The study of passive film's resistivity distribution to crystalline Fe-based pseudo high entropy alloys: The use of measurement model and Cole-Cole regression
Source abstract
Abstract
International audience ; In this work, for the first time, passive film formation on two newly developed pseudo high entropy alloys (Fe61Cr11Mo8Nb4B16 and Fe61Cr11Mo8Ni4B16) was deeply investigated by using combined XPS and EIS techniques. Amorphous and crystalized samples (ribbons) were tested in a 0.6 M NaCl solution. The Power Law model was the most appropriate to describe part of the data, and a passive film's physical properties, such as resistivity and capacitance were determined. The XPS analysis revealed that a thin oxide layer covered all samples and that samples’ annealing decreased the amount of protective elements in the oxide layer, depleting corrosion properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. Why stainless steel corrodes10.1038/415770a ↗
2. Microstructure formation and abrasive wear resistance of a boron-modified superduplex stainless steel produced by spray forming10.1557/jmr.2016.323 ↗
3. G.Y. Koga, C. Bolfarini, C.S. Kiminami, A.M. Jorge, W.J. Botta, An Overview of Thermally Sprayed Fe-Cr-Nb-B Metallic Glass Coatings: From the Alloy Development to the Coating’s Performance Against Corrosion and Wear, 2022. 〈https://doi.org/10.1007/s11666-022-01371-7〉.10.1007/s11666-022-01371-7 ↗
4. Effect of annealing treatment at 550 °C on ferrite of thermally aged cast austenitic stainless steels and ageing kinetics of reverted cast austenitic stainless steels10.1016/j.jnucmat.2020.152530 ↗
5. Challenges in optimizing the resistance to corrosion and wear of amorphous Fe-Cr-Nb-B alloy containing crystalline phases10.1016/j.jnoncrysol.2020.120537 ↗
6. Synthesis of Fe–Cr–Mo–C–B–P bulk metallic glasses with high corrosion resistance10.1016/S1359-6454(01)00366-4 ↗
7. Synthesis and characterization of bulk amorphous steels10.1016/j.jnoncrysol.2008.02.009 ↗
8. Hardness, magnetism and passivation of Fe-Si-B-Nb glasses10.1016/j.jnoncrysol.2021.120830 ↗
9. Fe-based amorphous coatings: structures and properties10.1016/j.tsf.2013.08.029 ↗
10. Erosion-corrosion of HVOF-sprayed Fe-based amorphous metallic coating under impingement by a sand-containing NaCl solution10.1016/j.corsci.2013.07.006 ↗
11. Corrosion resistance and thermal stability of sputtered Fe44Al34Ti7N15 and Al61Ti11N28 thin films for prospective application in oil and gas industry10.1016/j.pnsc.2021.09.005 ↗
12. Erosion-corrosion behavior of Zr-based bulk metallic glass in saline-sand slurry10.1016/j.triboint.2012.10.010 ↗
13. Thermal-sprayed Fe-10CM3P–7C amorphous coatings possessing excellent corrosion resistance10.1007/BF02645279 ↗
14. Element-Resolved Corrosion10.1126/science.1230081 ↗
15. Crystallization, phase evolution and corrosion of Fe-based metallic glasses: An atomic-scale structural and chemical characterization study10.1016/j.actamat.2014.02.027 ↗
16. Newly-developed pseudo-high entropy amorphous alloys: Structure/microstructure evolution, mechanical and corrosion properties10.1016/j.jnoncrysol.2023.122369 ↗
17. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
18. Effect of high-order multicomponent on formation and properties of Zr-based bulk glassy alloys10.1016/j.jallcom.2015.03.078 ↗
19. Crystallization process and glass stability of an Fe48Cr15Mo14C15B6Tm2 bulk metallic glass10.1103/PhysRevB.78.144205 ↗
20. Mechanical properties of soft magnetic (Fe0.76Si0.096B0.084P0.06)100−xCux (x=0 and 0.1) Bulk Glassy Alloys10.2320/matertrans.ME200833 ↗
21. Potentiodynamic and potentiostatic investigation on the passivation of Fe based glassy alloys in alkaline solution10.1016/j.jallcom.2020.157573 ↗
22. Effect of metalloidal elements on corrosion resistance of amorphous iron-chromium alloys10.1016/0022-3093(78)90090-X ↗
23. Hardness, magnetism and passivation of Fe-Si-B-Nb glasses10.1016/j.jnoncrysol.2021.120830 ↗
24. In Operando Analysis of Passive Film Growth on Ni-Cr and Ni-Cr-Mo Alloys in Chloride Solutions10.1149/2.0261911jes ↗
25. A XPS study of the Mo effect on passivation behaviors for highly controlled stainless steels in neutral and alkaline conditions10.1016/j.apsusc.2012.12.118 ↗
26. Beneficial effect of reversed austenite on the intergranular corrosion resistance of martensitic stainless steel10.1016/j.corsci.2019.02.020 ↗
27. XPS investigation of passive films on amorphous FeCr alloys10.1016/0013-4686(92)85122-2 ↗
28. Atmospheric oxidation of a Nb-Zr alloy studied with XPS10.1016/S0010-938X(03)00139-2 ↗
29. Combined XPS / TEM study of the chemical composition and structure of the passive film formed on additive manufactured 17-4PH stainless steel
30. Tribollet · 2018
31. EIS comparative study and critical Equivalent Electrical Circuit (EEC) analysis of the native oxide layer of additive manufactured and wrought 316L stainless steel10.1016/j.corsci.2020.108480 ↗
32. Identification of Resistivity Distributions in Dielectric Layers by Measurement Model Analysis of Impedance Spectroscopy10.1016/j.electacta.2016.09.136 ↗
33. application of impedance spectroscopy and surface analysis to obtain oxide film thickness10.1149/2.1061709jes ↗
34. Electrochemical Impedance Spectroscopy (EIS) of parylene coated magnesium stents in organic solvent to study early corrosion control10.1016/j.corsci.2022.110932 ↗
35. EIS: measurement model program
36. Physical properties obtained from measurement model analysis of impedance measurements10.1016/j.electacta.2020.136747 ↗
37. Influence of electrode roughness on double layer formation in ionic liquids10.1021/jp512617j ↗
38. Comparison of different methods for measuring the passive film thickness on metals10.1016/j.electacta.2015.12.173 ↗
39. D. Briggs, Handbook of X-ray Photoelectron Spectroscopy C. D. Wanger, W. M. Riggs, L. E. Davis, J. F. Moulder and G. E.Muilenberg Perkin-Elmer Corp., Physical Electronics Division, Eden Prairie, Minnesota, USA, 1979. 190 pp. $195, 1981. 〈https://doi.org/10.1002/sia.740030412〉.10.1002/sia.740030412 ↗
40. Corrosion properties of amorphous, partially, and fully crystallized Fe68Cr8Mo4Nb4B16 alloy10.1016/j.jallcom.2020.154123 ↗
41. Pitting corrosion mechanism of Cl−- and S2−-induced by oxide inclusions in Fe-based amorphous metallic coatings10.1016/j.surfcoat.2020.125449 ↗
42. Influence of different heat treatment temperatures on the microstructure, corrosion, and mechanical properties behavior of fe-based amorphous/nanocrystalline coatings10.3390/coatings9120858 ↗
43. Comparison of electrochemical corrosion performance of eutectic Al-Si automotive alloy in deep seawater and 3.5% NaCl solution10.1016/j.matpr.2023.01.179 ↗
44. Influence of natural seawater variables on the corrosion behaviour of aluminium-magnesium alloy10.1016/j.bioelechem.2022.108321 ↗
45. Corrosion properties of Fe-Cr-Nb-B amorphous alloys and coatings10.1016/j.surfcoat.2014.06.022 ↗
46. Corrosion properties of amorphous, partially, and fully crystallized Fe68Cr8Mo4Nb4B16 alloy
47. G.Y. Koga, T. Ferreira, Y. Guo, A.M. Jorge, C.S. Kiminami, C. Bolfarini, W.J. Botta, Challenges in optimizing the resistance to corrosion and wear of amorphous Fe-Cr-Nb-B alloy containing crystalline phases, (n.d.).
48. Corrosion resistance of amorphous and nanocrystalline Fe-M-B (M=Zr, Nb) alloys10.1016/S0022-3093(00)00174-5 ↗
49. What we have learned from studies on chemical properties of amorphous alloys?10.1016/j.apsusc.2010.12.142 ↗
50. Microstructure, mechanical properties and corrosion performance of Fe44Cr15Mo14Co7C10B5Si5 thin film metallic glass deposited by DC magnetron sputtering10.1016/j.jnoncrysol.2019.119718 ↗
51. Partial crystallization and corrosion resistance of amorphous Fe-Cr-M-B (M = Mo, Nb) alloys10.1016/j.jnoncrysol.2010.04.051 ↗
52. From frequency dispersion to ohmic impedance: a new insight on the high-frequency impedance analysis of electrochemical systems10.1016/j.electacta.2019.134609 ↗
53. The origin of the complex character of the Ohmic impedance10.1016/j.electacta.2010.04.036 ↗
54. M.E. Orazem, J.E. Soc, M.E. Orazem, N. Pébère, B. Tribollet, Enhanced Graphical Representation of Electrochemical Impedance Data Enhanced Graphical Representation of Electrochemical, (2006). 〈https://doi.org/10.1149/1.2168377〉.10.1149/1.2168377 ↗
55. Electrochemical impedance analysis of TiO2 nanotube porous layers based on an alternative representation of impedance data10.1016/j.jelechem.2014.06.034 ↗
56. Electrochemical Impedance Spectroscopy
57. Constant-phase-element behavior caused by resistivity distributions in films10.1149/1.3499565 ↗
58. dielectric properties of materials showing constant-phase-element (CPE) Impedance Response10.1149/2.033306jes ↗
59. Interfacial bonding and corrosion behaviors of HVOF-sprayed Fe-based amorphous coating on 8090 Al-Li alloy10.1016/j.surfcoat.2022.128316 ↗
60. Study of passive films formed on mild steel in alkaline media by the application of anodic potentials10.1016/j.matchemphys.2008.11.012 ↗
61. Measurement models for electrochemical impedance spectroscopy: i. demonstration of applicability10.1149/1.2069522 ↗
62. Effect of atomic mobility on the electrochemical properties of a Zr58Nb3Cu16Ni13Al10 bulk metallic glass10.1016/j.electacta.2018.02.071 ↗
63. Investigation of the structural heterogeneity and corrosion performance of the annealed fe-based metallic glasses
64. Constant-phase-element behavior caused by resistivity distributions in films10.1149/1.3499564 ↗
65. relationship between the resistivity profiles obtained from the power law model and the physico-chemical properties of passive films10.1149/1945-7111/abde84 ↗
66. XPS study of duplex stainless steel oxidized by oxygen atoms10.1016/j.corsci.2009.01.021 ↗
67. Passivity, breakdown and repassivation of glassy Fe□Cr□P alloys10.1016/0010-938X(90)90128-R ↗
68. Improved corrosion resistance of novel Fe-based amorphous alloys
69. Characterization of the surface oxide film of a Co-Cr-Mo alloy after being located in quasi-biological environments using XPS10.1016/S0169-4332(01)00551-7 ↗
70. characterization of Fe-Nb sputtered thin films10.1016/j.jpcs.2015.06.012 ↗
71. Characterization of native oxide film on amorphous Co66Si16B12Fe4Mo2 by X-ray photoelectron spectroscopy10.1016/j.jallcom.2009.10.119 ↗
72. XPS study of oxide nucleation and growth mechanisms on a model FeCrNiMo stainless steel surface10.1016/j.apsusc.2021.151681 ↗
73. Chapter 4 - Size Analysis and Identification of Particles
74. Corrosion behaviour of metallic glasses10.1007/BF01113569 ↗
75. Development of Fe-based bulk metallic glasses as potential biomaterials10.1016/j.msec.2015.03.041 ↗
76. Corrosion performances in simulated body fluids and cytotoxicity evaluation of Fe-based bulk metallic glasses10.1016/j.msec.2011.12.018 ↗
77. XPS studies on passive films on amorphous Fe-Cr-(B,P)-C alloys10.1016/0010-938X(94)90163-5 ↗
78. Effects of alloying elements, Cr, Mo and N on repassivation characteristics of stainless steels using the abrading electrode technique10.1016/j.matchemphys.2005.10.016 ↗
79. The role of molybdenum in the dissolution and the passivation of stainless steels with adsorbed sulphur10.1016/0010-938X(92)90150-2 ↗
80. Effects of crystallization on the corrosion resistance of Fe-based amorphous coatings10.1016/j.corsci.2012.02.003 ↗
81. The Thickogram: a method for easy film thickness measurement in XPS10.1002/1096-9918(200006)29:6<403::AID-SIA884>3.0.CO;2-8 ↗
82. Comparative study of the surface oxide films on lean duplex and corresponding single phase stainless steels by XPS and ToF-SIMS10.1016/j.corsci.2018.08.009 ↗
83. Calculations of electron inelastic mean free paths. IX. Data for 41 elemental solids over the 50 eV to 30 keV range10.1002/sia.3522 ↗
84. Wear behavior and corrosion properties of Fe-based thin film metallic glasses10.1016/j.jallcom.2015.07.256 ↗
85. Investigation of nano- and micro-scale structural evolution and resulting corrosion resistance in plasma sprayed Fe-based (Fe-Cr-B-C-P) amorphous coatings10.1016/j.surfcoat.2020.126058 ↗
86. Transactions and Communications10.1002/jctb.5000630501 ↗
87. A. Chyrkin, Oxidation induced phase transformations and lifetime limits of chromia forming nickel base alloy 625, M.S. Thesis, RWTH, Aachen, n.d. 〈https://publications.rwth-aachen.de/record/82719/files/4248.pdf%0A〉.
88. Controlling chromium vaporization from interconnects with nickel coatings in solid oxide devices10.1016/j.ijhydene.2014.07.023 ↗
89. Chapter 4 - Size analysis and identification of particles
90. Pitting initiation in Fe-based amorphous coatings10.1016/j.actamat.2012.04.005 ↗
91. Influence of chromium concentration and partial crystallization on the corrosion resistance of FeCrNiB amorphous alloys10.1016/j.matchar.2021.111369 ↗
92. Corrosion resistance of Fe-based amorphous alloys10.1016/j.jallcom.2012.12.130 ↗