Wear behavior of high entropy alloys containing soft dispersoids (Pb, Bi)
Source abstract
Abstract
Abstract Intrinsic high entropy alloys (HEAs) exhibit superior mechanical properties (hardness, strength, ductility, toughness etc.) and hence, they are considered as potential candidates for wear resistance applications. Wear resistance of HEAs can further be improved by engineering microstructure using various novel design concepts. One of such concepts involves the usages of soft dispersoids (Sn, Pb, Bi, Sb etc.) in the HEA matrix. However, the challenge is to engineer the novel microstructure consisting of soft dispersoids, dispersed uniformly in the HEA matrix, using suitable processing techniques. In this connection, the present work reports the effect of soft dispersoids, such as Pb and Bi on the wear behavior in equiatomic CuCrFeTiZn and AlCrFeMnV HEAs. The alloys containing Pb and Bi were synthesized using mechanical alloying (MA) followed by spark plasma sintering (SPS) in inert argon atmosphere. Phases and microstructure of milled powder and sintered alloys were investigated using XRD, SEM equipped with EDS. Sliding wear tests were also carried out for all the sintered samples at 2N, 5N, 7N and 10N load for various sliding speeds. Wear results indicate coefficient of friction (COF) does not vary much with varying the Pb concentration in HEAs. However, wear rate decreases significantly with increasing the Pb content in the alloys. For HEAs containing Bi, there is considerable decrease in the COF as well as in the wear rate even for a lower (5%) Bi content. Increasing load does not cause any change in the COF in both cases. However, wear rate decreases substantially due to increase of load. In addition, SEM analysis of the worn surface and wear debris were performed and it has been found that oxidative wear is the dominant wear mechanism in these systems. However wear tracks indicate the presence of abrasive wear. Analysis of Raman spectroscopy of wear debris confirms the presence of Fe2O3, Bi2O3 and PbO.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Spark plasma sintering of nanocrystalline Cu and Cu-10 wt Pct Pb alloy10.1007/s11661-010-0589-4 ↗
2. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
3. A hexagonal close-packed high-entropy alloy: the effect of entropy10.1016/j.matdes.2016.01.149 ↗
4. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
5. Effect of vanadium addition on the microstructure, hardness, and wear resistance of Al0. 5CoCrCuFeNi high-entropy alloy10.1007/s11661-006-0081-3 ↗
6. Effect of iron content on wear behavior of AlCoCrFe x Mo 0.5 Ni high-entropy alloys10.1016/j.wear.2009.10.013 ↗
7. Tribological properties of AlCrCuFeNi2 high-entropy alloy in different conditions10.1007/s11661-016-3396-8 ↗
8. Formation and mechanical properties of CoNiCuFeCr high-entropy alloys coatings prepared by plasma transferred arc cladding process10.1007/s11090-013-9469-1 ↗
9. Microstructure and wear behavior of AlxCo 1.5 CrFeNi 1.5 Tiy high-entropy alloys10.1016/j.actamat.2011.06.041 ↗
10. Friction characteristics of stir-cast Al-Pb alloys10.1016/0043-1648(92)90184-A ↗
11. A study on tribological behaviour of tin-based bearing material in dry sliding10.1016/j.matdes.2005.05.016 ↗
12. Laser cladding of quasi-crystal-forming Al-Cu-Fe-Bi on an Al-Si alloy substrate10.1007/s11661-005-0058-7 ↗
13. In the quest of single phase multi-component multiprincipal high entropy alloys
14. Processing and consolidation of nanocrystalline Cu-Zn-Ti-Fe-Cr high-entropy alloys via mechanical alloying10.1007/s11661-013-1824-6 ↗
15. Solidification behaviour of Ti-Cu-Fe-Co-Ni high entropy alloys10.1007/s12666-012-0206-x ↗
16. J.D. Gelorme, R.J. Cox, S.A. Gutierrez, Photoresist composition and printed circuit boards and packages made therewith, Google Patents, 1989.
17. Microstructure and wear behavior of a refractory high entropy alloy10.1016/j.ijrmhm.2016.02.006 ↗
18. Performances of hybrid high-entropy high-Cr cast irons during sliding wear and air-jet solid-particle erosion10.1016/j.wear.2012.12.045 ↗
19. Tribological behavior of AlCoCrCuFeNi and AlCoCrFeNiTi 0.5 high entropy alloys under hydrogen peroxide solution against different counterparts10.1016/j.triboint.2015.06.013 ↗
20. Worn surface characteristics of Cu-based powder metallurgy bake materials for aircraft10.1016/S1003-6326(07)60055-7 ↗
21. Yeh · 2010
22. Raman spectroscopy on defective wear debris generated by contact vibrations10.1007/BF00275623 ↗
23. Reproducibility of friction and wear results in ball-on-disc unidirectional sliding tests of TiN-alumina pairings10.1016/S0043-1648(97)00167-1 ↗
24. Fretting wear of multilayered (Ti, Al) N/TiN coatings in air of different relative humidity10.1016/S0043-1648(98)00348-2 ↗
25. Expressing wear rate in sliding contacts based on dissipated energy10.1016/S0043-1648(01)00867-5 ↗
26. The relationship between wear and dissipated energy in sliding systems10.1016/j.wear.2005.02.121 ↗
27. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
28. Amontons-coulomb friction laws, a review of the original manuscript10.4271/2014-01-2489 ↗
29. On the thermodynamics of friction and wear―a review10.3390/e12051021 ↗