Ultra-high temperature oxidation resistance of a MoSi2 composite coating with TaB2 diffusion barrier on tantalum alloy
Source abstract
Abstract
High-temperature elemental inter-diffusion is an important cause of failure for high-temperature antioxidant coatings on tantalum substrate, yet little research has been reported on improving this phenomenon. A new MoSi 2 composite coating with TaB 2 diffusion barrier was prepared on a tantalum substrate surface by three steps of embedding/slurry sintering/embedding to solve the failure of silicide coating on tantalum substrate due to elemental diffusion under a high-temperature oxidation environment. The composite silicide coating showed excellent oxidation resistance at 1700 ℃, and the protection time was more than 14 h before failure. This may be due to the prevention of diffusion of Si atoms at the initial stage by the TaB 2 with many B atoms in a solid solution. The Mo 5SiB 2 layer with a low diffusion coefficient will be formed with the slow release of B atoms. The diffusion of Si atoms is further hindered by the formation of a new diffusion barrier between the TaB 2 phase and the main layer, and thus slowing down the depletion of Si elements in the main coating. In addition, the coating successfully passed 1021 thermal cycles from room temperature to 1700 ℃, which may be because of the alleviation of thermal mismatch between the ceramic coating body and the tantalum substrate by a diffusion layer thus reducing the cracking trend of coating.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Oxidation-based materials selection for 2000°C + hypersonic aerosurfaces: theoretical considerations and historical experience10.1023/B:JMSC.0000041686.21788.77 ↗
2. A review of the scramjet experimental data base10.1016/j.paerosci.2019.02.001 ↗
3. Recent advances in cavity-based scramjet engine- a brief review10.1016/j.ijhydene.2019.04.003 ↗
4. Design, preparation and properties of carbon fiber reinforced ultra-high temperature ceramic composites for aerospace applications: a review10.1016/j.jmst.2016.08.004 ↗
5. The applications of ultra-thin nanofilm for aerospace advanced manufacturing technology10.3390/nano11123282 ↗
6. Terentieva · 2001 · 345
7. the potential of tantalum alloys for space nuclear applications
8. Tantalum in the environment10.1016/j.earscirev.2017.07.002 ↗
9. Antibacterial activity, corrosion resistance and wear behavior of spark plasma sintered Ta-5Cu alloy for biomedical applications10.1016/j.jmbbm.2017.06.022 ↗
10. Microstructure and mechanical properties of electron beam welded joints of tantalum and GH312810.1016/j.msea.2019.138431 ↗
11. Thrust balance characterization of a 200 W quad confinement thruster for high thrust regimes10.1109/TPS.2014.2323417 ↗
12. Tantalum and its alloys10.1016/0263-4368(95)94023-R ↗
13. A comprehensive review of biological and materials properties of Tantalum and its alloys10.1002/jbm.a.37373 ↗
14. High-temperature oxidation of tantalum of different purity10.1007/BF01046896 ↗
15. Tantalum oxidation in steam atmosphere10.1007/s11085-015-9607-7 ↗
16. Thermal oxidation of tantalum films at various oxidation states from 300 to 700°C10.1063/1.2139834 ↗
17. Production-scale processing of a new intermetallic NiAl–Ta–Cr alloy for high-temperature application: Part I. Production of master alloy remelt ingots and investment casting of combustor liner model panels10.1016/S0924-0136(03)00130-4 ↗
18. Influence of aluminium addition on oxidation resistance of Ta-W alloy10.1080/00325899.2019.1662559 ↗
19. Anti-oxidation of emissing agents in TaSi2–MoSi2-borosilicate glass high emissivity coating10.1016/j.ceramint.2022.08.310 ↗
20. A novel ultra-high-temperature oxidation protective MoSi2-TaSi2 ceramic coating for tantalum substrate10.1016/j.jeurceramsoc.2019.02.037 ↗
21. The protection, challenge, and prospect of anti-oxidation coating on the surface of niobium alloy10.3390/coatings11070742 ↗
22. Preparation and characterization of MoSi2/MoB composite coating on Mo substrate10.1016/j.jallcom.2013.12.023 ↗
23. Anti-oxidation of emissing agents in TaSi2–MoSi2-borosilicate glass high emissivity coating10.1016/j.ceramint.2022.08.310 ↗
24. High temperature oxidation behavior of MoSi2–Al2O3 composite coating on TZM alloy10.1016/j.ceramint.2021.12.310 ↗
25. Microstructure and oxidation resistance of a YSZ modified silicide coating for Ta-W alloy at 1800° C10.1016/j.corsci.2018.08.007 ↗
26. A critical review on functionally graded coatings: methods, properties, and challenges10.1016/j.compositesb.2021.109278 ↗
27. Nanocrystalline coatings on superalloys against high temperature oxidation: a review10.1016/j.corcom.2021.06.003 ↗
28. Comparative study of failure mechanisms of MoSi2 coating on Mo1 wire mesh under isothermal oxidation and hot-fire test using a hydroxylammonium nitrate based monopropellant10.1016/j.jeurceramsoc.2020.12.025 ↗
29. Microstructure and growth kinetics of the Mo5Si3 and Mo3Si layers in MoSi2/Mo diffusion couple10.1016/S0966-9795(03)00068-2 ↗
30. Effect of free silicon content in inner SiC-Si coating on thermal cyclic ablation behaviour and microstructure of ZrC/SiC-Si coating10.1016/j.surfcoat.2020.125775 ↗
31. A new concept in high performance ceria–zirconia oxygen storage capacity material with Al2O3 as a diffusion barrier10.1016/j.apcatb.2007.09.013 ↗
32. Y2O3 film as a diffusion barrier between MoSi2 coating and Nb-Si based alloy10.1016/j.corsci.2021.110044 ↗
33. Study on the diffusion barrier effect of WSi2 layer at the MoSi2/Nb-Ti-Si based alloy interface10.1016/j.corsci.2019.108299 ↗
34. Arc ion plated-Cr2O3 intermediate film as a diffusion barrier between NiCrAlY and γ-TiAl10.1016/j.intermet.2009.10.009 ↗
35. Ion-plated Al–O–N and Cr–O–N films on Ni-base superalloys as diffusion barriers10.1016/j.surfcoat.2004.09.022 ↗
36. Yttria partially stabilised zirconia as diffusion barrier between NiCrAlY and Ni-base single crystal René N5 superalloy10.1016/j.corsci.2015.01.048 ↗
37. The Si-Ta (silicon-tantalum) system10.1007/BF02667688 ↗
38. Thermodynamic modeling of B-Ta and BC-Ta systems10.1007/s11669-017-0603-2 ↗
39. Deposition and oxidation behavior of Mo(Si,Al)2/MoB layered coatings on TZM alloy10.1016/j.ijrmhm.2017.04.008 ↗
40. Investigations of TaB2 on oxidation-inhibition property and mechanism of Si-based coatings in aerobic environment with broad temperature region for carbon materials10.1016/j.jeurceramsoc.2019.07.020 ↗
41. E. Rudy, F. Benesovsky, L. Toth, Untersuchung der Dreistoffsysteme der Va- und VIa-Metalle mit Bor und Kohlenstoff, 54 (1963) 345–353.10.1515/ijmr-1963-540604 ↗
42. A study of the thermal expansion of samples within the homogeneity ranges of NbB2 and TaB210.1016/0022-5088(88)90021-5 ↗
43. Oxidation behavior and microstructural evolution of a slurry sintered Si-Mo coating on Mo alloy at 1650°C10.1016/j.surfcoat.2017.05.054 ↗
44. Interdiffusion kinetics in the Mo5SiB2 (T2) phase10.1007/BF02736562 ↗
45. Diffusion annealing of Mo/MoSi2 couple and silicon diffusivity in Mo5Si3 layer10.1016/j.msea.2007.01.026 ↗
46. Reaction diffusion of MoSi2 and Mo5SiB210.1016/j.intermet.2004.06.005 ↗
47. The crystal structure and thermal expansion of Mo5SiB210.1016/S0966-9795(00)00113-8 ↗
48. Self-diffusion of silicon in molybdenum disilicide10.1080/14786430310001641966 ↗
49. Silicon diffusion in molybdenum disilicide: correlation effects10.1080/14786430310001646781 ↗