A study on corrosion behavior of 15CrMo in saturated saline steam with sodium sulfate
Source abstract
Abstract
Abstract To obtain the corrosion behavior of 15CrMo exposed in saturated saline steam with Na2SO4 at the initial stage, the experiments are implemented in a novel setup. The results show corrosion products are mainly composed of FeOOH, Fe2O3 and Fe3O4. Compared with deionized steam, saline steam promotes the generation of FeOOH and Fe2O3. The generation of Fe3O4 is inhibited by salinity. The contents of FeOOH and Fe2O3 increase with temperature while that of Fe3O4 decreases. The contents of FeOOH and Fe2O3 decrease with time and that of Fe3O4 shows the reverse trend. The content of FeSO4 keeps low all the time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Petroleum Processing and Analysis · Subcritical and Supercritical Water Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Experimental investigation on gas-liquid two-phase slug flow enhanced carbon dioxide corrosion in vertical upward pipeline10.1016/j.corsci.2008.08.006 ↗
2. Formation of oxides on CoCrMo surfaces at room temperature: an XPS study10.1016/j.apsusc.2018.12.004 ↗
3. Synthesis, electrical characterization, and gas sensing properties of molybdenum oxide nanorods10.1063/1.2192571 ↗
4. A chromium oxide coated nickel/yttria stabilized zirconia electrode with a heterojunction interface for use in electrochemical methane reforming10.1039/C5RA01927C ↗
5. Experimental study on dew point corrosion characteristics of the heating surface in a 65 t/h biomass-fired circulating fluidized bed boiler10.1016/j.applthermaleng.2015.10.151 ↗
6. Experimental study and mechanism analysis on low temperature corrosion of coal fired boiler heating surface10.1016/j.applthermaleng.2015.02.003 ↗
7. Surface engineering, by detonation-gun spray coating, of 347H boiler steel to enhance its high temperature corrosion resistance
8. Experimental investigation of high-temperature corrosion properties in simulated reducing-sulphidizing atmospheres of the waterwall fireside in the boiler10.1002/cjce.23677 ↗
9. Effect of steamside oxidation and fireside corrosion degradation processes on creep life of service exposed boiler tubes10.1016/j.ijpvp.2016.05.001 ↗
10. Investigation on high temperature corrosion of water-cooled wall tubes at a 300 MW boiler10.1016/j.joei.2019.02.003 ↗
11. Prediction of silica carry-over and solubility in steam of boilers using simple correlation10.1016/j.applthermaleng.2009.07.010 ↗
12. Industrial water systems: problems, challenges and solutions for the process industries10.1016/j.desal.2006.01.042 ↗
13. Microstructure features of steam oxidation layer on 15CrMo steel tubes
14. Effect of pre-oxidation on the steam oxidation of heat-resistant steel T9210.1515/htmp-2017-0037 ↗
15. Effect of Silicon on the steam oxidation resistance of a 9%Cr heat resistant steel10.1023/B:OXID.0000016280.81734.3f ↗
16. A review of the oxidation behaviour of structural alloys in steam10.1179/095066010X12646898728165 ↗
17. Premature water-side corrosion of furnace wall tubes in a high-pressure boiler
18. Modeling the water side corrosion and hydrogen pickup of the VVER 1000 fuel clad10.2298/NTRP180606013R ↗
19. Boiler materials for ultra-supercritical coal power plants-Steamside oxidation10.1361/105994906X108756 ↗
20. Deodeshmukh · 2016
21. Analysis of chemical compositions contributable to chemical oxygen demand (COD) of oilfield produced water10.1016/j.chemosphere.2005.04.033 ↗
22. Effect of reusing the advanced-softened, silica-rich, oilfield-produced water (ASOW) on finned tubes in steam-injection boiler10.1016/j.desal.2015.06.015 ↗
23. Ni corrosion product layer during immersion in a 3.5% NaCl solution: electrochemical and XPS characterization10.4152/pea.201703127 ↗
24. Corrosion behavior of high-strength steel for flexible riser exposed to CO2-saturated saline solution and CO2-saturated vapor environments10.1007/s40195-018-0825-2 ↗
25. Temperature-dependent solubility transition of Na2SO4 in water and the effect of NaCl therein: solution structures and salt water dynamics10.1021/jp507949h ↗
26. XPS investigations on the corrosion mechanism of V(IV) conversion coatings on hot-dip galvanized steel10.1016/j.corsci.2018.04.030 ↗
27. Corrosion behaviour of 2205 duplex stainless steel in pure cultures of sulphate reducing bacteria: SEM studies, electrochemical characterisation and biochemical analyses10.1002/maco.201709649 ↗
28. Effect of gamma-FeOOH and gamma-Fe2O3 on the corrosion of Q235 carbon steel under visible light10.1149/2.0301503jes ↗
29. The role of the photovoltaic effect of gamma-FeOOH and beta-FeOOH on the corrosion of 09CuPCrNi weathering steel under visible light10.1016/j.corsci.2015.01.019 ↗
30. Simulating study of atmospheric corrosion of steels in a coastal industrial zone: effect of SO32− on the formation of β-FeOOH rust particles synthesized from FeCl3 solutions10.1016/j.corsci.2016.07.019 ↗
31. Magnetic Iron oxide nanoparticles: synthesis, stabilization, vectorization, physicochemical characterizations, and biological applications10.1021/cr900197g ↗
32. Growth of iron oxides on Ag(111) – reversible Fe2O3/Fe3O4 transformation10.1016/j.susc.2011.07.019 ↗
33. An electron microscopy study of beta-FeOOH (akaganeite) nanorods and nanotubes10.1039/B513423D ↗
34. Influences of metal ions on the formation of gamma-FeOOH and magnetite rusts10.1016/S0010-938X(01)00119-6 ↗
35. Effect of curve fitting parameters on quantitative analysis of Fe0.94O and Fe2O3 using XPS10.1016/j.elspec.2006.02.002 ↗
36. Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials10.1016/j.apsusc.2007.09.063 ↗
37. Non-lattice surface oxygen species implicated in the catalytic partial oxidation of decane to oxygenated aromatics10.1038/nchem.1245 ↗
38. Slurry impregnation of ZrO2 extrudates: controlled EggShell distribution of MoO3, hydrodesulfurization activity, promotion by Co10.1007/s10562-008-9692-1 ↗
39. Capture of gaseous elemental mercury from flue gas using a magnetic and sulfur poisoning resistant sorbent Mn/γ-Fe2O3 at lower temperatures10.1016/j.jhazmat.2010.11.034 ↗
40. Elemental mercury capture from flue gas by magnetic Mn-Fe spinel: effect of chemical heterogeneity10.1021/ie2009873 ↗
41. Nickel and iron partitioning between clay minerals, Fe-oxides and Fe-sulfides in lagoon sediments from New Caledonia10.1016/j.scitotenv.2019.06.274 ↗
42. Amorphous Fe-Co-Ni oxide for oxygen evolution reaction10.1016/j.mtener.2019.02.004 ↗
43. Gmelin’s handbook of inorganic chemistry10.1021/c160038a007 ↗
44. Fireside corrosion and steamside oxidation of 9-12%Cr martensitic steels exposed for long term testing10.1179/174327809X419168 ↗
45. Pitting corrosion characteristics of boiler water-wall tubes influenced by 20G and 15CrMo materials in Cl− solution
46. Determination of gas-liquid partition coefficients by gas chromatography10.1016/j.chroma.2003.12.019 ↗
47. Effect of dissolved inorganic salts on the isothermal vapor–liquid equilibrium of the propionic acid–water mixture10.1016/S0255-2701(02)00011-9 ↗
48. Secondary organic aerosol formation from cyclohexene ozonolysis in the presence of water vapor and dissolved salts10.1016/j.atmosenv.2008.12.026 ↗
49. A study on microstructural evolution and corrosion behavior of spark plasma sintered Fe-Cr alloy system10.1007/s10853-019-03861-6 ↗
50. Chemical passivation of unstable FeO-a mossbauer study10.1007/BF02061550 ↗
51. Thermodynamics and kinetics of FeO transferred to Fe3O4 in modified nickel slag during molten oxidation process10.1088/2053-1591/ab2eeb ↗
52. Fe-Mn binary oxide decorated diatomite for rapid decolorization of methylene blue with H2O210.1016/j.apsusc.2019.01.191 ↗