Enhancing corrosion resistance of AZ91D alloy through yttria-stabilized tetragonal zirconia (YSTZ)/MgO repaired ceramic coating with improved embrittlement cracking
Source abstract
Abstract
The oxide ceramic coating for improving the corrosion of magnesium alloy remains challenging especially generated embrittlement cracking of the coating. A remarkable ameliorating embrittlement cracking behavior has been observed in this contribution on our developed yttria-stabilized tetragonal zirconia (YSTZ)/MgO repaired ceramic coating. It is related to stabilized specially oriented YSTZ grains affected by the (101) t-ZrO 2 // (101) Y 2O 3 coherent interface and (101) YSTZ // (111) MgO semi-coherent interface continuous dislocation pinning. The high-quality repaired ceramic coating has few cracks after 48 h of immersion, which is expected to be beneficial to providing a suitable long-term protection to magnesium alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Well-oriented magnesium hydroxide nanoplatelets coating with high corrosion resistance and osteogenesis on magnesium alloy
2. A two-step surface treatment, combining fluoride pretreatment and anodic electrophoresis deposition of waterborne acrylic resin, for Mg–Li–Al–Ce alloy10.1016/j.matlet.2012.07.053 ↗
3. NaF assisted preparation and the improved corrosion resistance of high content ZnO doped plasma electrolytic oxidation coating on AZ31B alloy
4. Comparison of electrochemical corrosion behaviour of MgO and ZrO2 coatings on AM50 magnesium alloy formed by plasma electrolytic oxidation10.1016/j.corsci.2009.06.034 ↗
5. Nanoscale chemistry and ion segregation in zirconia-based ceramic at grain boundaries by atom probe tomography10.1016/j.scriptamat.2022.114603 ↗
6. Phase transformation induces plasticity with negligible damage in ceria-stabilize zirconia-base ceramics10.1016/j.actamat.2019.10.046 ↗
7. Formation and control of “intragranular” ZrO2 strengthened and toughened Al2O3 ceramics10.1016/j.ceramint.2019.12.080 ↗
8. Microstructure and properties of a nano-ZrO2-reinforced AlSi10Mg matrix composite prepared by selective laser melting10.1016/j.msea.2022.142792 ↗
9. Toughening cemented carbides by phase transformation of zirconia10.1016/j.matdes.2021.109559 ↗
10. Impacts of inclusion of additives on physical, microstructural, and mechanical properties of Alumina and Zirconia toughened alumina (ZTA) ceramic composite: a review
11. Transformation toughening in zirconia-containing ceramics10.1111/j.1151-2916.2000.tb01221.x ↗
12. Fabrication and characterizations of 8.7 mol% Y2O3-ZrO2 transparent ceramics using co-precipitated nanopowders10.1016/j.scriptamat.2019.06.029 ↗
13. Preparation and properties of composite ceramic coating containing Al2O3–ZrO2–Y2O3 on AZ91D magnesium alloy by plasma electrolytic oxidation10.1016/j.cap.2009.02.017 ↗
14. Competing mechanisms between dislocation and phase transformation in plastic deformation of single crystalline yttria-stabilized tetragonal zirconia nanopillars10.1016/j.actamat.2016.08.075 ↗
15. Analysis of interaction between dislocation and interface of aluminum matrix/second phase from electronic behavior
16. Mechanical interactions between semicoherent heterophase interfaces and free surfaces in crystalline bilayers10.1016/j.actamat.2015.04.007 ↗
17. Discerning interface atomistic structure by phase contrast in STEM: the equilibrated Ni-YSZ interface10.1016/j.actamat.2018.05.011 ↗
18. Glide dislocation nucleation from dislocation nodes at semi-coherent {1 1 1} Cu–Ni interfaces10.1016/j.actamat.2015.07.044 ↗
19. Effect of interface structure on the mechanical properties of graphene nanosheets reinforced copper matrix composites10.1021/acsami.8b09799 ↗
20. Exploding and weeping ceramics10.1038/s41586-021-03975-5 ↗
21. Crack self-healing of phytic acid conversion coating on AZ31 magnesium alloy by heat treatment and the corrosion resistance10.1016/j.apsusc.2014.06.104 ↗
22. Study on the effect of the crack closing of AlCoCrFeMnNi high entropy alloy electro-spark deposited coating by plasma nitriding on the corrosion resistance10.1016/j.jallcom.2023.171629 ↗
23. Influence of PEO coatings on mechanical and corrosion properties of Mg-7Y–1Zn alloy
24. Reducing damage extent of epoxy coating on magnesium substrate by Zr-enhanced PEO coating as an effective pretreatment10.1016/j.jma.2022.05.018 ↗
25. Transformation of plasma electrolytic oxidation coatings from crater to cluster–based structure with increase in DC voltage and the role of ZrO2 nanoparticles10.1016/j.surfcoat.2016.12.112 ↗
26. In situ formation of Al2O3–ZrO2–Y2O3 composite ceramic coating by plasma electrolytic oxidation on ZAlSi12Cu3Ni2 alloy10.1080/09603409.2017.1404683 ↗
27. Enhanced oxidation resistance of Mo-modified Si-SiC coating on C/C composites by laser-inducing10.1016/j.apsusc.2021.151786 ↗
28. Effect of lauric acid on the grain growth of CeO2-ZrO2-Y2O3-La2O3 in different periods10.1016/j.jallcom.2021.162301 ↗
29. Plasma-assisted and oxygen vacancy-engineered In2O3 films for enhanced electrochemical reduction of CO210.1016/j.apsusc.2021.150405 ↗
30. Effects of yttrium ion on formation mechanism of ZrO2-Y2O3 ceramic coatings formed by plasma electrolytic oxidation on Al-12Si alloy10.1007/s11595-014-1041-1 ↗
31. Comparison of corrosion behaviors and wettability of CMAS on Ta2O5-Y2O3 co-stabilized ZrO2 and YSZ thermal barrier coatings
32. Multi-objective optimization of surface roughness, recast layer thickness and surface crack density in WEDM of Al2124/SiCp using desirability approach
33. Three-dimensional characterization of cracks in undisturbed Mile expansive soil using X-ray computed tomography
34. Quantitative characterization of drying-induced cracks and permeability of granite residual soil using micron-sized X-ray computed tomography10.1016/j.scitotenv.2023.163213 ↗
35. Kinetics and mechanism of corrosion of oxide coating fabricated on aluminum alloy by the plasma electrolytic oxidation in molten salt10.1016/j.corsci.2022.110604 ↗
36. Composite fluoropolymer coatings on the MA8 magnesium alloy surface10.1016/j.corsci.2016.04.052 ↗
37. Effect of particles addition to solution of plasma electrolytic oxidation (PEO) on the properties of PEO coatings formed on magnesium and its alloys: a review10.1016/j.jma.2020.05.001 ↗
38. Electrochemical and modelling study of ZrNbO alloys aged under high temperature and high pressure PWR simulated conditions10.1016/j.corsci.2023.111505 ↗
39. Evaluation of the properties of anodized aluminum 6061 subjected to thermal cycling treatment using electrochemical impedance spectroscopy (EIS10.1016/j.corsci.2009.06.031 ↗
40. Self-healing plasma electrolytic oxidation (PEO) coating developed by an assembly of corrosion inhibitive layer and sol-gel sealing on AA202410.1016/j.corsci.2023.111424 ↗
41. Enhancement of corrosion resistance and antibacterial properties of PEO coated AZ91D Mg alloy by copper- and phosphate-based sealing treatment10.1016/j.corsci.2023.111218 ↗
42. A self-healing and bioactive coating based on duplex plasma electrolytic oxidation/polydopamine on AZ91 alloy for bone implants10.1016/j.jma.2022.05.020 ↗
43. CPE analysis by local electrochemical impedance spectroscopy10.1016/j.electacta.2005.02.128 ↗
44. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
45. Impedance response of a thin film on an electrode: deciphering the influence of the double Layer capacitance10.1002/cphc.202100177 ↗
46. Simultaneous EIS and in situ microscope observation on a partially blocked electrode application to scale electrodeposition10.1016/j.electacta.2005.02.117 ↗
47. Effective PEO/Silane pretreatment of epoxy coating applied on AZ31B Mg alloy for corrosion protection10.1016/j.corsci.2020.108608 ↗
48. Slow positron beam study of corrosion behavior of AM60B magnesium alloy in NaCl solution10.1016/j.corsci.2016.02.012 ↗
49. Behaviour of AZ63 Magnesium Alloy in Natural Seawater and 3.5 wt% NaCl Aqueous Solution10.20964/2018.08.32 ↗
50. Electrolytic MgO/ZrO2 duplex-layer coating on AZ91D magnesium alloy for corrosion resistance10.1016/j.corsci.2013.06.037 ↗
51. Unveiling the semicoherent interface with definite orientation relationships between reinforcements and matrix in novel Al3BC/Al composites10.1021/acsami.6b08913 ↗
52. basal slip and basal twinning in sapphire (α -Al2O3)-III. hrtem of the twin/matrix interface10.1016/1359-6454(95)00288-X ↗
53. Investigation on the phase stability of yttria-stabilized zirconia electrolytes for high-temperature electrochemical application10.1016/j.ceramint.2018.09.026 ↗
54. Influence of oxygen vacancy compensation on the structure, electronic and mechanical properties of yttrium stabilized tetragonal zirconia10.1016/j.mssp.2021.106082 ↗
55. Martensitic phase transformation induced large elastic lattice strains in Nb3Sn lamellae in NiTi–Nb3Sn eutectic composite10.1016/j.msea.2023.144672 ↗
56. Ab-initio study of interfacial strength and misfit dislocations in eutectic composites: NiAl/Mo10.1016/j.actamat.2003.10.004 ↗
57. In-situ Al2O3-Al interface contribution towards the strength-ductility synergy of Al-CuO composite fabricated by solid-state reactive sintering10.1016/j.scriptamat.2021.113825 ↗
58. Theoretical insights into the Peierls plasticity in SrTiO3 ceramics via dislocation remodelling10.1038/s41467-022-34741-4 ↗
59. An atomistic-to-microscale computational analysis of the dislocation pileup-induced local stresses near an interface in plastically deformed two-phase materials10.1016/j.actamat.2022.117663 ↗
60. Designing nanoparticles-strengthened high-entropy alloys with simultaneously enhanced strength-ductility synergy at both room and elevated temperatures10.1016/j.actamat.2022.118216 ↗
61. Atomic deformation mechanism and interface toughening in metastable high entropy alloy10.1016/j.mattod.2020.02.017 ↗
62. Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys10.1016/j.scriptamat.2021.113741 ↗