Impact of fluoride concentration on general corrosion of Mg-Zr alloy in a Na-geopolymer and alkaline solutions
Source abstract
Abstract
Abstract Corrosion of a metal in cementitious media can be limited when the pore solution of the binder contains corrosion inhibitors, as in the case of immobilization of magnesium nuclear wastes in France. This works aims to elucidate the impact of NaF on the magnesium corrosion, when it is incorporated in the Na-geopolymer formulation. The presence of NaF, even in small concentrations, considerably reduces the amount of corrosion products found on the magnesium/Na-geopolymer interface. Some concentration ranges were considered optimal for reducing corrosion and are related to the type of corrosion film formed on the metal surface, which provides greater protection.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Magnesium Oxide Properties and Applications · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Mg-Zr alloy behavior in basic solutions and immobilization in Portland cement and Na-geopolymer with sodium fluoride inhibitor10.1016/j.surfcoat.2012.05.008 ↗
2. Galvanic corrosion of Mg–Zr fuel cladding and steel immobilized in Portland cement and geopolymer at early ages10.1016/j.jnucmat.2012.12.030 ↗
3. The passive behaviour of Mg in alkaline fluoride solutions. Electrochemical and electron microscopical investigations10.1016/0010-938X(93)90238-C ↗
4. Impact of chloride and fluoride additions on surface reactivity and passivity of AM60 magnesium alloy in buffer solution10.1016/j.corsci.2012.07.011 ↗
5. Influence of halides on the dissolution and passivation behavior of AZ91D magnesium alloy in aqueous solutions10.1016/j.electacta.2008.09.055 ↗
6. The use of sodium silicate as a corrosion inhibitor in a saline drilling fluid: a nonaggressive option to the environment10.4236/jep.2016.713157 ↗
7. Study of the formation of alkaline electroless Ni-P coating on magnesium and AZ31B magnesium alloy10.1016/j.surfcoat.2017.04.059 ↗
8. The effect of NaF on the electrochemical behavior of the Mg–11Li–3.5Al–1Zn–1Sn–1Ce–0.1Mn electrode in NaCl solution10.1039/C5RA05512A ↗
9. The effects of NaF concentration on electrochemical and corrosion behavior of AZ31B magnesium alloy in a composite electrolyte10.1039/C6RA27263K ↗
10. Effects of sodium fluoride on structure and corrosion resistance of plasma electrolytic oxidation ceramic coatings on magnesium alloys10.5006/1.3479952 ↗
11. Effet de la composition chimique de la solution interstitielle de bétons jeunes sur la passivation d’un acier doux10.1051/mattech/2015016 ↗
12. Pore solution composition and chloride effects on the corrosion of steel in concrete10.5006/1.3583967 ↗
13. The effect of simulated concrete pore solution composition and chlorides on the electronic properties of passive films on carbon steel rebar10.1016/j.corsci.2016.01.027 ↗
14. Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer10.1016/j.conbuildmat.2009.12.023 ↗
15. Study of general and galvanic corrosion of Mg alloys in Na-geopolymer / NaF and its synthetic pore solution
16. Steady-state polarization response of chloride-induced macrocell corrosion systems in steel reinforced concrete — numerical and experimental investigations10.1016/j.cemconres.2015.09.021 ↗
17. Corrosion rate determination of rare-earth Mg alloys in a Na2SO4 solution by electrochemical measurements and inductive coupled plasma-optical emission spectroscopy10.1016/j.jma.2018.12.002 ↗
18. An impedance investigation of the mechanism of pure magnesium corrosion in sodium sulfate solutions10.1149/1.2401056 ↗
19. Corrosion inhibition efficiency of cysteine-metal ions blends on low carbon steel in chloride-containing acidic media10.20964/2019.03.51 ↗
20. Pourbaix · 1974
21. Song · 2011 · 3
22. Studies of inhibition of magnesium corrosion10.1149/1.2411579 ↗
23. Analysis of corrosion-induced diffusion layer in ZK60A magnesium alloy10.1149/2.1001613jes ↗
24. The formation of uniform colloidal particles of magnesium fluoride and sodium magnesium fluoride10.1006/jcis.1996.0365 ↗
25. Formation and structure of cubic particles of sodium magnesium fluoride (neighborite)10.1016/j.jcis.2007.09.036 ↗
26. Nanometer to submicrometer magnesium fluoride particles with controllable morphology10.1021/la101194w ↗
27. Formation of magnesium fluoride particles of different morphologies10.1021/la901307t ↗
28. Studies on influence of zinc immersion and fluoride on nickel electroplating on magnesium alloy AZ91D10.1016/j.apsusc.2009.04.169 ↗