Selective oxidation of aluminium in Mo(Al,Si)2
Source abstract
Abstract
Mo(AlxSi1-x)2 alloy with x in the range of 0.35–0.65 were prepared by a one-step spark plasma sintering. To study the exclusive formation of an α-Al2O3 scale, oxidation experiments were conducted in low and high oxygen partial pressure ambient at 1373 K; viz.: 10−14 and 0.21 atm. The oxidation kinetics follows a parabolic rate law after a transient period. A counter-diffusion process of O and Al along grain boundaries of Al2O3 scale is responsible for the equiaxed and columnar grain growth based on a two-layered microstructure. The formation of a dense equiaxed α-Al2O3 layer contributes to excellent oxidation resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. High temperature oxidation and pesting of Mo(Si,Al)210.1016/S0921-5093(97)00673-4 ↗
2. A comparative overview of molybdenum disilicide composites10.1016/0921-5093(92)90308-N ↗
3. Mechanism of MoSi2 pest during low temperature oxidation10.1557/JMR.1993.0214 ↗
4. Alloying of MoSi2 for improved mechanical properties10.1016/S0966-9795(01)00084-X ↗
5. Mechanical behavior of MoSi2 and MoSi2 composites10.1016/0921-5093(94)03246-7 ↗
6. Effect of minor alloying with Al on oxidation behaviour of MoSi2 at 1200 °C10.1016/S0921-5093(98)00972-1 ↗
7. Mo-Si-B alloys for ultrahigh-temperature structural applications10.1002/adma.201200764 ↗
8. Alumina forming high temperature silicides and carbides10.1016/j.ceramint.2003.12.046 ↗
9. Oxidation and corrosion behaviour of Fe–Cr and Fe–Cr–Al alloys with minor alloying additions10.1016/S0921-5093(97)00500-5 ↗
10. Improving the high-temperature oxidation resistance of TiB2 thin films by alloying with Al10.1016/j.actamat.2020.07.025 ↗
11. Oxidation kinetics and composite scale formation in the system Mo(Al,Si)210.1111/j.1151-2916.2002.tb00109.x ↗
12. High temperature oxidation of Mo-Si-X intermetallics (X = Al, Ti, Ta, Zr and Y)10.1016/0966-9795(95)98935-2 ↗
13. High temperature of oxidation of intermetallic compounds of Mo(Si1-xAlx)210.1016/0010-938X(93)90312-5 ↗
14. Effect of third elements on the pesting suppression of Mo-Si-X intermetallics (X = AI, Ta, Ti, Zr and Y)10.1016/0966-9795(96)00019-2 ↗
15. The intermediate and high-temperature oxidation behaviour of Mo(Si1-xAlx)2 intermetallic alloys10.1016/S0966-9795(96)00068-4 ↗
16. In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on TZM10.1016/j.msea.2008.03.020 ↗
17. Oxidation behavior of a Mo(Si,Al)2 composite at 900–1600 °C in dry air10.1007/s10853-012-6906-0 ↗
18. Oxidation behaviour of a Mo(Si,Al)2 based composite at 1500 °C10.1016/j.intermet.2011.05.002 ↗
19. Thermal properties of MoSi2 with minor aluminum substitutions10.1016/j.intermet.2006.03.013 ↗
20. Linear thermal expansion of aluminum oxide and thorium oxide from 100 to 1100 K
21. Effects of substitution of Al for Si on the lattice variations and thermal expansion of Mo(Si,Al)210.1016/j.intermet.2003.07.002 ↗
22. Influences of Al content and secondary phase of Mo5(Si,Al)3 on the oxidation resistance of Al-rich Mo(Si,Al)2-base composites10.1016/S0966-9795(03)00072-4 ↗
23. Quantitative phase analysis using the Rietveld method10.1107/S0021889887009415 ↗
24. Quantitative elemental analysis of individual microparticles with electron beam instruments
25. Thermodynamic database, lower length scale, part II: thermodynamic assessment of Al-Mo-Si-U (M3MS-12LL0602092), Lawrence Livermore National Laboratory
26. Oxidation-based materials selection for 2000 °C + hypersonic aerosurfaces: Theoretical considerations and historical experienc10.1023/B:JMSC.0000041686.21788.77 ↗
27. Thermodynamic calculation of HfB2 volatility diagram10.1007/s11669-011-9930-x ↗
28. Oxidation of ZrB2 and its composites: a review10.1007/s10853-018-2601-0 ↗
29. Modelling the thermal oxidation of ternary alloys—compositional changes in the alloy and the development of oxide phases10.1016/S1359-6454(03)00381-1 ↗
30. Promoting exclusive α-Al2O3 growth upon high-temperature oxidation of NiCrAl alloys: experiment versus model predictions10.1016/j.actamat.2004.12.014 ↗
31. High temperature oxidation behaviour of Ti2AlC ceramic at 1200 °C10.3184/096034012X13348496462140 ↗
32. Correlation between the microstructure, growth mechanism, and growth kinetics of alumina scales on a FeCrAlY alloy10.1007/s11661-007-9342-z ↗
33. Oxide-scale growth on Cr2AlC ceramic and its consequence for self-healing10.1016/j.scriptamat.2013.04.013 ↗
34. Quantification of aluminum outward diffusion during oxidation of FeCrAl alloys10.1007/s11085-005-4391-4 ↗
35. Microstructural evidence for counter-diffusion of aluminum and oxygen during the growth of alumina scales10.1179/mht.2003.030 ↗
36. Alumina scale formation: a new perspective
37. Differences in growth mechanisms of oxide scales formed on ODS and conventional wrought Alloys10.1007/BF00665269 ↗
38. Oxygen diffusivity in alumina scales grown on Al-MAX phases10.1016/j.corsci.2014.11.030 ↗
39. On the growth of Al2O3 scales10.1016/j.actamat.2013.07.024 ↗
40. The relationship between oxide grain morphology and growth mechanisms for Fe-Cr-Al and Fe-Cr-Al-Y alloys10.1149/1.2129170 ↗
41. Young · 2008
42. Mutual grain-boundary transport of aluminum and oxygen in polycrystalline Al2O3 under oxygen potential gradients at high temperatures10.2109/jcersj2.119.832 ↗
43. The effect of lutetium dopant on oxygen permeability of alumina polycrystals under oxygen potential gradients at ultra-high temperatures10.1016/j.actamat.2009.10.062 ↗
44. Mass-transfer mechanism of alumina ceramics under oxygen potential gradients at high temperatures10.2320/matertrans.MC200803 ↗
45. Prediction of oxide phases formed upon internal oxidation of advanced high-strength steels10.1007/s11085-017-9815-4 ↗