Ablation behavior and mechanism of SiCnw modified SiC-ZrC coating for graphite under a plasma ablation flame
Source abstract
Abstract
The intrinsic brittleness and low bonding strength of SiC-ZrC coatings to the graphite severely limit the ablation performance. Herein, SiC nanowires (SiCnw) were introduced between pre-oxidized graphite and coatings. The brittleness of coatings was reduced and the bonding strength was increased from 5.49 ± 0.88 MPa to 8.33 ± 0.65 MPa by SiCnw. Both simulation and experimental results show SiCnw also worked as thermal conduction channels to improve the ablation resistance. After plasma ablation for 120 s, the ablation rates of SiCnw/SiC-ZrC coated graphite were 0.315 mg/s and 0.217 µm/s, respectively, which are much lower than those of pure graphite and SiC-ZrC coated graphite.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Diamond and Carbon-based Materials Research · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A dense structure Si-SiC coating for oxidation and ablation protection of graphite fabricated by impregnation-pyrolysis and gaseous silicon infiltration10.1016/j.ceramint.2018.06.201 ↗
2. Oxidation protection of CrSi2-HfB2-SiC/SiC coating for graphite in variable-temperature environment10.1016/j.corsci.2022.110165 ↗
3. Thermal response, oxidation and ablation of ultra–high temperature ceramics, C/SiC, C/C, graphite and graphite–ceramics10.1016/j.jmst.2021.06.022 ↗
4. Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites10.1016/j.jeurceramsoc.2017.08.013 ↗
5. Effect of ZrC particle distribution on the ablation resistance of C/C-SiC-ZrC composites fabricated using precursor infiltration pyrolysis10.1016/j.ceramint.2020.03.157 ↗
6. The effect of carbon source addition order during sol-gel process on the properties of C/C–ZrC–SiC composites10.1016/j.ceramint.2021.09.080 ↗
7. Ablation mechanism of ZrB2-SiC coating for SiC-coated graphite under an oxyacetylene flame10.1016/j.surfcoat.2018.07.031 ↗
8. Multiphase composite Hf0.8Ti0·2B2–SiC–Si coating providing oxidation and ablation protection for graphite under different high temperature oxygen-containing environments10.1016/j.ceramint.2020.09.019 ↗
9. Effect of PyC-SiC double-layer interface on ablation behaviour of impacted CVD-SiCnws/HfC coating10.1016/j.corsci.2021.109741 ↗
10. Preparation of a double layer SiC coating and its oxidation resistance at 1773 K10.1016/j.corsci.2014.06.024 ↗
11. Chemical vapor deposition of TaC/SiC on graphite tube and its ablation and microstructure studies10.3390/coatings7070101 ↗
12. Surface morphology evolution and ablation mechanism of SiC–Si multiphase ceramic coating on graphite under oxy-acetylene flame10.1016/j.corsci.2014.08.008 ↗
13. Formation mechanism and supersonic flame erosion behavior of SiC and SiC-SiCnano single-layer oxidation protective coatings for carbon materials by reactive melt infiltration (RMI) method10.1016/j.corsci.2019.108136 ↗
14. Preparation and antioxidant mechanism of TiSi2–Si–SiC/SiC bilayer coating on matrix graphite10.1016/j.jallcom.2020.157721 ↗
15. Microstructure and ablation properties of SiC/ZrB2–SiC/ZrB2/SiC multilayer coating on graphite10.1016/j.jallcom.2018.12.045 ↗
16. The ablation behavior of ZrB2-SiC coating prepared by shrouded plasma spray on SiC-coated graphite10.1016/j.jallcom.2018.01.091 ↗
17. Evaluation of oxidation resistant SiC-ZrB2 composite interlayer for plasma sprayed Y2O3 coating over graphite10.1016/j.corsci.2021.109645 ↗
18. Preparation of MoSi2-SiB6 oxidation inhibition coating on graphite by spark plasma sintering method10.1016/j.surfcoat.2020.126511 ↗
19. Effect of HfB2 and WC additives on the ablation resistance of ZrB2–SiC composite coating manufactured by SPS10.1016/j.ceramint.2020.06.297 ↗
20. Oxidation behaviour of interlocking SiC–Si coating for graphite prepared by preoxidation and gaseous silicon infiltration process10.1016/j.ceramint.2022.04.083 ↗
21. Ablation resistance of ZrB2SiC/SiC coating prepared by pack cementation for graphite10.1016/j.jallcom.2016.04.010 ↗
22. Oxidation and ablation protection of double layer HfB2-SiC-Si/SiC-Si coating for graphite materials10.1016/j.jallcom.2018.12.256 ↗
23. Effect of SiC nanoparticles on in-situ synthesis of SiC whiskers in corundum–mullite–SiC composites obtained by carbothermal reduction10.1016/j.ceramint.2019.12.175 ↗
24. In-situ growth and relevant mechanisms of thick SiC nanowhiskers from hybrid silicon sources10.1016/j.jallcom.2020.157577 ↗
25. Fabrication of porous SiC nanostructured coatings on C/C composite by laser chemical vapor deposition for improving the thermal shock resistance10.1016/j.ceramint.2022.01.110 ↗
26. Improved thermal shock resistance of SiCnw/PyC core-shell structure-toughened CVD-SiC coating10.1016/j.jeurceramsoc.2018.02.017 ↗
27. A novel Hf Si O wire drawing phenomenon after ablation of SiCnws/HfC SiC coating on C/C composites
28. Catalyst-free growth of SiC nanowires in a porous graphite substrate by low pressure chemical vapor infiltration10.1016/j.ceramint.2014.04.024 ↗
29. SiC nanowire-induced fabrication of fine-grained and highly-density SiC coating by pressure-less reactive sintering10.1016/j.jallcom.2018.05.001 ↗
30. A crack-free SiC nanowire-toughened Si-Mo-W-C coating prepared on graphite materials for enhancing the oxidation resistance10.1016/j.surfcoat.2018.02.109 ↗
31. Platinum nanoparticles supported on electrochemically oxidized and exfoliated graphite for the oxygen reduction reaction10.1016/j.electacta.2018.12.057 ↗
32. Diffusion of cesium in oxidized and unoxidized IG-110 nuclear graphite10.1016/j.jnucmat.2022.153949 ↗
33. Effects of LaB6 on the microstructures and ablation properties of 3D C/C-SiC-ZrB2-LaB6 composites10.1016/j.jeurceramsoc.2020.02.024 ↗
34. Microstructure and ablation behavior of C/C–HfC composites prepared by precursor infiltration and pyrolysis10.1016/j.corsci.2015.01.053 ↗
35. Microstructure and ablation properties of La2O3 modified C/C-SiC composites prepared via precursor infiltration pyrolysis10.1016/j.jeurceramsoc.2018.11.041 ↗
36. Ablation behavior and thermal conduction mechanism of 3D ZrC–SiC-modified carbon/carbon composite having high thermal conductivity using mesophase-pitch-based carbon fibers and pyrocarbon as heat transfer channels10.1016/j.compositesb.2021.109201 ↗
37. Ablation behavior of (Zr,Ta)B2-SiC coating on carbon/carbon composites at 2300 °C10.1016/j.corsci.2021.109545 ↗
38. Microstructure and ablation behavior of Zr-Ti-Si-C multiphase coating fabricated by solid solution and in-situ reaction10.1016/j.corsci.2021.109852 ↗
39. Effect of processing parameters on microstructure and ablation behavior of SiC/ZrB2 coating for graphite10.1111/ijac.13484 ↗
40. Resistance to oxidation and ablation of SiC coating on graphite prepared by chemical vapor reaction10.1016/j.corsci.2013.05.009 ↗