Mechanical integrity of corrosion product films on rotating cylinder specimens
Source abstract
Abstract
Rotating cylinder (RC) technique is widely used for flow corrosion testing. However, this test configuration has limitations. Particularly, integrity of corrosion products films formed on the RC surface can be affected. The objective of this work is to show how intense the stresses in corrosion product films can be at high rotation speeds. In such cases, failure of the films is possible due to inertial forces rather than other factors, such as flow, leading to erroneous results. Consequently, theoretical calculation of stresses in films has been performed and a case of corrosion product film failure assessed using a fracture mechanics approach.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. An electrochemical model for prediction of corrosion of mild steel in aqueous carbon dioxide solutions10.5006/1.3293640 ↗
2. Protective iron carbonate films—Part 1: Mechanical removal in single-phase aqueous flow10.5006/1.3278279 ↗
3. Protective iron carbonate films—Part 3: Simultaneous chemo-mechanical removal in single-phase aqueous flow10.5006/1.3278425 ↗
4. Protective iron carbonate films—Part 2: Chemical removal by dissolution in single-phase aqueous flow10.5006/1.3280674 ↗
5. Rotating cylinder electrode for velocity sensitivity testing10.5006/1.3581945 ↗
6. Rotating cylinder electrode — geometry relationships for prediction of velocity-sensitive corrosion10.5006/1.3582024 ↗
7. Comparison of rotation cylinder and loop methods for testing CO2 corrosion inhibitors10.1179/bcj.1997.32.4.269 ↗
8. Inhibition of CO2 corrosion of carbon steel with 1% Cr10.1016/j.matchemphys.2012.08.055 ↗
9. Rings, discs and cylinders subjected to rotation and thermal gradients
10. Ionic mass transfer and concentration polarization at rotating electrodes10.1149/1.2781252 ↗
11. Experiments on drag of revolving disks, cylinders and streamline rods at high speeds
12. Flow field characterization of a rotating cylinder10.1016/j.ijheatfluidflow.2008.04.008 ↗
13. Prediction of the Poisson’s ratio of porous materials10.1007/BF00357876 ↗
14. P–V–T equation of state of siderite to 33 GPa and 1673 K10.1016/j.pepi.2013.07.011 ↗
15. Effects of Mg-Fe2+ substitution in calcite-structure carbonates: thermoelastic properties10.2138/am-1998-3-411 ↗
16. The volume expansion accompanying the martensite transformation in Iron–Carbon alloys10.1007/BF02642308 ↗
17. Crack patterns in thin films10.1016/S0022-5096(99)00081-2 ↗
18. First-principles calculations of the electronic structure and pressure-induced magnetic transition in siderite FeCO310.1103/PhysRevB.78.155119 ↗
19. Mechanical properties of CO2 corrosion product scales and their relationship to corrosion rates10.1016/j.corsci.2008.07.016 ↗
20. Undestanding localized CO2 corrosion of carbon steel from physical properties of iron carbonate scales
21. The fracture toughness of CO2 corrosion scale in pipeline steel10.1016/j.matlet.2005.01.014 ↗
22. The relationship between fracture toughness of CO2 corrosion scale and corrosion rate of X65 pipeline steel under supercritical CO2 condition10.1016/j.ijggc.2011.09.011 ↗
23. Mechanical properties of CO2 corrosion scale formed at different temperatures and their relationship to corrosion rate10.1179/1743278211Y.0000000023 ↗
24. Three-dimensional effects in thin film fracture mechanics10.1016/0167-6636(92)90037-E ↗