Effect of the microstructure of corrosion products on tribo-corrosion performance of HVOF-sprayed NiCrWMoCuCBFe coating
Source abstract
Abstract
The work investigated tribo-corrosion performance of NiCrWMoCuCBFe coating in corrosive environments and deionized water. Its purpose was to analyze the effect of microstructure of corrosion products on corrosive wear performance. The results show that the corrosion resistance of this coating in HCl solution was the worst while its wear performance was better due to the generation of corrosion products. The tribological properties of coating was poor in NaOH solution. The reason was that cracks gradually penetrated into the corrosion products film, leading a lot of corrosion products exfoliated from the worn coating surface under the repeated action of friction.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Corrosive wear failure analysis in a natural gas pipeline10.1016/j.wear.2007.01.123 ↗
2. Coatings resistant to erosive/corrosive and severe environments10.1016/0257-8972(93)90284-U ↗
3. Y.I. Korobov, S.B. Muhambetov, N.N. Laskov, I.E. Shveikin, V.K. Chernykh, Financial losses of electric power industry, caused by corrosion wear designs lighting poles, IOP Conference Series: Materials Science and Engineering, 537 (2019).10.1088/1757-899X/537/6/062082 ↗
4. Tribological behaviours of PVD TiN and TiCN coatings in artificial seawater10.1016/j.surfcoat.2013.03.034 ↗
5. A study of sand slurry erosion of W-alloy white cast irons10.1016/0043-1648(93)90429-P ↗
6. An assessment of tribological performance on NiCoCrAlYTa coating under corrosive environments10.1016/j.triboint.2017.05.022 ↗
7. Corrosion reduces wet abrasive wear of structural steel10.1016/j.scriptamat.2015.05.028 ↗
8. Tribo-corrosion behaviors of Ti3SiC2/Si3N4 tribo-pair in hydrochloric acid and sodium hydroxide solutions10.1016/j.wear.2011.08.007 ↗
9. Tribocorrosion behavior of Ti3SiC2 in the dilute and concentrated sulfuric acid solutions10.1016/j.wear.2010.03.007 ↗
10. Assessing the tribocorrosion performance of three different nickel-based superalloys10.1007/s11249-009-9552-1 ↗
11. Influence of microstructure evolution on tribocorrosion of 304SS in artificial seawater10.1016/j.corsci.2014.07.062 ↗
12. The effects of microstructures and repassivation kinetics on the tribocorrosion resistance of ferrite and ferrite-martensite stainless steels10.1016/j.wear.2018.10.023 ↗
13. Friction and wear behaviors of biodegradable Mg-6Gd-0.5Zn-0.4Zr alloy under simulated body fluid condition10.1016/j.jma.2017.11.002 ↗
14. Accelerated deterioration mechanism of 316L stainless steel in NaCl solution under the intermittent tribocorrosion process10.1016/j.jmst.2022.01.011 ↗
15. Investigation of the synergism of wear and corrosion using an electrochemical scratch technique10.1023/A:1016771419918 ↗
16. Effect of Cl− on the corrosive wear of AISI 321 stainless steel in H2SO4 solution10.1007/BF02711188 ↗
17. Tribocorrosion behavior of 2205 duplex stainless steel in sodium chloride and sodium sulfate environments10.1007/s11249-022-01601-7 ↗
18. Methods of measuring wear-corrosion synergism10.1016/0043-1648(94)07108-X ↗
19. Corrosive wear behaviour of 304 L stainless steel in 1 NH2SO4 solution part 2. Effect of chloride ion concentration10.1016/0043-1648(91)90119-F ↗
20. Correlation between repassivation kinetics and corrosion rate over a passive surface in flowing slurry10.1016/j.electacta.2008.02.083 ↗
21. Modeling the multi-degradation mechanisms of combined tribocorrosion interacting with static and cyclic loaded surfaces of passive metals exposed to seawater10.1016/j.wear.2010.06.010 ↗
22. Sliding tribocorrosion behavior of Fe-based bulk metallic glass under corrosive environments10.1016/j.jnoncrysol.2018.12.024 ↗
23. Tribological behaviors of an ultrahigh strength Cu–15Ni–8Sn–0.2Y alloy sliding against TC6 titanium alloy in deionized water and seawater10.1007/s11249-019-1262-8 ↗
24. Review of engineered tribological interfaces for improved boundary lubrication10.1016/j.triboint.2004.08.008 ↗
25. Ni–TiO2 nanocomposite coating with high resistance to corrosion and wear10.1016/j.surfcoat.2010.04.061 ↗
26. The corrosive wear of nickel coating on mild steel10.1007/BF00356004 ↗
27. Tribochemical behavior of alumina coatings deposited by high-velocity oxy fuel spraying10.1016/j.ceramint.2015.01.002 ↗
28. Experimental investigation on effect of water jet erosion parameters on HVOF sprayed Cr3C2-NiCr coatings on stainless steel: a mathematical approach10.1088/1402-4896/ac64d5 ↗
29. A study on corrosion and corrosion-wear behavior of Fe-based amorphous alloy coating prepared by high velocity oxygen fuel method10.1016/j.jmrt.2021.10.103 ↗
30. Cr3C2–NiCr and WC–Ni thermal spray coatings as alternatives to hard chromium for erosion–corrosion resistance10.1016/j.surfcoat.2007.06.048 ↗
31. Effect of post-heat treatment on the corrosion resistance of NiWCrBSi HVOF coatings in chloride solution10.1361/105996302770349023 ↗
32. Considering impact and corrosion resistance in the performance of heavy wear resistant coatings10.1007/s11837-020-04390-3 ↗
33. FeCrMoWCBY metallic glass with high corrosion resistance in molten lead–bismuth eutectic alloy10.1016/j.corsci.2021.109688 ↗
34. Passivation characteristics of ultra-thin 316L foil in NaCl solutions10.1016/j.jmst.2022.01.043 ↗
35. Molybdenum addition enhancing the corrosion behaviors of 316 L stainless steel in the simulated cathodic environment of proton exchange membrane fuel cell10.1016/j.ijhydene.2015.01.165 ↗
36. Crystallization behaviors and microhardness of sputtered Ni–P, Ni–P–Cr and Ni–P–W deposits on tool steel10.1016/S0257-8972(03)00851-X ↗
37. Studies on electrochemical deposition and physicochemical properties of nanocrystalline Ni–Mo alloys10.1016/j.surfcoat.2017.03.036 ↗
38. The interaction mechanism of cavitation erosion and corrosion on HVOF sprayed NiCrWMoCuCBFe coating in artificial seawater10.1016/j.apsusc.2020.146499 ↗
39. Preparation and mechanical properties of NiCrWMoCuCBFe coatings
40. Correlation between particle size and porosity of Fe-based amorphous coating10.1080/02670844.2018.1447782 ↗
41. Effect of particle state on the adhesive strength of HVOF sprayed metallic coating10.1361/105996302770348655 ↗
42. Thermodynamics of corrosion
43. Effect of calcium ions on pitting corrosion and inhibition performance in CO2 corrosion of N80 steel10.1016/j.corsci.2005.12.002 ↗
44. Influence of concentrations of chloride ions on electrochemical corrosion behavior of titanium-zirconium-molybdenum alloy10.1016/j.jallcom.2017.03.025 ↗
45. Tribological behavior of lamellar molybdenum trioxide as a lubricant additive10.3390/ma11122427 ↗
46. Microstructure and tribological properties of plasma-sprayed chromium oxide–molybdenum oxide composite coatings10.1016/S0257-8972(02)00613-8 ↗
47. Can we enhance passivity with a surface finish? Spectroscopic and electrochemical analysis on 316L stainless steel10.1149/1945-7111/ac4bf7 ↗
48. Microstructure, wear and electrochemical behaviors of laser cladding Fe-based coatings with various molybdenum contents
49. Micro abrasion-corrosion of ferritic stainless steels10.1016/j.wear.2017.01.083 ↗
50. Tribocorrosion behavior of Ni-17.5Si-29.3Cr alloy in sulfuric acid solution10.1016/j.triboint.2009.03.004 ↗
51. Corrosion and wear behavior of laser cladded Ni–WC coatings10.1016/j.surfcoat.2015.06.039 ↗
52. Tribo-corrosion behaviour of chromium carbide based coatings deposited by HVOF10.1016/j.surfcoat.2014.10.007 ↗