Characterization and biological properties of nanostructured clinoenstatite scaffolds for bone tissue engineering applications
Source abstract
Abstract
Abstract With the enhancement of bone-tissue regeneration technologies, there is an increment request for perfect bio-ceramic scaffolds with multifunctional properties, including high mechanical strength as well as biological and controlled drug-release potential. In the present work, extremely porous clinoenstatite (CLEN; MgSiO3) scaffolds with different micropore sizes and great interconnectivity were fabricated for the first time via the space holder method and subsequent sintering. The NaCl particle size escalation as spacer results in an increase of the pore size and interconnectivity and reduction of the compressive strength. According to the results, nanostructured CLEN scaffolds contain pore sizes in the range of ~450–650 μm and porosity more than ~77–81%, which offered greater compressive strength (0.9 MPa) in comparison with the other CLEN scaffolds. Favorable burst release was noticed throughout the first 8 h, and right after the early burst, the dose was progressively reduced until 35 h, and subsequently, a sustained release was noticed. In vitro examinations verified the antimicrobial performance of the metronidazole (MTZ)-embedded CLEN scaffolds towards the Fusobacterium nucleatum (Fn) and Aggregatibacter actinomycetemcomitans (Aa) bacteria. In this context, the antibacterial performance is enhanced with escalating MTZ loading into scaffolds, which is directly linked with the increase of MTZ concentration. The results exhibited that both CLEN and MTZ-embedded CLEN scaffolds presented apatite formation capability in SBF. The biological test showed that the MG63 cell adhesion and proliferation on the CLEN scaffold were comparable with their counterpart loaded with low MTZ concentration. Also, the scaffold's ALP activity with low MTZ concentration was considerably greater than that of the scaffold with high MTZ concentration. The results presented here demonstrate that the fabricated CLEN scaffold with 1–3 wt% MTZ concentration has a great potential to be utilized as a bone repair material for tissue engineering applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Magnesium-containing bioactive polycrystalline silicate-based ceramics and glass-ceramics for biomedical applications10.1016/j.cossms.2014.02.004 ↗
2. Design and characterization of calcium phosphate ceramic scaffolds for bone tissue engineering10.1016/j.dental.2015.09.008 ↗
3. Multifunctional calcium carbonate microparticles: synthesis and biological applications10.1039/c0jm01231a ↗
4. Magnesium, iron and zinc alloys, the trifecta of bioresorbable orthopaedic and vascular implantation-a review
5. Nanoporous metals for biodegradable implants: initial bone mesenchymal stem cell adhesion and degradation behavior10.1002/jbm.a.35707 ↗
6. Nanoporous metals for biodegradable implants: initial bone mesenchymal stem cell adhesion and degradation behavior10.1002/jbm.a.35707 ↗
7. Scaffolds for bone tissue engineering: state of the art and new perspectives10.1016/j.msec.2017.05.017 ↗
8. Improving bioactivity of inert bioceramics by a novel Mgincorporated solution treatment10.1016/j.apsusc.2017.07.009 ↗
9. In vitro evaluation of Zeolite-nHA blended PCL/PLA nanofibers for dental tissue engineering10.1016/j.matchemphys.2020.123152 ↗
10. Synthesis and characterization of hydroxyapatite-alginate nanostructured composites for the controlled drug release10.1016/j.matchemphys.2018.06.071 ↗
11. Biotemplated synthesis of metallic nanoparticle chains on an α-synuclein fiber scaffold10.1166/jnn.2008.16343 ↗
12. Biotemplated silica and titania nanowires: synthesis, characterization and potential applications10.1166/jnn.2012.5128 ↗
13. In vivo evaluation of biodegradability and biocompatibility of Fe30Mn alloy
14. Surface modifications through dealloying of Fe–Mn and Fe–Mn–Zn alloys developed to create tailorable, nanoporous, bioresorbable surfaces10.1016/j.actamat.2015.10.002 ↗
15. Synthesis of novel nanostructured bredigite–amoxicillin scaffolds for bone defect treatment: cytocompatibility and antibacterial activity10.1007/s10971-018-4606-1 ↗
16. Porous diopside (CaMgSi2O6) scaffold: a promising bioactive material for bone tissue engineering10.1016/j.actbio.2009.12.022 ↗
17. Preparation and characterization of clinoenstatite bioceramics10.1111/j.1551-2916.2010.04032.x ↗
18. Synthesis methods for nanosized hydroxyapatite with diverse structures10.1016/j.actbio.2013.04.012 ↗
19. The incorporation of strontium and zinc into a calcium–silicon ceramic for bone tissue engineering10.1016/j.biomaterials.2010.01.024 ↗
20. Antibacterial forsterite (Mg2SiO4) scaffold: a promising bioceramic for load bearing applications
21. Porous bioactive diopside (CaMgSi2O6) ceramic microspheres for drug delivery10.1016/j.actbio.2009.09.025 ↗
22. Analytical and experimental analyses for mechanical and biological characteristics of novel nanoclay bio-nanocomposite scaffolds fabricated via space holder technique10.1016/j.clay.2018.08.013 ↗
23. Hardystonite-diopside nanocomposite scaffolds for bone tissue engineering applications10.1016/j.matchemphys.2017.09.018 ↗
24. Multifunctional bioactive glass and glass-ceramic biomaterials with antibacterial properties for repair and regeneration of bone tissue10.1016/j.actbio.2017.06.046 ↗
25. Clinoenstatite coatings have high bonding strength, bioactive ion release, and osteoimmunomodulatory effects that enhance in vivo osseointegration10.1016/j.biomaterials.2015.08.027 ↗
26. Fabrication and characterization of a new, strong and bioactive ceramic scaffold for bone regeneration10.1016/j.matlet.2013.06.046 ↗
27. Sr-doped forsterite nanopowder: synthesis and biological properties10.1016/j.ceramint.2017.06.054 ↗
28. Scaffold-based regeneration of skeletal tissues to meet clinical challenges10.1039/C4TB01073F ↗
29. Apatite derived three dimensional (3D) porous scaffolds for tissue engineering applications10.1016/j.matchemphys.2019.122456 ↗
30. Glucose cross-linked hydrogels conjugate HA nanorods as bone scaffolds: green synthesis, characterization and in vitro studies10.1016/j.matchemphys.2019.122515 ↗
31. Synthesis and characterization of nanostructured forsterite scaffolds using two step sintering method10.1016/j.jallcom.2014.05.032 ↗
32. Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds10.1016/j.actbio.2019.04.012 ↗
33. Biomimetic porous scaffolds for bone tissue engineering10.1016/j.mser.2014.04.001 ↗
34. Novel nanostructured baghdadite-vancomycin scaffolds: in-vitro drug release, antibacterial activity and biocompatibility10.1016/j.matlet.2017.08.027 ↗
35. A new multifunctional monticellite-ciprofloxacin scaffold: preparation, bioactivity, biocompatibility, and antibacterial properties10.1016/j.matchemphys.2018.09.054 ↗
36. Fabrication and characterization of nanostructure diopside scaffolds using the space holder method: effect of different space holders and compaction pressures10.1016/j.matdes.2015.11.078 ↗
37. Ceramic scaffolds with immobilized vancomycin-loaded poly(lactide-co-glycolide) microparticles for bone defects treatment10.1016/j.matlet.2016.12.113 ↗
38. Hydroxyapatite microporous bioceramics as vancomycin reservoir: antibacterial efficiency and biocompatibility investigation10.1177/0885328216653108 ↗
39. Effect of pretreatment process of B4C powder on the surface properties and freeze-cast porous ceramics10.1016/j.matchemphys.2020.123209 ↗
40. Novel metronidazole–chalcone conjugates with potential to counter drug resistance in Trichomonas vaginalis10.1016/j.ejmech.2014.03.076 ↗
41. Metronidazole resistance and nim genes in anaerobes: a review10.1016/j.anaerobe.2018.10.004 ↗
42. A strawberry-like Ag-decorated barium titanate enhances piezoelectric and antibacterial activities of polymer scaffold10.1016/j.nanoen.2020.104825 ↗
43. Metal organic frameworks as a compatible reinforcement in a biopolymer bone scaffold10.1039/C9QM00772E ↗
44. Bone biomaterials and interactions with stem cells10.1038/boneres.2017.59 ↗
45. Simultaneous enhancement of vascularization and contact-active antibacterial activity in diopside-based ceramic orbital implants10.1016/j.msec.2019.110036 ↗
46. Antibacterial polymer scaffold based on mesoporous bioactive glass loaded with in situ grown silver10.1016/j.cej.2019.03.273 ↗
47. Accelerated degradation of HAP/PLLA bone scaffold by PGA blending facilitates bioactivity and osteoconductivity
48. In vitro degradation behavior, antibacterial activity and cytotoxicity of TiO2-MAO/ZnHA composite coating on Mg alloy for orthopedic implants10.1016/j.surfcoat.2017.11.027 ↗
49. Development of the PVA/CS nanofibers containing silk protein sericin as a wound dressing: in vitro and in vivo assessment10.1016/j.ijbiomac.2020.01.139 ↗
50. Synthesis and sintering of nano-sized forsterite prepared by short mechanochemical activation process10.1016/j.jallcom.2016.02.020 ↗
51. Effect of the biodegradation rate controlled by pore structures in magnesium phosphate ceramic scaffolds on bone tissue regeneration in vivo10.1016/j.actbio.2016.08.039 ↗
52. Drug release, cytocompatibility, bioactivity, and antibacterial activity of doxycycline loaded Mg-Ca-TiO2 composite scaffold10.1016/j.matdes.2017.10.072 ↗
53. Preparing diopside nanoparticle scaffolds via space holder method: simulation of the compressive strength and porosity10.1016/j.jmbbm.2017.05.004 ↗
54. Magnesium-zinc scaffold loaded with tetracycline for tissue engineering application: in vitro cell biology and antibacterial activity assessment10.1016/j.msec.2019.04.010 ↗
55. Mechanical properties of bioactive glasses, ceramics, glass-ceramics and composites: state-of-the-art review and future challenges10.1016/j.msec.2019.109895 ↗
56. Processing methods for making porous bioactive glass‐based scaffolds—a state‐of‐the‐art review10.1111/ijac.13195 ↗
57. Engineered porous scaffolds for periprosthetic infection prevention10.1016/j.msec.2016.06.050 ↗
58. Synthesis, characterization and in vitro behavior of nanostructured diopside/biphasic calcium phosphate scaffolds10.1016/j.matchemphys.2016.11.013 ↗
59. Surface modification of fibrous PCL/diopside membranes via gelatin immobilization for bone tissue engineering10.1016/j.matchemphys.2017.03.051 ↗
60. Ceramic scaffolds enriched with gentamicin loaded poly(lactide-co-glycolide) microparticles for prevention and treatment of bone tissue infections10.1016/j.msec.2016.07.065 ↗
61. Infrared spectroscopy of the polymorphic series (enstatite, ilmenite, and perovskite) of MgSiO3, MgGeO3, and MnGeO310.1029/JB094iB11p15687 ↗
62. Preparation of nanocrystalline forsterite by combustion of different fuels and their comparative in-vitro bioactivity, dissolution behaviour and antibacterial studies10.1016/j.msec.2017.03.308 ↗
63. In vitro antimicrobial activity of nanoconjugated vancomycin against drug resistant Staphylococcus aureus10.1016/j.ijpharm.2012.07.033 ↗
64. Ultra-fast, highly efficient and green synthesis of bioactive forsterite nanopowder via microwave irradiation10.1016/j.msec.2018.06.026 ↗
65. Synthesis and in-vitro characterization of biodegradable porous magnesium-based scaffolds containing silver for bone tissue engineering10.1016/S1003-6326(19)65007-7 ↗
66. Pre-osteoblastic cell response on three-dimensional, organic-inorganic hybrid material scaffolds for bone tissue engineering10.1002/jbm.a.34516 ↗
67. CHAPTER 1 applications of smart multifunctional tissue engineering scaffolds10.1039/9781788010542-00001 ↗
68. Synthesis, characterization and strengthening mechanism of modified and unmodified porous diopside/baghdadite scaffolds10.1016/j.matchemphys.2019.02.041 ↗
69. Co-incorporation of graphene oxide/silver nanoparticle into poly-L-lactic acid fibrous: a route toward the development of cytocompatible and antibacterial coating layer on magnesium implants10.1016/j.msec.2020.110812 ↗
70. Preparation and characterization of a biocompatible magnetic scaffold for biomedical engineering10.1016/j.matchemphys.2017.10.080 ↗
71. Bioinspired ternary artificial nacre nanocomposites based on reduced graphene oxide and nanofibrillar cellulose10.1021/acsami.6b02156 ↗