys10.1016/j.corsci.2014.03.002 ↗
14. High temperature oxidation behaviour of γ′-strengthened Co-based superalloys with different Ni addition10.1016/j.corsci.2019.05.036 ↗
15. Evolution of oxides and their microstructures at 800 °C in a γ-γ′ stabilised Co-Ni-Al-Mo-Ta superalloy10.1016/j.corsci.2019.02.013 ↗
16. Effect of Cr addition on the evolution of protective alumina scales and the oxidation properties of a Ta stabilized γ'-strengthened Co-Ni-Al-Mo-Ta-Ti alloy10.1016/j.corsci.2020.108683 ↗
17. The third-element effect in the oxidation of Ni-xCr-7Al (x=0, 5, 10 15 at%) alloys in 1 atm O2 at 900-1000 ℃10.1016/j.corsci.2006.03.008 ↗
18. Effect of Cr and Y2O3 on the oxidation behavior of Co-based oxide dispersion strengthened superalloys at 900 °C10.1016/j.corsci.2017.08.013 ↗
19. Microstructure and creep strength of different γ/γ′-strengthened Co-base superalloy variants10.1016/j.scriptamat.2010.08.036 ↗
20. Alloying effects in polycrystalline γ′ strengthened Co-Al-W base alloys10.1016/j.intermet.2013.10.022 ↗
21. Elemental partitioning, lattice misfit and creep behaviour of Cr containing γ′ strengthened Co base superalloys10.1179/1743284715Y.0000000112 ↗
22. Effects of Ni, Cr and W on the microstructural stability of multicomponent CoNi-base superalloys studied using CALPHAD and diffusion-multiple approaches10.1016/j.jmst.2020.10.080 ↗
23. Development of low-density γ/γ′ Co-Al-Ta-based superalloys with high solvus temperature10.1016/j.actamat.2020.02.049 ↗
24. The effect of grain boundaries on high temperature oxidation of new γ′-strengthened Co-Al-W-B superalloys10.1016/j.corsci.2013.10.022 ↗
25. Early stages of scale formation during oxidation of γ/γ′ strengthened single crystal ternary Co-base superalloy at 900 °C10.1016/j.corsci.2018.02.020 ↗
26. Modelling of the effect of grain boundary diffusion on the oxidation of Ni-Cr alloys at high temperature10.1016/j.corsci.2018.03.001 ↗
27. High-temperature oxidation behavior of additively manufactured IN625: Effect of microstructure and grain size10.1016/j.corsci.2022.110382 ↗
28. Influence of the microstructural homogeneity on the high-temperature oxidation behavior of a single crystalline Ni-base superalloy10.1016/j.scriptamat.2021.114301 ↗
29. High temperature oxidation behavior and mechanism of Al0.3CuCrFeNi2 high-entropy alloy with a coherent γ/γ' microstructure10.1016/j.corsci.2021.109984 ↗
30. Rosenqvist · 1974
31. Influence of Co to Ni ratio in γ′-strengthened model alloys on oxidation resistance and the efficacy of the halogen effect at 900 °C10.1016/j.corsci.2019.05.007 ↗
32. Selective oxidation and internal nitridation during high-temperature exposure of single-crystalline nickel-base superalloys10.1007/s11661-000-0051-0 ↗
33. Improving surface resistance to wear and corrosion of nickel‑aluminum bronze by laser-clad TaC/Co-based alloy composite coatings10.1016/j.surfcoat.2020.126592 ↗
34. Microstructure and wear resistance of laser-clad (Co, Ni)61.2B26.2Si7.8Ta4.8 coatings10.3390/met7100419 ↗
35. On the role of Ti aiding the protective barrier layer formation for γ′(L12)-strengthened Co-30Ni-10Al-5Cr-2Ta-2/4Ti superalloys10.1016/j.corsci.2021.109928 ↗
36. The effect of yttrium on oxide scale growth on Co-Al-W-based superalloys10.1016/j.corsci.2022.110674 ↗
37. Oxidation behavior of several chromia-forming commercial nickel-base superalloys10.1007/BF02134783 ↗
38. Oxidation behavior of a single-crystal Ni-base superalloy in air
39. A diffusion analysis of transient subsurface γ′-Ni3Al formation during β-NiAl oxidation10.1016/j.actamat.2012.06.021 ↗
40. A logarithmic law of metal oxidation which is controlled by a surface reaction10.1080/14786436908217798 ↗
41. Oxidation-kinetics of cobalt and cobalt iron-alloys at high-temperatures10.1007/BF00664799 ↗
42. The influence of CrTaO4 layer on the oxidation behavior of a directionally-solidified nickel-based superalloy at 850–900 °C10.1016/j.jallcom.2017.07.066 ↗
43. Influence of NiAl2O4 spinel formation on the oxidation behavior of the Ni50Al alloy at 1273 K in air10.1016/j.surfcoat.2019.125023 ↗
44. Two typical oxidation models on nickel-based superalloys under different initial surface roughness10.1016/j.corsci.2020.108942 ↗
45. Early stages of high-temperature oxidation of Ni- and Co-base model superalloys: A comparative study using rapid thermal annealing and advanced electron microscopy10.1016/j.corsci.2021.109744 ↗
46. Spinel-corundum phase equilibria in the systems Mn-Cr-Al-O and Co- Cr-Al-O at 1373 K10.1111/j.1151-2916.1986.tb07450.x ↗
47. Thermodynamic assessment of the CoOx–CrO1.5 system10.1016/j.jallcom.2009.05.135 ↗
48. Thermodynamics of Cr2O3, FeCr2O4, ZnCr2O4, and CoCr2O410.1016/j.jct.2007.03.001 ↗
49. Influence of grain size on tellurium corrosion behaviors of GH3535 alloy10.1016/j.corsci.2018.12.007 ↗
50. Mehrer · 2007
51. Modeling of the initial stages of reactive diffusion
52. Diffusion in Al-Ni and Al-NiCr interfaces at moderate temperatures10.4028/www.scientific.net/DDF.297-301.771 ↗
53. Diffusion in thin bilayer films during rapid thermal annealing10.1002/pssa.201431039 ↗
54. Revealing the effect of Al content on the oxidation of γ′-strengthened cobalt-based superalloys10.1016/j.corsci.2022.110122 ↗
55. Influence of grain size on the oxidation behavior of NbCr2 alloys at 950–1200 °C10.1016/j.corsci.2008.11.014 ↗
56. Creep relaxation and the spallation of oxide layers10.1016/S0257-8972(97)00471-4 ↗
57. The adhesion of alumina films to metallic alloys and coatings10.1002/(SICI)1521-4176(200005)51:5<358::AID-MACO358>3.0.CO;2-C ↗
58. Cyclic oxidation of high-temperature alloys10.1080/02670836.1987.11782264 ↗
59. Effect of Al content on the lifetime of thermally grown oxide formed on Ni-Al alloys after isothermal oxidation10.1016/j.corsci.2014.07.023 ↗
60. Stress effects in high temperature oxidation of metals10.1179/imr.1995.40.1.1 ↗