Corrosion performance and mechanisms of tantalum coatings on 316 stainless-steel in subcritical aqueous solutions of NaCl and NaBr
Source abstract
Abstract
The corrosion behavior of 316 stainless-steel with a tantalum (Ta-316) coating deposited using PVD technology was investigated in subcritical environments containing Cl − and Br − at 290 °C and 6 MPa. The corrosion rate of Ta-316 continuously decreased with increasing exposure time, demonstrating its high corrosion resistance. A thin film, mainly composed of Ta 2O 5, formed on the surface of the tantalum coating, preventing the diffusion of substrate elements. The corrosion process and mechanism of Ta-316 were also examined.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Subcritical and Supercritical Water Processes · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (90)
Show source-provided references
1. Organic synthesis in subcritical water: oxidation of alkyl aromatics10.1016/S0896-8446(98)00084-9 ↗
2. Water recovery from textile bath wastewater using combined subcritical water oxidation and nanofiltration10.1016/j.jclepro.2020.125207 ↗
3. Corrosion in high-temperature and supercritical water and aqueous solutions: a review10.1016/S0896-8446(03)00031-7 ↗
4. Degradation of emerging contaminant coumarin based on anodic oxidation, electro-Fenton and subcritical water oxidation processes10.1016/j.envres.2022.112736 ↗
5. Treatment of methyldiethanolamine wastewater using subcritical and supercritical water oxidation: parameters study, process optimization and degradation mechanism10.1007/s11356-022-19910-8 ↗
6. Treatment of agrochemical wastewater by subcritical water oxidation method: chemical composition and ion analysis of treated and untreated samples
7. Subcritical water oxidation of propham by H2O2 using response surface methodology (RSM)10.1080/03601234.2018.1431468 ↗
8. Corrosion characteristic comparisons of ZrO2-, TiO2-coated and uncoated 316 stainless steel samples in supercritical water oxidation of municipal sludge10.1016/j.supflu.2019.104663 ↗
9. Corrosion control methods in supercritical water oxidation and gasification processes10.1016/j.supflu.2009.08.001 ↗
10. Corrosion properties of candidate materials in supercritical water oxidation process
11. Early corrosion characterization of 316 stainless steel (Passivated in supercritical water with Na3PO4) in subcritical water containing oxygen and NaCl10.1007/s11665-020-04701-4 ↗
12. High-temperature corrosion of Fe-Ni-based alloy HR6W, Ni-based alloys Haynes 282 and Inconel 740 in supercritical water at 450 °C and 25 MPa10.1016/j.jallcom.2021.160350 ↗
13. Corrosion behavior of tantalum coatings on AISI 316L stainless steel substrate for bipolar plates of PEM fuel cells10.1016/j.ijhydene.2019.12.157 ↗
14. Corrosion behavior of alloy C-276 in supercritical water10.1155/2018/1027640 ↗
15. Corrosion behavior of alloy 316L stainless steel after exposure to supercritical water at 500 °C for 20,000h10.1016/j.supflu.2017.03.022 ↗
16. Progress in corrosion resistant materials for supercritical water reactors10.1016/j.corsci.2009.07.007 ↗
17. Effect of water density/pressure on the corrosion behavior of 304 and 310 stainless steels10.1007/s11085-017-9812-7 ↗
18. Corrosion behavior of nickel base alloys, stainless steel and titanium alloy in supercritical water containing chloride, phosphate and oxygen10.1016/j.cherd.2015.05.003 ↗
19. Development of a model for the anodic behavior of T60 titanium in chlorinated and oxygenated aqueous media. Application to the specific conditions of hydrothermal oxidation (1 MPa<pressure<30 MPa, 20 °C<temperature<400 °C)10.1016/S0013-4686(03)00111-7 ↗
20. A novel mechanism for nodular corrosion of Zircaloy-4 corroded in 773 K superheated steam10.1016/j.corsci.2017.06.007 ↗
21. Oxidation behaviour of Nimonic 263 in high-temperature supercritical water10.1080/1478422X.2018.1519102 ↗
22. Corrosion properties and mechanisms of austenitic stainless steels and Ni-Base alloys in supercritical water containing phosphate, sulfate, chloride and oxygen10.1007/s11085-018-9855-4 ↗
23. UV-durable superhydrophobic ZnO/SiO2 nanorod arrays on an aluminum substrate using catalyst-free chemical vapor deposition and their corrosion performance10.1016/j.apsusc.2023.157085 ↗
24. Corrosion and anodizing behavior of T1 (Al2CuLi) precipitates in Al-Cu-Li alloy10.1149/2.0891912jes ↗
25. Corrosion characteristics of typical Ni–Cr alloys and Ni–Cr–Mo alloys in supercritical water: a Review10.1021/acs.iecr.0c04292 ↗
26. Characteristics of sodium sulfate deposition in hydrogen production from supercritical water gasification: a review10.1016/j.ijhydene.2019.05.125 ↗
27. Solute-vacancy interaction model and the effect of minor alloying elements on the initiation of pitting corrosion10.1149/1.2113886 ↗
28. The mechanism of high temperature aqueous corrosion of stainless steels10.1016/0010-938X(91)90125-9 ↗
29. Analysis of surface oxide films formed in hydrogenated primary water on alloy 690TT samples with different surface states10.1016/j.jmst.2014.09.002 ↗
30. Characterization of oxide scales formed on heating equipment in supercritical water gasification process for producing hydrogen10.1016/j.ijhydene.2019.01.284 ↗
31. Characterization of bioactivity behavior and corrosion responses of hydroxyapatite-ZnO nanostructured coating deposited on NiTi shape memory alloy10.1016/j.ceramint.2018.08.197 ↗
32. Effect of sealing treatment on corrosion behavior of plasma sprayed ZrO2 coated Cf/Mg composites10.1016/j.surfcoat.2021.127627 ↗
33. Deposition of self-healing thin films by the sol–gel method: a review of layer-deposition mechanisms and activation of self-healing mechanisms10.1007/s00339-019-2854-8 ↗
34. The effect of substrate temperature on microstructural evolution and hardenability of tungsten carbide coating in hot filament chemical vapor deposition10.1111/ijac.12905 ↗
35. Corrosion behaviour of magnetron sputtered α- and β-Ta coatings on AISI 4340 steel as a function of coating thickness10.1016/j.corsci.2005.08.007 ↗
36. A high-throughput screening technique for conversion in hot compressed water10.1021/ie030732a ↗
37. Hydrothermal molten salt: A hydrothermal fluid in SCWO treatment of hypersaline wastewater10.1016/j.cej.2021.129589 ↗
38. Modification of surface hardness, wear resistance and corrosion resistance of cold spray Al coated AZ31B Mg alloy using cold spray double layered Ta/Ti coating in 3.5 wt% NaCl solution10.1016/j.corsci.2020.109029 ↗
39. The inhibition effects of anion and cation inhibitors on corrosion of iron in an anhydrous acetonitrile solution of FeCl 310.1016/S0010-938X(99)00085-2 ↗
40. Effect of pitting corrosion on the mechanical properties of 316 grade stainless steel
41. Cracking and spalling of the oxide layer developed in high-burnup Zircaloy-4 cladding under normal operating conditions in a PWR10.1016/j.jnucmat.2018.10.003 ↗
42. Oxidation behavior of FeCrAl coated Zry-4 under high temperature steam environment10.1016/j.corsci.2019.01.004 ↗
43. Mechanism of Al on FeCrAl steam oxidation behavior and molecular dynamics simulations10.1016/j.jallcom.2020.154310 ↗
44. Corrosion behavior of alumina-forming and oxide dispersion strengthened austenitic 316 stainless steel in supercritical water10.1016/j.corsci.2018.04.026 ↗
45. A research on the corrosion and stress corrosion cracking susceptibility of 316L stainless steel exposed to supercritical water10.1016/j.corsci.2017.08.027 ↗
46. Chemistry and corrosion research and development for the water cooling circuits of European DEMO10.1016/j.fusengdes.2018.12.095 ↗
47. Effect of salt deposit on corrosion behavior of Ni-based alloys and stainless steels in supercritical water10.1016/j.supflu.2019.104570 ↗
48. Experimental methods for studying salt nucleation and growth from supercritical water10.1016/0896-8446(91)90020-7 ↗
49. Flow characteristics of aqueous salt solutions for applications in supercritical water oxidation10.1016/j.supflu.2007.03.009 ↗
50. Precipitation of sodium chloride and sodium sulfate in water from sub- to supercritical conditions: 150 to 550 °C, 100 to 300 bar10.1016/0896-8446(94)90019-1 ↗
51. Effect of pitting corrosion on the mechanical properties of 316 grade stainless steel
52. Passivity breakdown on 436 ferritic stainless steel in solutions containing chloride10.1016/j.jmst.2018.10.030 ↗
53. Stress corrosion cracking of alloy 625 in pH 2 aqueous solution at high temperature and pressure10.5006/1.3560116 ↗
54. Investigation on early formation and evolution of oxide scales on ferritic–martensitic steels in supercritical water10.1016/j.corsci.2018.02.036 ↗
55. Corrosion behavior of niobium, tantalum and their alloys in boiling sulfuric acid solutions10.1016/S0263-4368(97)87506-3 ↗
56. I. Uehara, T. Sakai, H. Ishikawa, H. Takenaka, Corrosion behavior of tantalum and niobium in hydrobromic acid solutions (II) on passive films and hydrogen absorption, Corrosion 45 548-553.10.5006/1.3577870 ↗
57. Corrosion behavior of niobium, tantalum and their alloys in hot hydrochloric and phosphoric acid solutions10.1016/S0263-4368(99)00034-7 ↗
58. Influence of plasma and cold spray deposited Ti Layers on high-cycle fatigue properties of Ti6Al4V substrates10.1016/j.surfcoat.2012.11.067 ↗
59. Microstructure and corrosion resistance of warm sprayed titanium coatings with polymer sealing for corrosion protection of AZ91E magnesium alloy10.1016/j.surfcoat.2019.02.023 ↗
60. Changing the second phase distribution shape and improving the corrosion resistance of Mg-6.7Y-2.5Zn alloy by addition of trace Ta10.1016/j.corsci.2023.111341 ↗
61. Diffusion of Ta and its influence on oxidation behavior of nanocrystalline coatings with different Ta, Y and Al contents10.1016/j.corsci.2017.07.017 ↗
62. A comparative study of oxide scales grown on stainless steel and nickel-based superalloys in ultra-high temperature supercritical water at 800°C10.1016/j.corsci.2016.02.004 ↗
63. Corrosion behavior of Ni-based alloys in supercritical water containing high concentrations of salt and oxygen10.1021/ie401258k ↗
64. Oxidation of 316 stainless steel in supercritical water10.1016/j.corsci.2009.03.008 ↗
65. Corrosion behavior of Ni-base alloys in aqueous HCl solution of pH 2 at high temperature and pressure10.1016/j.corsci.2009.10.042 ↗
66. Oxidation behavior of Incoloy 800 under simulated supercritical water conditions10.1016/j.jnucmat.2008.12.004 ↗
67. Analyses of oxide films grown on AISI 304L stainless steel and Incoloy 800HT exposed to supercritical water environment10.1016/j.jnucmat.2011.05.007 ↗
68. High temperature corrosion and oxidation of metals10.3390/met9090942 ↗
69. On-line monitoring of oxide formation and dissolution on alloy 800H in supercritical water10.1016/j.corsci.2016.05.042 ↗
70. The effect of temperature on the corrosion rate of iron-carbon alloys
71. Role of dissolved oxygen in iron oxidation in supercritical water: Insights from reactive dynamics simulations10.1021/acs.jpcc.9b01936 ↗
72. Effects of molybdenum on the pitting of ferritic- and austenitic-stainless steels in bromide and chloride solutions10.1016/S0010-938X(02)00003-3 ↗
73. Oxidation of Fe–10Cr in O2 and in O2+H2O environment at 600°C: a microstructural investigation10.1016/j.corsci.2013.06.016 ↗
74. Oxidation of binary FeCr Alloys (Fe–2.25Cr, Fe–10Cr, Fe–18Cr and Fe–25Cr) in O2 and in O2 + H2O environment at 600 °C10.1007/s11085-010-9229-z ↗
75. Dielectric properties of anodic oxide films on tantalum10.1016/0013-4686(94)00330-4 ↗
76. Uniform corrosion of FeCrAl alloys in LWR coolant environments10.1016/j.jnucmat.2016.06.047 ↗
77. Operating results from supercritical water oxidation plants10.1021/ie000123s ↗
78. Characterization of oxide films grown on 316L stainless steel exposed to H2O2-containing supercritical water10.1016/j.supflu.2006.12.020 ↗
79. Effect of low oxygen concentration on the oxidation behavior of Ni-based alloys 625 and 825 in supercritical water10.1016/j.supflu.2017.07.008 ↗
80. Analyses of oxide films grown on Alloy 625 in oxidizing supercritical water10.1016/j.supflu.2008.07.010 ↗
81. Early oxidation of Super304H stainless steel and its scales stability in supercritical water environments10.1016/j.ijhydene.2016.04.144 ↗
82. Voltammetric current oscillations due to general and pitting corrosion of tantalum: Implications for electrochemical–mechanical planarization10.1016/j.corsci.2010.05.031 ↗
83. Point defect model for the corrosion of steels in supercritical water: Part I, film growth kinetics10.1016/j.corsci.2019.108280 ↗
84. Pitting corrosion evaluation: a review10.1088/1742-6596/1378/2/022088 ↗
85. The contrast between the pitting corrosion of 316 SS in NaCl and NaBr solutions: part I. evolution of metastable pitting and stable pitting10.1149/2.0811902jes ↗
86. Pitting of stainless steel in bromide, chloride and bromide/chloride solutions10.1016/S0010-938X(99)00056-6 ↗
87. Pitting corrosion of martensitic stainless steel in halide bearing solutions10.1016/j.corsci.2016.07.008 ↗
88. Theoretical interpretation of anion size effects in passivity breakdown10.1149/2.0571613jes ↗
89. Effect of bromide ions on the corrosion behavior of tantalum in anhydrous ethanol10.1016/j.electacta.2009.12.074 ↗
90. Corrosion behavior of niobium, tantalum and their alloys in hot hydrochloric and phosphoric acid solutions10.1016/S0263-4368(99)00034-7 ↗