Electrochemical and immersion corrosion performance improvement of electrodeposited Fe–Ni coating: Effect of laser-induced periodic current on microstructure evolution
Source abstract
Abstract
This study developed a new electrodeposited Fe–Ni coatings using the laser-induced current waveform. This process refined grains accomponied with a mixed nanocrystalline size and alternate element content. The electrochemical and immersion corrosion performance at 3.5 wt% NaCl was improved, which is still pitting corrosion. The corrosion pits are more likely to spread around rather than in the depth direction. The enhancement mechanism is mainly attributed to the richer grain boundaries. This microstructure increases the interface transfer resistance and makes the corrosion more uniform. This study provides a potential process for preparing nanocrystalline coatings with better performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Electrochemical corrosion and electrochemical migration characteristics of SAC-1Bi-xMn solder alloys in NaCl solution10.1016/j.corsci.2023.110965 ↗
2. The effect of time dependent native oxide surface conditions on the electrochemical corrosion resistance of Mg and Mg-Al-Ca alloys10.1016/j.corsci.2022.110925 ↗
3. Wear-resistant NbMoTaWTi high entropy alloy coating prepared by laser cladding on TC4 titanium alloy10.1016/j.triboint.2023.108366 ↗
4. Significant improvement in fatigue life of titanium alloy induced by superlattice coating10.1016/j.ijfatigue.2022.107367 ↗
5. Electrodeposition of Fe–Ni alloy on Au(111) substrate: Metastable BCC growth via hydrogen evolution and interactions10.1016/j.electacta.2020.135876 ↗
6. Fracture mechanics of microcrystalline/nanocrystalline composited multilayer chemical vapor deposition self-standing diamond films10.1016/j.ceramint.2022.04.173 ↗
7. Particle and rain erosion mechanisms on Ti/TiN multilayer PVD coatings for carbon fibre reinforced polymer substrates protection
8. Sputter deposited nanocrystalline Ni and Ni–W films as catalysts for hydrogen evolution10.1016/j.molcata.2006.01.020 ↗
9. Electrodeposition of Ni-Fe alloys, composites, and nano coatings–A review10.1016/j.jallcom.2016.08.329 ↗
10. Mechanical behaviors of as-deposited and annealed nanostructured Ni–Fe alloys10.1016/j.scriptamat.2011.03.029 ↗
11. Effects of processing parameters and heat treatment on the microstructure and magnetic properties of the in-situ synthesized Fe−Ni permalloy produced using direct energy deposition10.1016/j.jallcom.2022.164415 ↗
12. Structural and magnetic properties of Ni-Fe nanowires in the pores of polymer track membranes10.1016/j.jmmm.2019.165415 ↗
13. Optimization of electrodeposition nanocrytalline Ni–Fe alloy coatings for the replacement of Ni coatings10.1016/j.jallcom.2022.163761 ↗
14. Structure and properties of electro co-deposited Ni–Fe/ZrO2 nanocomposites from ethylene glycol bath10.1016/S1452-3981(23)10949-7 ↗
15. Electrodeposition of Ni–Fe and Ni–Fe–(nano Al2O3) multilayer coatings10.1016/j.jallcom.2015.10.154 ↗
16. Evaluation of corrosion resistance of electrodeposited nanocrystalline Ni–Fe alloy coatings10.1080/00202967.2017.1338375 ↗
17. Studies on the enhanced properties of nanocrystalline Zn–Ni coatings from a new alkaline bath due to electrolyte additives10.1039/C5RA09582D ↗
18. Corrosion behaviour of electrodeposited nanocrystalline Ni–W and Ni–Fe–W alloys10.1016/j.msea.2007.02.055 ↗
19. Effect of additives on the corrosion mechanism of nanocrystalline zinc-nickel alloys in an alkaline bath10.1039/C6RA18476F ↗
20. The effect of current density on the grain size of electrodeposited nanocrystalline nickel coatings10.1016/j.surfcoat.2008.01.018 ↗
21. Electrodeposition of metals and alloys—new results and perspectives10.1016/0013-4686(94)E0023-S ↗
22. Mass transfer and electrocrystallization analyses of nanocrystalline nickel production by pulse plating10.1007/BF00249659 ↗
23. Electrodeposition mechanism and corrosion behavior of multilayer nanocrystalline nickel-tungsten alloy10.1016/j.electacta.2017.11.139 ↗
24. Improved wear resistance of alternating amorphous and crystalline layers in electrodeposited Ni–P multilayers10.1016/j.surfcoat.2020.125470 ↗
25. Hardness and tribological properties of electrodeposited Ni–P multilayer coatings fabricated through a stirring time-controlled technique10.1016/j.jmrt.2022.05.145 ↗
26. Research on Preparation of Multilayers by the Multiple Jet Electrodeposition10.1016/S1452-3981(23)07710-6 ↗
27. On the prospects of magnetic-field-assisted electrodeposition of nano-structured ferromagnetic layers10.1016/j.electacta.2022.140422 ↗
28. Preparation and characterization of Ni–AlN nanocoatings deposited by magnetic field assisted electrodeposition technique10.1016/j.ceramint.2019.09.244 ↗
29. Ultrasonic-assisted electrodeposition of Ni/diamond composite coatings and its structure and electrochemical properties10.1016/j.ultsonch.2021.105475 ↗
30. Fabrication of high-performance nickel/graphene oxide composite coatings using ultrasonic-assisted electrodeposition10.1016/j.ultsonch.2019.104858 ↗
31. Maskless zinc electrodeposition assisted by a pulsed laser beam10.1007/BF00251021 ↗
32. Laser-enhanced electrodeposition of nickel coatings10.1080/00202967.2017.1355463 ↗
33. A study on the formation conditions of amorphous nickel-phosphorus (Ni–P) alloy by laser-assisted electrodeposition10.1016/j.apsusc.2020.147707 ↗
34. Effect of laser single pulse energy on micro-structural, mechanical and corrosion properties of amorphous Ni–Fe–P alloy prepared by laser-assisted electrodeposition
35. Experimental and numerical investigation of laser-assisted electrodeposition based on amorphous forming: Laser-electrodeposition correlation and explanation of enhancing mechanism10.1016/j.jmapro.2022.10.055 ↗
36. Gamburg · 2011
37. Paunovic · 2006
38. Study on Cu–Al2O3 metal-matrix composite coating prepared by Laser-assisted electrodeposition10.1016/j.jelechem.2021.115855 ↗
39. Effects of the background environment on formation, evolution and emission spectra of laser-induced plasmas10.1016/j.sab.2012.10.003 ↗
40. Simultaneous observation of nascent plasma and bubble induced by laser ablation in water with various pulse durations10.1063/1.4919729 ↗
41. Dynamics of laser-induced cavitation in liquid10.1007/s00339-010-6056-7 ↗
42. Numerical modeling of laser generated cavitation bubbles with the finite volume and volume of fluid method, using OpenFOAM10.1016/j.compfluid.2015.11.008 ↗
43. Improvement of electrochemical deposition performance and design of Fe–Ni multilayer structure by nanosecond laser
44. Pulsed laser-assisted ionic liquid electrodeposition of gallium nanoparticles and germanium nanostructures for energy storage10.1016/j.cplett.2018.03.023 ↗
45. Pulsed laser irradiation-assisted electrodeposition of germanium in ionic liquid: From amorphous film to polycrystalline branched structures10.1016/j.materresbull.2017.05.008 ↗
46. Fabrication and characterization of electrodeposited nanocrystalline Ni-Fe alloys for NiFe2O4 spinel coatings10.1016/S1003-6326(15)63589-0 ↗
47. Synthesis and characterization of electrodeposited nanocrystalline nickel-iron alloys10.1016/S0921-5093(02)00586-5 ↗
48. Electrodeposition of nanocrystalline Ni–Fe alloys10.1016/0965-9773(95)00264-F ↗
49. Corrosion behavior of electrodeposited Wo3 thin films10.1016/j.ceramint.2019.10.159 ↗
50. Tailoring microstructure and corrosion behavior of CoNiVAlx medium entropy alloys via Al addition10.1016/j.corsci.2022.110570 ↗
51. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
52. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
53. Insight into the anisotropic electrochemical corrosion behaviors of laser metal deposited Ni-based single crystal superalloy10.1016/j.corsci.2023.111111 ↗
54. Influence of Ru-Ni-Nb combined cathode modification on corrosion behavior and passive film characteristics of Ti-6Al-4V Alloy used for oil country tubular goods10.1016/j.corsci.2022.110569 ↗
55. Understanding the Impedance of CNOs-Graphene hybrid electrode through both experimental and simulated electrochemical impedance spectrum10.1016/j.electacta.2021.137839 ↗
56. Influence of asymmetric electrode geometry on an impedance spectrum of a plasma-sprayed thermal barrier coating system10.1016/j.surfcoat.2010.01.030 ↗
57. Corrosion product film formed on the 90/10 copper–nickel tube in natural seawater: Composition/structure and formation mechanism10.1016/j.corsci.2014.11.028 ↗