Exploration on the Stress‐induced Internal Corrosion of NaCl-deposited GH4169 under humid intermediate temperature environments
Source abstract
Abstract
The internal corrosion penetration of GH4169 with NaCl-deposited in humid environments was analyzed by graded times, stress levels and temperatures. Dynamic principles are proposed that the depth increases with time by the parabolic law and develops with the stress level exponentially in limited exposure time. Accelerated inward diffusion of oxygen aggravates the penetration due to the reduced growth activation energy, as the stress gradient promoted the diffusion of oxygen vacancies along penetrations. Oversaturated vacancies and voids caused by active corrosion release the stress of oxides’ volume change, affecting the stress gradient, and causing the corrosion penetration to grow negatively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Corrosion behavior of metals or alloys with a solid NaCl deposit in wet oxygen at medium temperature10.1007/s11431-011-4675-7 ↗
2. Corrosion behavior of Ti60 alloy under a solid NaCl deposit in wet oxygen flow at 600 °C
3. Influence of Cr content on the corrosion of Fe–Cr alloys: the synergistic effect of NaCl and water vapor10.1023/A:1023083309041 ↗
4. Studies on the corrosion behavior of Fe-20Cr alloy in NaCl solution spray at 600 °C10.1016/j.corsci.2018.01.033 ↗
5. Synergistic effect of NaCl and water vapor on the corrosion of 1Cr-11Ni-2W–2Mo-V steel at 500±700 °C10.1023/A:1018854202982 ↗
6. Studies on corrosion behavior of a single-crystal superalloy and its sputtered nanocrystalline coatings with solid NaCl deposit in O2 + 38 vol% H2O environment at 700 °C10.1016/j.corsci.2019.108187 ↗
7. Corrosion behavior of a sputtered K38G nanocrystalline coating with a solid NaCl deposit in wet oxygen at 600 to 700 °C10.1023/A:1016072726338 ↗
8. Low Cycle fatigue behavior of superalloy GH4169 in high temperature gas environment10.4028/www.scientific.net/KEM.827.336 ↗
9. Revealing internal corrosion of GH4169 with stress coupled solid NaCl deposited in a humid environment of 600 °C10.1016/j.corsci.2021.110004 ↗
10. Chloridation and oxidation of iron, chromium, nickel and their alloys in chloridizing and oxidizing atmospheres at 400-70010.1016/S0010-938X(99)00142-0 ↗
11. Corrosion behavior of pure Cr with a solid NaCl deposit in O2 plus water vapor10.1023/A:1004690518225 ↗
12. Corrosion inhibition of 304 stainless steel by nano-sized Ti/silicone coatings in an environment containing NaCl and water vapor at 400–600◦C10.1023/B:OXID.0000038782.77162.5b ↗
13. The effects of chlorides, hydrogen-chloride, and sulfur-dioxide in the oxidation of steels below deposits10.1016/0010-938X(95)00011-8 ↗
14. The implications of chlorine-associated corrosion on the operation of biomass-fired boilers10.1016/S0360-1285(00)00003-4 ↗
15. Degradation mechanism of Ti-6Al-2Sn-4Zr-2Mo-Si alloy exposed to solid NaCl deposit at high temperature10.1016/j.corsci.2020.108611 ↗
16. Analysis of combined static load and low temperature hot corrosion induced cracking in CMSX-4 at 550°C10.1016/j.corsci.2019.108293 ↗
17. The mechanisms of hot salt stress corrosion cracking in titanium alloy Ti-6Al-2Sn-4Zr-6Mo10.1016/j.corsci.2018.02.025 ↗
18. A cracking oxygen story: a new view of stress corrosion cracking in titanium alloys10.1016/j.actamat.2022.117687 ↗
19. Environmentally-assisted grain boundary attack as a mechanism of embrittlement in a nickel-based superalloy10.1016/j.actamat.2016.12.039 ↗
20. Effect of dynamic embrittlement on high temperature fatigue crack propagation in GH4169 – experimental characterisation and mechanism-based modelling10.1080/09603409.2016.1187464 ↗
21. Brittle intergranular fracture of a Ni-base superalloy at high temperatures by dynamic embrittlement10.1016/j.msea.2004.05.053 ↗
22. Internal oxidation10.1179/mst.1988.4.12.1072 ↗
23. Enhanced diffusion of oxygen during internal oxidation of nickel-base alloys10.1080/01418618208236942 ↗
24. Diffusion in internal oxidation reactions10.4028/www.scientific.net/DDF.323-325.283 ↗
25. Precipitate morphologies and growth kinetics in the internal carburisation and nitridation of Fe±Ni±Cr alloys10.1016/S0010-938X(99)00095-5 ↗
26. A mechanism for stress-aided grain boundary oxidation ahead of cracks10.1016/j.scriptamat.2013.03.026 ↗
27. Stress effects in high-temperature oxidation of metals10.1179/imr.1995.40.1.1 ↗
28. The influence of stress on the oxidation of a Ni-based superalloy10.1016/j.corsci.2019.04.023 ↗
29. Predicting internal oxidation: building on the Wagner model10.4028/www.scientific.net/MSF.696.1 ↗
30. Effects of sulphate deposits on corrosion behaviour of Ni-base alloys in wet CO2 gas at 750 °C10.1016/j.corsci.2020.109227 ↗
31. Theoretical analysis of the diffusion processes determining the oxidation rate of alloys10.1149/1.2779605 ↗
32. Understanding the role of Diffusion Induced Grain Boundary Migration on the preferential intergranular oxidation behaviour of Alloy 600 via advanced microstructural characterization10.1016/j.actamat.2019.06.021 ↗
33. Correlation between grain boundary migration and stress corrosion cracking of Alloy 600 in hydrogenated steam10.1016/j.actamat.2020.01.020 ↗
34. Internal oxidation with significant contribution of oxygen diffusion through the oxide phase10.1016/j.corsci.2012.06.003 ↗
35. Precipitate morphologies and growth kinetics in the internal carburisation and nitridation of Fe-Ni-Cr alloys10.1016/S0010-938X(99)00095-5 ↗
36. Internal chlorination of Ni-based alloys and its relation to volatilization corrosion10.1002/maco.19970480706 ↗
37. Perturbation of parabolic kinetics resulting from the accumulation of stress in protective oxide layers10.1149/1.2131644 ↗
38. Kinetic and morphological development of internal precipitates in iron-chromium alloys10.4028/www.scientific.net/MSF.369-372.93 ↗
39. A Microstructural and Kinetic Investigation of the KCl-Induced Corrosion of an FeCrAl Alloy at 600 °C10.1007/s11085-015-9546-3 ↗
40. N. Birks, G.H. Meier, F.S. Pettit, Introduction to the High-Temperature Oxidation of Metals, 2nd Edition, (2006) 16–38.10.1017/CBO9781139163903 ↗
41. Chapter 6 - alloy oxidation II: internal oxidation
42. Reaktionstypen bei der oxydation von legierungen
43. The influence of a KCl-rich environment on the corrosion attack of 304 L: 3D FIB/SEM and TEM investigations10.1016/j.corsci.2021.109315 ↗
44. Defect-driven selective metal oxidation at atomic scale10.1038/s41467-020-20876-9 ↗
45. Enhanced oxygen diffusion along internal oxide–metal matrix interfaces in Ni–Al alloys during internal oxidation
46. Hot corrosion-creep interaction in GH4169 under simulated marine environment: Introducing strain-associated-time (SAT) plots for comprehensive understanding10.1016/j.corsci.2021.109667 ↗
47. Oxidation of Ni-Cr alloy at intermediate oxygen pressures. I. Diffusion mechanisms through the oxide layer10.1016/j.corsci.2016.05.025 ↗
48. The dependence of oxidation resistance on gamma prime intermetallic size for superalloy IN738LC10.1016/j.corsci.2018.12.002 ↗
49. Role of oxygen in enhanced fatigue cracking in a PM Ni-based superalloy: Stress assisted grain boundary oxidation or dynamic embrittlment?10.1016/j.corsci.2018.05.001 ↗
50. Intergranular oxidation of Ni-base alloy 718 with a focus on additive manufacturing10.1016/j.corsci.2020.108684 ↗
51. Novel internal oxidation behavior of new 17Cr2Ni2MoVNb steel10.1016/j.corsci.2023.111126 ↗
52. Predictions and analyses on the growth behavior of oxide scales formed on ferritic–martensitic in supercritical water10.1007/s11085-019-09912-2 ↗
53. Effects of microstructure on high temperature dwell fatigue crack growth in a coarse grain PM nickel based superalloy10.1016/j.actamat.2015.02.023 ↗
54. Modification of the mechanism for stress-aided grain boundary oxidation ahead of cracks10.1007/s11085-017-9789-2 ↗
55. Stress induced diffusion along adhesional contact interfaces10.1016/S1359-6454(03)00015-6 ↗
56. Environmentally enhanced creep crack growth by grain boundary cavitation under cyclic loading10.1016/j.actamat.2018.04.034 ↗
57. Short-term creep behavior of an additive manufactured non-weldable Nickel-base superalloy evaluated by slow strain rate testing10.1016/j.actamat.2019.08.034 ↗
58. NaCl induced corrosion of Ti-6Al-4V alloy at high temperature10.1016/j.corsci.2016.04.016 ↗
59. Crack initiation of neutron-irradiated 304 L stainless steel in PWR primary water10.1016/j.corsci.2021.109902 ↗