Influence of hydrogen on the S–N fatigue of DP1180 advanced high-strength steel
Source abstract
Abstract
We studied the load-controlled fatigue behaviour (at a stress ratio R = 0.1, 1 Hz, using smooth flat-sheet specimens) in air and with hydrogen (electrochemically charged at a current density of 16 mA cm in 0.1 M NaOH) for a 1180 MPa dual-phase advanced high-strength steel. There was no significant difference between the fatigue lives with hydrogen and in air, even though there was a clear influence of hydrogen on the fatigue fractography. The hydrogen diffusion coefficient (0.8 ×10 cm s) and a hydrogen content of 1.0 µg g were evaluated using hydrogen permeation experiments. A rougher surface produced a shorter fatigue life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. WorldAutoSteel, Advanced High-Strength Steels Application Guidelines V6.0, in, 2017.
2. Three generations of advanced high-strength steels for automotive applications
3. K.M. Clemens Bergmann, Hydrogen embrittlement resistance evaluation of advanced high strength steels in automotive applications, in: Third International Conference on Metals & Hydrogen, 2018.
4. Evaluation of automobile service performance using laboratory testing10.1080/02670836.2018.1495903 ↗
5. Correlation between the microstructure and hydrogen embrittlement resistance in a precipitation-hardened martensitic stainless steel10.1016/j.corsci.2021.109260 ↗
6. Mechanical properties and fracture behavior of hydrogen charged AHSS/UHSS grades at high- and low strain rate tests10.1016/j.msea.2013.10.044 ↗
7. Chemical heterogeneity enhances hydrogen resistance in high-strength steels10.1038/s41563-021-01050-y ↗
8. Influence of high pressure gaseous hydrogen on S–N fatigue in two austenitic stainless steels10.1016/j.ijfatigue.2013.01.010 ↗
9. The influence of hydrogen on the low cycle fatigue behavior of medium strength 3.5NiCrMoV steel studied using notched specimens10.1002/adem.201700680 ↗
10. Effect of shearing prestrain on the hydrogen embrittlement of 1180 MPa grade martensitic advanced high-strength steel10.1016/j.corsci.2022.110170 ↗
11. Hydrogen-induced fast fracture in notched 1500 and 1700 MPa class automotive martensitic advanced high-strength steel10.1016/j.corsci.2021.109550 ↗
12. Hydrogen embrittlement of an automotive 1700 MPa martensitic advanced high-strength steel10.1016/j.corsci.2020.108726 ↗
13. Further study of the hydrogen embrittlement of martensitic advanced high-strength steel in simulated auto service conditions10.1016/j.corsci.2018.02.037 ↗
14. Evaluation of the influence of hydrogen on some commercial DP, Q&P and TWIP advanced high-strength steels during automobile service10.1016/j.engfailanal.2018.08.011 ↗
15. Hydrogen influence on some advanced high-strength steels10.1016/j.corsci.2017.06.012 ↗
16. Influence of hydrogen on the mechanical and fracture properties of some martensitic advanced high strength steels in simulated service conditions10.1016/j.corsci.2016.05.040 ↗
17. Evaluation of hydrogen absorption into steel in automobile moving environments10.1016/j.corsci.2015.05.049 ↗
18. Hydrogen fracture maps for sheared-edge-controlled hydrogen-delayed fracture of 1180 MPa advanced high-strength steels10.1016/j.corsci.2021.109360 ↗
19. Hydrogen-induced delayed fracture of a 1180 MPa martensitic advanced high-strength steel under U-bend loading
20. Effect of plastic strain damage on the hydrogen embrittlement of a dual-phase (DP) and a quenching and partitioning (Q&P) advanced high-strength steel10.1016/j.msea.2020.139343 ↗
21. On the failure of surface damage to assess the hydrogen-enhanced deformation ahead of crack tip in a cyclically loaded austenitic stainless steel10.1016/j.scriptamat.2019.03.010 ↗
22. Standard Test Method for Strain-Controlled Fatigue Testing, in: E606/E606M, 2019.
23. The mechanism of hydrogen evolution on iron in acid solutions by determination of permeation rates10.1149/1.2426195 ↗
24. Electrochemical studies of hydrogen diffusion and permeability in Ni10.1016/0010-938X(80)90102-X ↗
25. Determination of the hydrogen fugacity during electrolytic charging of steel10.1016/j.corsci.2014.06.033 ↗
26. Hydrogen concentration in dual-phase (DP) and quenched and partitioned (Q&P) advanced high-strength steels (AHSS) under simulated service conditions compared with cathodic charging conditions10.1002/adem.201600217 ↗
27. Hydrogen trapping in some automotive martensitic advanced high-strength steels10.1002/adem.201700468 ↗
28. Reversible hydrogen trapping in a 3.5NiCrMoV medium strength steel10.1016/j.corsci.2015.04.011 ↗
29. Hydrogen trapping in some advanced high strength steels10.1016/j.corsci.2016.05.046 ↗
30. Adaptation of the electrochemical permeation technique for studying entry, transport and trapping of hydrogen in metals10.1016/j.electacta.2005.02.151 ↗
31. A method for determination of the permeation rate of hydrogen through metal membranes10.1149/1.3087209 ↗
32. The influence of hydrogen on the mechanical and fracture properties of some martensitic advanced high strength steels studied using the linearly increasing stress test10.1016/j.corsci.2015.06.038 ↗
33. Effect of cold deformation on the hydrogen permeation in a dual-phase advanced high-strength steel10.1016/j.electacta.2022.140619 ↗
34. A review of the influence of hydrogen on the mechanical properties of DP, TRIP, and TWIP advanced high-strength steels for auto construction10.1515/corrrev-2015-0083 ↗
35. Study of the hydrogen uptake in deformed steel using the microcapillary cell technique10.1016/j.corsci.2019.04.029 ↗
36. The effect of hydrogen on the fatigue life of Ni–Cr–Mo steel envisaged for use as a storage cylinder for a 70MPa hydrogen station10.1016/j.ijfatigue.2011.07.007 ↗
37. Fatigue of DIN 1.4914 martensitic stainless steel in a hydrogen environment10.1016/0022-3115(94)90126-0 ↗
38. Bathias · 2013
39. Effect of Al addition on low-cycle fatigue properties of hydrogen-charged high-Mn TWIP steels10.1016/j.msea.2016.09.082 ↗
40. Role of microstructure in the low cycle fatigue of multi-phase steels10.1016/j.msea.2011.11.071 ↗
41. Fatigue properties of transformation-induced plasticity and dual-phase steels for auto-body lightweight: Experiment, modeling and application10.1016/j.matdes.2009.12.034 ↗
42. The effect of prestrain and bake hardening on the low-cycle fatigue properties of TRIP steel10.1016/j.ijfatigue.2007.06.002 ↗
43. Anderson · 2017
44. Subsurface crack initiation in high cycle fatigue in Ti6A14V and in a typical martensitic stainless steel10.1016/0036-9748(83)90385-X ↗
45. Ultra-high cycle fatigue behavior of a novel 1.9 GPa grade super-high-strength maraging stainless steel10.1016/j.msea.2019.03.120 ↗
46. Influence of uniaxial and biaxial pre-straining on the low cycle fatigue performance of DP590 steel10.1016/j.ijfatigue.2021.106260 ↗
47. Effects of hydrogen on fatigue crack growth behavior of austenitic stainless steels10.1016/j.ijhydene.2008.02.067 ↗
48. A new model for hydrogen-assisted cracking (hydrogen “embrittlement”)10.1007/BF02642048 ↗
49. The effect of hydrogen on dislocation dynamics10.1016/S0013-7944(99)00094-6 ↗
50. Hydrogen-enhanced localized plasticity—a mechanism for hydrogen-related fracture10.1016/0921-5093(94)90975-X ↗
51. Interpreting hydrogen-induced fracture surfaces in terms of deformation processes: a new approach10.1016/j.scriptamat.2011.06.016 ↗
52. Interpreting hydrogen-induced fracture surfaces in terms of deformation processes: a new approach10.1016/j.actamat.2011.03.002 ↗
53. Hydrogen embrittlement of ferritic steels: observations on deformation microstructure, nanoscale dimples and failure by nanovoiding10.1016/j.actamat.2012.06.014 ↗
54. Characteristic S–N properties of high‐carbon–chromium‐bearing steel under axial loading in long‐life fatigue10.1046/j.1460-2695.2002.00574.x ↗
55. Relationship among fatigue life, inclusion size and hydrogen concentration for high-strength steel in the VHCF regime10.1016/j.msea.2009.10.056 ↗
56. Murakami · 2019
57. On the formation of GBF of high-strength steels in the very high cycle fatigue regime10.1016/j.msea.2008.08.011 ↗
58. On the crystallographic, stage I-like, character of fine granular area formation in internal fish-eye fatigue cracks10.1016/j.ijfatigue.2017.09.013 ↗
59. Factors influencing the mechanism of superlong fatigue failure in steels10.1046/j.1460-2695.1999.00187.x ↗
60. Subsurface crack initiation and propagation mechanism in high-strength steel in a very high cycle fatigue regime10.1016/j.ijfatigue.2005.08.015 ↗
61. A review of hydrogen embrittlement of martensitic advanced high-strength steels10.1515/corrrev-2016-0006 ↗
62. On the formation mechanisms of fine granular area (FGA) on the fracture surface for high strength steels in the VHCF regime10.1016/j.ijfatigue.2015.08.021 ↗
63. The characteristics of granular-bright facet in hydrogen pre-charged and uncharged high strength steels in the very high cycle fatigue regime10.1007/s10853-009-4007-5 ↗