Localized corrosion in anodized aluminium alloys: The role of constituent particle-induced defects in anodic films
Source abstract
Abstract
The influence of defects formed by dissolution of constituent intermetallic particles (IMPs) on the corrosion resistance of anodized aluminium alloys, including AA2024-T3, AA2198-T8, AA2198-T851, and AA7475-T761, is investigated. Localized corrosion initiates cavity defects located at the film/alloy interface, mainly due to the dissolution of high-copper-containing IMPs. In AA2024, Si-containing particle-induced defects also contributed to a reduction in corrosion resistance. Low-copper-containing IMPs in AA7475-T761 alloy, however, do not affect corrosion resistance. The effects of particle density, composition, size, and location on the formation of defects in anodic films and, subsequently, on corrosion resistance of anodized alloys are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Corrosion Behavior and Inhibition · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Runge · 2018
2. Anodic Films on Aluminium
3. Anodizing of aluminium alloys10.1108/00022669910270709 ↗
4. Improving the performance of aerospace alloys10.1108/00022660310484301 ↗
5. Effects of alloying elements in anodizing of aluminium10.1080/00202967.1997.11871137 ↗
6. Discoloration of anodized AA6063 aluminum alloy10.1149/2.065406jes ↗
7. Corrosion and anodizing behavior of T1 (Al₂CuLi) precipitates in Al-Cu-Li alloy10.1149/2.0891912jes ↗
8. A historical, statistical and electrochemical approach on the effect of microstructure in the anodizing of Al alloys: a review
9. A review on anodizing of aerospace aluminum alloys for corrosion protection10.3390/coatings10111106 ↗
10. Effect of alloy types on the anodizing process of aluminum10.1016/j.surfcoat.2005.07.065 ↗
11. Corrosion protection of clad 2024 aluminum alloy anodized in tartaric-sulfuric acid bath and protected with hybrid sol–gel coating10.1016/j.electacta.2013.09.004 ↗
12. Corrosion protection of clad AA2024 anodized in sulfuric and tartaric-sulfuric acid sealed with sol-gel hybrid coatings
13. EIS behavior of anodized and primer coated AA2198–T851 compared to AA2024–T3 exposed to salt spray CASS test10.1002/sia.5982 ↗
14. EIS investigation of a Ce-based post-treatment step on the corrosion behavior of Alclad AA2024 anodized in TSA
15. Tartaric-sulfuric acid anodized clad AA2024-T3 post-treated in Ce-containing solutions at different temperatures: Corrosion behavior and Ce ion distribution10.1016/j.apsusc.2020.147634 ↗
16. Corrosion protection of AA2524-T3 anodized in tartaric-sulfuric acid bath and protected with hybrid sol-gel coating10.4028/www.scientific.net/KEM.710.210 ↗
17. Corrosion resistance of 2524 Al alloy anodized in tartaric-sulfuric acid at different voltages and protected with a TEOS-GPTMS hybrid sol-gel coating10.1016/j.surfcoat.2017.05.090 ↗
18. Effect of cerium addition to a hydrothermal treatment on the corrosion protection of the tartaric-sulfuric acid anodized AA2524-T310.5006/3063 ↗
19. Corrosion resistance of tartaric-sulfuric acid anodized AA2024-T3 sealed with Ce and protected with hybrid sol–gel coating10.1016/j.surfcoat.2019.05.028 ↗
20. The effect of different carboxylic acids on the sulfuric acid anodizing of AA202410.1016/j.surfcoat.2019.125283 ↗
21. Corrosion behavior of AA2055 aluminum-lithium alloys anodized in the presence of sulfuric acid solution10.3390/coatings11111278 ↗
22. Research on corrosion resistance of anodized and sealed 6061 aluminum alloy in 3.5 % sodium chloride solution10.1016/j.ijoes.2023.100092 ↗
23. Effect of citric acid hard anodizing on the mechanical properties and corrosion resistance of different aluminum alloys10.3390/ma17174285 ↗
24. Corrosion behavior of aluminum alloys in different alkaline environments: effect of alloying elements and anodization treatments10.3390/coatings14020240 ↗
25. Effect of cerium (IV) on thin sulfuric acid anodizing of 2024-T3 alloy10.1016/j.jmrt.2021.09.117 ↗
26. Localized corrosion in AA2099-T83 aluminum-lithium alloy: the role of intermetallic particles10.1016/j.matchemphys.2015.05.037 ↗
27. Characterization of anodized and bare 7075-T6 aluminum alloy treated with Zr-based conversion coating10.4322/2176-1523.20202407 ↗
28. Influence of concentration and pH of hexafluorozirconic acid on corrosion resistance of anodized AA7075-T610.1590/1980-5373-mr-2019-0048 ↗
29. Corrosion behavior of anodized Al-Cu-Li alloy: the role of intermetallic particle-introduced film defects10.1016/j.corsci.2019.108110 ↗
30. TSA anodising voltage effects on the near-surface coarse intermetallic particles in the AA2024-T3 and AA2198-T8 alloys10.1080/1478422X.2022.2071666 ↗
31. (Digital Presentation) The effect of tartaric-sulfuric acid (TSA) anodizing on the corrosion resistance of the AA7475-T761
32. An assessment of pitting corrosion in anodized aluminum alloys: it might not be what it seems10.1002/maco.202313977 ↗
33. Microstructural origin of localized corrosion in anodized AA2099-T8 aluminium–lithium alloy10.1002/sia.5856 ↗
34. Chromium/nickel-free conversion coating as cold post-treatment to anodized AA2024-T3 for corrosion resistance increase10.1016/j.surfcoat.2024.130566 ↗
35. The effect of post-treatment time and temperature on cerium-based conversion coatings on Al 2024-T310.1016/j.corsci.2009.09.023 ↗
36. Effect of iron-containing intermetallic particles on film structure and corrosion resistance of anodized AA2099 alloy10.1149/2.1361809jes ↗
37. Effect of barrier layer on corrosion resistance of porous-type anodic films formed on AA2055 Al–Cu–Li alloy and pure aluminum10.1149/1945-7111/ab75fe ↗
38. Selective oxidation of aluminium and interfacial enrichment of iron during anodic oxide growth on an Al6Fe phase10.1016/S0010-938X(99)00108-0 ↗
39. Voltage transients and morphology of AlSi(Cu) anodic oxide layers formed in H₂SO₄ at low temperature10.1016/S0257-8972(02)00144-5 ↗
40. Oxygen evolution within barrier oxide films10.1016/S0010-938X(02)00025-2 ↗
41. Application of CSLM to the surface morphological study of Al 5052 alloy anodized in sulfuric acid solution10.1149/1.1603248 ↗
42. AlSi(Cu) anodic oxide layers formed in H₂SO₄ at low temperature using different current waveforms10.1016/S0257-8972(02)00733-8 ↗
43. Behavior of second-phase particles in Al5052 alloy during anodizing in a sulfuric acid solution CSLM observation10.1149/1.1752933 ↗
44. Influence of substrate microstructure on the growth of anodic oxide layers10.1016/j.electacta.2003.10.024 ↗
45. Base metal microstructural considerations for aluminum finishing
46. Macroscopic and local filming behavior of AA2024-T3 aluminum alloy during anodizing in sulfuric acid electrolyte10.1149/1.2931522 ↗
47. Modelling the anodizing behavior of aluminum alloys in sulfuric acid through alloy analogues10.1016/j.corsci.2008.09.019 ↗
48. Effect of the microstructure of Al 7050-T7451 on anodic oxide formation in sulfuric acid10.1016/S1674-4799(09)60076-5 ↗
49. Effect of initial microstructure on surface appearance of anodized aluminum extrusions10.1007/s11661-009-9976-0 ↗
50. Preferential anodic oxidation of second-phase constituents during anodizing of AA2024-T3 and AA7075-T6 alloys10.1002/sia.3191 ↗
51. The behavior of second-phase particles during anodizing of aluminum alloys10.1016/j.corsci.2010.03.029 ↗
52. Enhanced performance of the AA2050-T8 aluminum alloy following excimer laser surface melting and anodizing processes10.1016/j.tsf.2009.09.121 ↗
53. FIB-SEM investigation of trapped intermetallic particles in anodic oxide films on AA1050 aluminum10.1108/00035591111148885 ↗
54. Atomic emission spectroelectrochemical investigation of the anodization of AA7050T74 aluminum alloy10.1016/j.elecom.2010.11.008 ↗
55. Growth of anodic oxide films on AC2A alloy in sulphuric acid solution10.1016/j.corsci.2011.01.029 ↗
56. Anodizing effect on the wear and corrosion behavior of en AC-46500 components produced by semi-solid rheocasting (SSR)10.1063/1.3589658 ↗
57. Anodic film formation on AA2099-T8 aluminum alloy in tartaric–sulfuric acid10.1149/1.3523262 ↗
58. Influence of intermetallic compounds and metallurgical state of the 2017A aluminium alloy on the morphology of alumina films developed by anodic oxidation
59. Electrochemical behaviour of intermetallic phases in sulfuric acid at high voltage—anodization of Al7Cu2Fe and MgZn2 phase
60. Comparison of anodized aluminum surfaces from four fabrication methods10.1016/j.jmatprotec.2012.06.007 ↗
61. J.M. Runge, Trace elements and their impact on surface finishing characteristics of aluminum extrusions, in: Proc. ET, Miami, 2012.
62. Anodising of Al-Mg-Si-(Cu) alloys produced by R-HPDC10.4028/www.scientific.net/MSF.765.658 ↗
63. Electrochemical behavior of anodized AA7075-T73 alloys as affected by the matrix structure10.1016/j.apsusc.2013.06.094 ↗
64. Microstructural characterisation of oxide layer developed by sulphuric anodisation on 2017A alloys10.3139/146.110962 ↗
65. In situ anodization of aluminum surfaces studied by x-ray reflectivity and electrochemical impedance spectroscopy10.1063/1.4890318 ↗
66. Corrosion behaviour of the anodised A356 aluminium alloy produced by the rheo-high pressure die casting process10.4028/www.scientific.net/AMR.1019.67 ↗
67. Corrosion resistance of aluminum alloy AA2024 with hard anodizing in sulfuric acid-free solution10.3390/ma15186401 ↗
68. Corrosion properties of anodized aluminum: effects of equal channel angular pressing prior to anodization10.1016/j.corsci.2014.08.020 ↗
69. Effect of Fe- and Si-enriched secondary precipitates and surface roughness on pore formation on aluminum plate surfaces during anodizing10.1007/s11665-014-1116-3 ↗
70. Effect of intermetallic phases on the anodic oxidation and corrosion of 5A06 aluminum alloy10.1007/s12613-015-1057-3 ↗
71. Influence of Si and cooling rate on microstructure and mechanical properties of Al-Si-Mg cast alloys10.1002/sia.5814 ↗
72. Interfacial phenomena in 7000 series alloys and their impact on the anodic oxide
73. Anodizing complex 7000 series
74. In situ and operando AFM and EIS studies of anodization of Al 6060: influence of intermetallic particles10.1149/2.0061610jes ↗
75. Anodisation of aluminium alloys by micro-capillary technique as a tool for reliable, cost-efficient, and quick process parameter determination10.1155/2016/1374897 ↗
76. Anodizing of multiphase aluminium alloys in sulfuric acid: in-situ electrochemical behaviour and oxide properties10.1016/j.electacta.2016.06.131 ↗
77. A study of formation and growth of the anodised surface layer on cast Al-Si alloys based on different analytical techniques10.1016/j.matdes.2016.04.013 ↗
78. Surface defects of anodized HPDC Al alloy components
79. Optimization for anodizing conditions of 5A06 aluminum alloy based on doehlert design matrix method10.4028/www.scientific.net/MSF.877.498 ↗
80. J.M. Runge, Base metal microstructural considerations for anodizing aluminum extrusions, in: Proc. Eleventh Int. Aluminum Extrusion Technol. Seminar, Chicago, 2016.
81. J.M. Runge, Understanding the interface: Meeting the challenges of anodizing cast substrates, in: Proc. 2016 AAC Annu. Tech. Conf. Exposition, Montreal, Canada, 2016.
82. Effect of AlSiFe on the anodizing process of 6063 aluminum10.1002/sia.6036 ↗
83. Effect of Si content and morphology on corrosion resistance of anodized cast Al-Si alloys10.1149/2.1631707jes ↗
84. Anodising and corrosion resistance of AA 7050 friction stir welds10.1016/j.corsci.2016.10.015 ↗
85. Hard anodizing of AA2099-T8 aluminum lithium copper alloy: influence of electric cycle, electrolytic bath composition and temperature10.1016/j.surfcoat.2017.07.028 ↗
86. Effect of acid traces on hydrothermal sealing of anodising layers on 2024 aluminium alloy10.1016/j.electacta.2010.07.089 ↗
87. Dissolution behavior of intermetallic particles in AA2297-T87 during anodizing in adipic-sulfuric acid10.1149/2.0061816jes ↗
88. Hard anodizing of AA2011-T3 Al-Cu-Pb-Bi free-cutting alloy: Improvement of the process parameters10.1016/j.corsci.2018.07.004 ↗
89. Characterization and corrosion behavior of anodized aluminum alloys for military industries applications in artificial seawater10.1016/j.surfin.2018.08.001 ↗
90. Effect of substrate microstructure on corrosion resistance of cast and forged anodised 6082 Al alloy10.1016/j.surfcoat.2024.130614 ↗
91. Microstructure effects on anodizing high-silicon aluminium alloy AlSi12Cu1(Fe) under various surface conditions and power modes10.3390/cryst14040352 ↗
92. Influence of hard anodizing on the mechanical and corrosion properties of different aluminum alloys10.1007/s13632-019-00594-5 ↗
93. A study of anodising behaviour of Al-Si components produced by rheocasting10.4028/www.scientific.net/SSP.285.39 ↗
94. Effect of alkaline etching on microstructure and anticorrosion performance of anodic film on Al-Mg-Si alloy10.1016/j.corsci.2020.108642 ↗
95. Anodisation of aluminium alloy AA7075 – Influence of intermetallic particles on anodic oxide growth10.1016/j.corsci.2019.108319 ↗
96. Corrosion improvement of AA7075 through precipitation hardness and anodization
97. Al-based anodic oxide films structure observation using field emission gun scanning electron microscopy10.1016/j.jmatprotec.2005.09.005 ↗
98. An investigation into the mechanical and tribological properties of plasma electrolytic oxidation and hard-anodized coatings on 6082 aluminum alloy10.1016/j.msea.2011.06.032 ↗
99. On the mechanical properties of nanoporous anodized alumina by nanoindentation and sliding tests10.1016/j.surfcoat.2011.09.040 ↗
100. Fatigue resistance of an anodized and hardanodized 6082 aluminum alloy depending on the coating thickness in the high cycle regime10.1002/adem.202300394 ↗