journal article·2020-09

Comparison on electrochemical corrosion performances of arc and laser thermal sprayed Al–Ti–Ni coatings in marine environment

Chen Haixiang, Kong Dejun

Publisher page

Abstract

Abstract Al–Ti–Ni coatings were fabricated on S355 structural steel using an arc spraying (AS) and laser thermal spraying (LTS), and their electrochemical corrosion performances in 3.5% NaCl, 0.1 M H2SO4 and 0.1 M NaOH solutions were comparatively investigated. The results show that the obtained coatings are composed of crystalline and amorphous phases, and the metallurgical bonding is formed at the interface of laser thermal sprayed coating. The polarization resistance Rp and charge transfer resistance Rct of laser thermal sprayed coating are higher than those of arc sprayed coating in 3.5% NaCl, 0.1 M H2SO4 and 0.1 M NaOH solutions, while the corrosion current density jcorr is opposite, its electrochemical corrosion resistance is better than the arc sprayed coating. The Rp and Rct of laser thermal sprayed coating in 0.1 M NaOH solution are the highest among the three kinds of solutions, showing the highest electrochemical corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Annealing behavior of aluminum coating prepared by arc spraying on P355NL1 steel10.1016/j.surfcoat.2017.09.073 ↗
2. Thermo–electrical properties of the alumina coatings deposited by different thermal spraying technologies10.1016/j.ceramint.2017.08.080 ↗
3. In–situ synthesis of novel Al–Fe–Si metallic glass coating by arc spraying10.1016/j.jallcom.2017.05.032 ↗
4. Electrochemical corrosion behavior of 2A02 Al alloy under an accelerated simulation marine atmospheric environment10.1016/j.jmst.2018.09.060 ↗
5. Electrochemical corrosion behaviors of aluminum–based marine coatings in the presence of Escherichia coli bacterial biofilm10.1016/j.matchemphys.2016.01.038 ↗
6. Pore blocking characteristics of corrosion products formed on Aluminum coating produced by arc thermal metal spray process in 3.5 wt.% NaCl solution10.1016/j.conbuildmat.2016.03.135 ↗
7. Role of late transition metals on pitting resistance of Zr–Ti–(Cu,Ni,Co)–Al bulk metallic glasses in 0.6 M NaCl aqueous solution10.1016/j.jmst.2017.04.010 ↗
8. Influence of the high–velocity oxygen–fuel spray parameters on the porosity and corrosion resistance of iron–based amorphous coatings10.1016/j.surfcoat.2019.03.046 ↗
9. Corrosion, erosion and wear behavior of complex concentrated alloys: a review
10. Corrosion behavior of Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high–entropy in aqueous chloride solution10.1016/j.elecom.2018.11.009 ↗
11. Mechanical and corrosion properties of Al/Ti film on magnesium alloy AZ31B10.1007/s11706-015-0272-1 ↗
12. Microstructure and fatigue damage mechanism of Fe–Co–Ni–Al–Ti–Zr high–entropy alloy film by nanoscale dynamic mechanical analysis10.1016/j.vacuum.2018.10.061 ↗
13. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
14. Corrosion behaviour and galvanic coupling with steel of Al–based coating alternatives to electroplated cadmium10.1016/j.matchemphys.2013.04.035 ↗
15. Effects of laser power on immersion corrosion and electrochemical corrosion performances of laser thermal sprayed amorphous AlFeSi coatings10.1016/j.apsusc.2019.03.047 ↗
16. Cored–wire arc spray fabrication of novel aluminium–copper coatings for anti–corrosion/fouling hybrid performances10.1016/j.surfcoat.2018.10.094 ↗
17. Influence of calcium nitrate on morphology and corrosion characteristics of ammonium phosphate treated Aluminum coating deposited by arc thermal spraying process10.1016/j.corsci.2018.10.035 ↗
18. Influence of sealing treatment on the corrosion behavior of HVAF sprayed Al–based amorphous/nanocrystalline coating10.1016/j.surfcoat.2018.08.086 ↗
19. Microstructure and mechanical properties of Co–based alloy coatings fabricated by laser cladding and plasma arc spray welding10.1016/j.jallcom.2019.01.056 ↗
20. The effect of residual stress on the electrochemical corrosion behavior of Fe–based amorphous coatings in chloride–containing solutions10.1016/j.surfcoat.2016.05.034 ↗
21. Synthesis of nanocrystalline intermetallic compounds in Ni–Ti–Al system by mechanothermal method10.1016/j.jallcom.2009.10.169 ↗
22. Novel method to fabricate Ti–Al intermetallic compound coatings on Ti–6Al–4V alloy by combined ultrasonic impact treatment and electrospark deposition10.1016/j.jallcom.2014.12.144 ↗
23. Influence of nitrogen ion implantation on corrosion behavior of Zr55Cu30Ni5Al10 amorphous alloy10.1016/j.jnoncrysol.2019.02.009 ↗
24. Al2O3 nanoparticles reinforced Fe–Al laser cladding coatings with enhanced mechanical properties10.1016/j.jallcom.2018.04.266 ↗
25. The effect of Al content on the galvanic corrosion behavior of coupled Ni/graphite and Ni–Al coatings10.1016/j.corsci.2011.02.019 ↗
26. Effect of phase composition and microstructure on the corrosion resistance of Ni–Al intermetallic compounds10.1016/j.jallcom.2016.11.138 ↗
27. Evaluation of corrosion resistance of aluminium coating with and without annealing against molten carbonate using electrochemical impedance spectroscopy10.1016/j.jpowsour.2014.03.076 ↗
28. Corrosion mechanism of Al, Al–Zn and Al–Zn–Sn alloys in 3wt.% NaCl solution10.1016/j.corsci.2014.07.018 ↗
29. Corrosion performance of high pressure die–cast Al–Si–Mg–Zn alloys in 3.5 wt% NaCl solution10.1016/j.jallcom.2018.12.313 ↗
30. Deposition of Ni–Al coatings by pack cementation and corrosion resistance in high temperature and marine environments10.1016/j.corsci.2018.11.003 ↗
31. Insitu growth of durable superhydrophobic Mg–Al layered double hydroxides nanoplatelets on aluminum alloys for corrosion resistance10.1016/j.jallcom.2018.07.086 ↗
32. Corrosion characteristics and wear performance of cold sprayed coatings of reinforced Al deposited onto friction stir welded AA2024–T3 joints10.1016/j.surfcoat.2018.06.058 ↗
33. Long–term atmospheric corrosion of aluminum alloy 2024–T4 in coastal environment: surface and sectional corrosion behavior10.1016/j.jallcom.2019.03.028 ↗
34. Effects of coverage layer on the electrochemical corrosion behavior of Mg–Al–Mn alloy subjected to massive laser shock peening treatment10.1016/j.jallcom.2018.12.224 ↗
35. Preparation of MgAl layered double hydroxides intercalated with nitrite ions and corrosion protection of steel bars in simulated carbonated concrete pore solution10.1016/j.corsci.2019.03.007 ↗
36. The analysis of electrode impedances complicated by the presence of a constant phase element
37. Effects of Al2O3 on the microstructures and corrosion behavior of low–pressure cold gas sprayed Al 2024–Al2O3 composite coatings on AA 2024–T3 substrate10.1016/j.surfcoat.2019.04.082 ↗
38. Electrochemical corrosion of Ti–Al2O3 biocomposites in Ringer's solution10.1016/j.jallcom.2018.09.313 ↗
39. Kinetics of corrosion inhibition of aluminum in acidic media by water–soluble natural polymeric chondroitin–4–sulfate as anionic polyelectrolyte inhibitor10.1016/j.carbpol.2018.03.066 ↗
40. Effect of surface abrasion on pitting corrosion of Al–Li alloy10.1016/j.corsci.2018.04.010 ↗
41. The formation and dissolution of anodic oxide films on pure aluminium in alkaline solution10.1016/S0013-4686(98)00368-5 ↗
42. Performance of Al−1Mg−1Zn−0.1Ga−0.1Sn as anode for Al–air battery10.1016/j.electacta.2014.02.080 ↗
43. Electrochemical polarization and corrosion behavior of Al–Zn–In based alloy in acidity and alkalinity solutions10.1016/j.ijhydene.2013.09.046 ↗
44. Comparison of corrosion behaviour of zinc in NaCl and in NaOH solutions; Part II: electrochemical analyses10.1016/j.corsci.2010.08.018 ↗