Ultrasonication effect based on the coordination number on the structure of Ba 0.44 Sr 0.56 Ti (1-x) In x O 3 ceramics
Source abstract
Abstract
Abstract Lead-free Ba 0.44 Sr 0.56 Ti (1-x) In x O 3 (x % = 0, 4, 8, 10) ceramics synthesized by the solid state reaction are modified by ultrasonication. The X-ray diffraction analysis confirmed that the Ba 0.44 Sr 0.56 TiO 3 powder was obtained highly pure, which has a single phase with a monoclinic structure. Replacing In ions with Ti ions change the crystal structure because of the coordination numbers, in which different cations with different ionic radius are placed in the matrix. Cavitation effects on the powder are very different in the liquid. Both the grain size and its coordination number stay active during the deagglomeration process. The grains with the higher coordination number are harder to break. This effect obviously appeared in the XRD patterns as extra peaks and peak broadening because of the dislocation and the particle size distribution. Broadening the XRD peak width and shape confirmed that doping In changes the crystal lattice because of the crystallite smallness with different sized.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Visible light-driven photoelectrochemical water splitting on ZnO–TiO2 heterogeneous nanotube photoanodes10.1007/s10800-015-0836-x ↗
2. 25th Anniversary article: metal oxide particles in materials science: addressing all length scales10.1002/adma.201303161 ↗
3. Impedance and modulus spectroscopy characterization of lead free barium titanate ferroelectric ceramics10.1016/j.ceramint.2015.02.102 ↗
4. Piezoelectric, impedance, electric modulus and AC conductivity studies on (Bi0.5Na0.5)0.95Ba0.05TiO3 ceramic10.2298/PAC1302081R ↗
5. Impedance and modulus spectroscopy of a novel ferroelectric ceramics based on barium titanate10.1080/00150193.2014.891924 ↗
6. In-situ manganese doping of TiO2 nanostructures via single-step electrochemical anodizing of titanium in an electrolyte containing potassium permanganate: a good visible-light photocatalyst10.1016/j.ceramint.2015.07.158 ↗
7. Effect of silver sulfide decorating on structural, optical and photo catalytic properties of iron-doped titanium dioxide nanotubes films10.1007/s10854-016-5321-8 ↗
8. Reduced graphene oxide/Cu2O nanostructure composite films as an effective and stable hydrogen evolution photocathode for water splitting10.1007/s10854-017-6458-9 ↗
9. Facile and green synthesis of CuO nanoneedles with high photo catalytic activity10.1007/s10854-016-4992-5 ↗
10. Preparation of TiO 2 and WO 3 –TiO 2 nanotubes decorated with PbO nanoparticles by chemical bath deposition process: a stable and efficient photo catalyst10.1016/j.ceramint.2016.02.103 ↗
11. Growth and characterization of Ta 2 O 5 nanorod and WTa 2 O 5 nanowire films on the tantalum substrates by a facile one-step hydrothermal method10.1016/j.ceramint.2016.03.002 ↗
12. Visible light activity of sulfur-doped TiO2 nanostructure photoelectrodes prepared by single-step electrochemical anodizing process10.1007/s10008-015-2758-2 ↗
13. Fabrication, characterization and photoelectrochemical performance of chromium-sensitized titania nanotubes as efficient photoanodes for solar water splitting10.1007/s10008-015-3093-3 ↗
14. Effects of ultrasonication and conventional mechanical homogenization processes on the structures and dielectric properties of BaTiO3 ceramics10.1016/j.ultsonch.2016.07.027 ↗
15. Synthesis of tetragonal barium titanate nanoparticles via Alkoxide?Hydroxide sol-precipitation: effect of water addition10.1111/j.1551-2916.2006.01361.x ↗
16. Direct synthesis of ultrafine tetragonal BaTiO3 nanoparticles at room temperature10.1186/1556-276X-6-466 ↗
17. The effect of number of SILAR cycles on morphological, optical and photo catalytic properties of cadmium sulfide–titania films10.1007/s10854-016-5163-4 ↗
18. Structural features of nanoscale BaTiO3 powders prepared by hydro-thermal synthesis10.1007/s10832-006-0458-0 ↗
19. Synthesis of nano-sized barium titanate powder by solid-state reaction between barium carbonate and titania
20. Lufaso
21. Accelerated formation of BaTiO3 ceramics with mechanochemical processing in different liquids10.1016/j.jallcom.2016.12.369 ↗
22. Improved figure of merit of (Ba,Sr)TiO3-based ceramics by Sn substitution10.1143/JJAP.48.011402 ↗
23. 50 mol% indium substituted BaTiO3: characterization of structure and conductivity10.1016/j.ijhydene.2011.12.139 ↗
24. Structural and multiferroic properties of Fe-doped Ba0.5Sr0.5TiO3 solids10.1016/j.jmmm.2012.08.023 ↗
25. Enhancing energy storage density of (Ba, Sr)TiO3 ceramic particles by coating with Al2O3 and SiO210.1007/s10854-013-1248-5 ↗
26. Improved oxide-ion conductivity of NdBaInO 4 by Sr doping10.1039/C5TA01336D ↗
27. Enhanced oxide ion conductivity in stabilized cubic BaInO2.5 by Mn5+ doping10.1016/j.inoche.2013.04.035 ↗
28. Oxygen ion conduction in barium doped LaInO3 perovskite oxides10.1016/j.jpowsour.2014.06.006 ↗
29. Microstructure and dielectric properties of BST ceramics derived from high-energy ball-milling10.1016/j.jallcom.2013.09.031 ↗
30. BST ceramics: effect of attrition milling on dielectric properties10.1016/j.jeurceramsoc.2003.11.019 ↗
31. Densification, microstructure, and electrical properties of BaTiO 3 (BT) ceramics prepared from ultrasonically de-agglomerated BT powders10.1080/10426910903031750 ↗
32. Crystal structure of the series of barium and strontium carbonates
33. BaCO3: high-temperature crystal structures and the Pmcn→R3m phase transition at 811°C10.1007/s00269-007-0172-8 ↗
34. Increasing solar absorption for photocatalysis with black hydrogenated titanium dioxide nanocrystals10.1126/science.1200448 ↗
35. Synthesis of nano-sized barium titanate powder by solid-state reaction between barium carbonate and titania
36. About stoichiometry of polycrystalline BaTiO3 synthesized by solid-solid reaction10.1007/BF00719620 ↗
37. Bubbles in an acoustic field: an overview10.1016/j.ultsonch.2006.09.016 ↗
38. The characterization of acoustic cavitation bubbles–an overview10.1016/j.ultsonch.2010.11.016 ↗
39. Acoustic cavitation and its chemical consequences10.1098/rsta.1999.0330 ↗
40. Barium titanate derived from mechanochemically activated powders10.1016/S0925-8388(01)01925-9 ↗
41. Correlation between densification rate and microstructure evolution of mechanically activated BaTiO310.1080/00150190590965451 ↗
42. The influence of mechanical activation on sintering process of BaCO3-SrCO3-TiO2 system10.2298/SOS1203271K ↗
43. Ultrasonic de-agglomeration of barium titanate powder10.1016/j.ultsonch.2007.07.008 ↗
44. Effect of probe diameter on structure and morphological properties of TiO2 and ZrO2 powders in ultrasonication process10.21205/deufmd.2016185403 ↗
45. Synthesis, magnetic properties and X-ray analysis of Zn0.97X0.03O nanoparticles (X = Mn, Ni, and Co) using Scherrer and size–strain plot methods10.1016/j.solidstatesciences.2012.01.019 ↗
46. Cullity · 2001
47. Effect of partial substitution of in by Zr, Ti and Hf on protonic conductivity of BaInO2.510.1016/j.ssi.2010.09.029 ↗
48. An experimental study on the influence of the coordination number on grain crushing10.1080/19648189.2017.1285251 ↗
49. Importance of coordination number and bond length in titanium revealed by electronic structure investigations10.1002/pssb.201552280 ↗
50. Reaction rate theory in coordination number space: an application to ion solvation10.1021/acs.jpcc.6b00443 ↗
51. Influence of the ion coordination number on cation exchange reactions with copper telluride nanocrystals10.1021/jacs.6b02830 ↗
52. Microstructural parameters from X-ray diffraction peak broadening10.1016/j.scriptamat.2004.05.007 ↗
53. Thermal, structural and complex impedance analysis of Mn4+ modified BaTiO3 electroceramic10.1016/j.jpcs.2009.08.015 ↗
54. The effect of Mn on the microstructure and properties of BaSrTiO3 with B2O3–Li2CO310.1016/j.jeurceramsoc.2005.03.095 ↗
55. Influence of addition of copper cadmium ferrite on the dielectric and electrical behavior of BaSrTiO3 ceramics10.1016/j.ceramint.2012.04.048 ↗
56. Dielectric properties of Y-doped Ba1–xSrxTiO3 ceramics